EnGenius ECB300 Manuel utilisateur

Quick Installation Guide

ECB300 802.11b/g/n Wireless Client Bridge

Please verify contents of the box before continuing to set up the ECB300.

ECB300 * 1

12V/1A 100V~240V Power Adaptor * 1

RJ-45 Ethernet Cable * 1

Detachable Antenna * 2

CD with User's Manual * 1

Quick Installation Guide * 1

Hardware Installation

1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information,

verify with User Manual.

2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the ECB300 and the other

end to the RJ-45 port on the computer that will use the ECB300. Ensure that the cable is securely

connected to both the ECB300 and the Computer.

3) Connect the Power Adaptor DC Inlet to the DC-IN port of the ECB300 and the Power Adaptor to

the electrical out.

IP address configuration

1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is

on.

2) For the next steps, refer to your Operating System User Manual.

3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel,

double click Network Connections and then double click on the connection of your Network

Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.)

4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on

the interface (or Ethernet card that will use the ECB300) as 192.168.1.21 and the Subnet Mask

6709A0213740

address as 255.255.255.0. (Select Use the following IP Address radio button). Once the

computer has been prepared, proceed to setting up the ECB300.

ECB300 Setup

1) To configure ECB300, open a web browser (example: Microsoft Internet Explorer, Mozilla Firefox,

Google Chrome, etc.).

2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the ECB300)

and hit enter.

3) A login screen will appear. By default, the username of the ECB300 is admin and the password is

admin. Enter the current username and password of the ECB300 and then click Login. Refer to

the ECB300 user manual on how to change the

username and password.

4) After clicking Login with the correct username and

password, the ECB300 Main Menu will appear. If you are

successful, proceed to setting up the wireless connection.

Switching Between Operating Modes

This device can operate in the following modes: Access Point, Client Bridge, WDS, Repeater, AP Router.

1) Click on the Operation Mode link under the System navigation drop-down menu.

2) Operating Mode: Select an operating mode from the list (Access Point, Client Bridge, or Repeater)

and then click on the Apply button.

3) All basic setup is completed. Note: The wireless connection is not secure. To setup security on the

ECB300, refer to the ECB300 User Manual.

http://192.168.1.1

Autres manuels pour ECB300

Table des matières

Autres manuels EnGenius Point d'accès sans fil

EnGenius

EnGenius EOA7530 Manuel utilisateur

EnGenius

EnGenius EAP300 Manuel utilisateur

EnGenius

EnGenius ENH202 Manuel utilisateur

EnGenius

EnGenius ENH700EXT Manuel utilisateur

EnGenius

EnGenius EOC-8610 Series Manuel utilisateur

EnGenius

EnGenius caprive portal ready Manuel utilisateur

EnGenius

EnGenius ECB1750 Manuel utilisateur

EnGenius

EnGenius EOC1650 Manuel utilisateur

EnGenius

EnGenius ENH200EXT Manuel utilisateur

EnGenius

EnGenius ECB1200 Manuel utilisateur

EnGenius

EnGenius EOA7530 Manuel utilisateur

EnGenius

EnGenius ENH900EXT Manuel utilisateur

EnGenius

EnGenius ENS1750 Manuel utilisateur

EnGenius

EnGenius ENH202 Manuel utilisateur

EnGenius

EnGenius EAP900H Manuel utilisateur

EnGenius

EnGenius M2000 Manuel utilisateur

EnGenius

EnGenius M36 Manuel utilisateur

EnGenius

EnGenius EAP1200H Manuel utilisateur

EnGenius

EnGenius EWS330AP Manuel utilisateur

EnGenius

EnGenius EWS550AP Manuel utilisateur

EnGenius

EnGenius M8000 Manuel utilisateur

EnGenius

EnGenius EAP-3660 Manuel utilisateur

EnGenius

EnGenius EOC2611P Manuel utilisateur

EnGenius

EnGenius ECB7510 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur