EnGenius ECB1221R Manuel utilisateur

1

Go Wireless NZ Ltd

Unit 6, 5 Stone Street

Kaiapoi, Canterbury

New Zealand

+64 3 741 1339

www.gowifi.co.nz

EnGenius ECB-1221R WDS

Setup Guide

By Daniel Allin, Technician

(DipCN, MTCNA)

2

Go Wireless NZ Ltd

Step 1:

Connect the first EnGenius AP to your computer, log into the Web Management

Page and Navigate to the Operation Mode tab, change to AP Mode and Apply

Changes:

Step 2:

Navigate to the LAN Interface Tab and change the IP Address of the Router to a

unique unused IP Address on your network. Enter the Default Gateway (usually the IP

Address of your ADSL Modem), Apply Changes:

3

Go Wireless NZ Ltd

Step 3:

Navigate to the Wireless Basic Settings Tab and configure your SSID and Channel,

Apply Changes.

Step 4:

Navigate to the Security Tab and set your Encryption Type and Wireless Security Key,

Apply Changes:

4

Go Wireless NZ Ltd

Step 5:

On the WDS Settings Tab, Enable WDS Mode and add the Wireless MAC Address

and a description of the other WDS AP, Apply Changes:

Place this router in the desired location and connect it to your network.

Delete your Internet Explorer Temporary Internet Files and Cookies before

Proceeding.

Step 6:

Log in to the second router and change the Operation Mode to AP as we did in

step 1. Configure an IP Address and Default Gateway as shown in step 2, make sure

to use a different IP Address for this router:

5

Go Wireless NZ Ltd

Step 7:

On the Wireless Basic Settings Tab configure the exact settings as set in Step 3:

Step 8:

On the Wireless Security Tab, configure the exact settings as set in Step 4:

6

Go Wireless NZ Ltd

Step 9:

On the WDS Settings Tab, Enable WDS Mode and enter the Wireless MAC Address of

the Main AP and include a description:

Place the Second AP in the desired location; this device does not connect to your

LAN as it is a WDS Repeater.

7

Go Wireless NZ Ltd

Testing:

Move to the room with the second (Remote) WDS AP and connect to the network.

Ping all devices at the same time to ensure you have a reliable connection

throughout the whole network.

Open three command prompts and ping each device:

Ping 192.168.1.201 (Remote WDS AP)

Ping 192.168.1.200 (Main WDS AP)

Ping 192.168.1.254 (Gateway/ADSL Modem)

You should have a steady ping to each of the three devices and generally 1-3ms for

each ping. If your pings are high and intermittent, check for interference or signal

level:

8

Go Wireless NZ Ltd

Log into the Remote WDS Repeater and check that you are connected to it by

checking the associated clients on the status page:

Note: If you unplug this device whilst connected you should lose connectivity and

drop a couple of pings before auto-transitioning to the Main WDS AP.

Autres manuels pour ECB1221R

4

Autres manuels EnGenius Point d'accès sans fil

EnGenius

EnGenius EAP150 Manuel utilisateur

EnGenius

EnGenius ECB150 Manuel utilisateur

EnGenius

EnGenius ENH500 Manuel utilisateur

EnGenius

EnGenius EnStation5-ACv2 Manuel utilisateur

EnGenius

EnGenius ENH202 Manuel utilisateur

EnGenius

EnGenius EWS500AP Manuel utilisateur

EnGenius

EnGenius ENH900EXT Manuel utilisateur

EnGenius

EnGenius ECB1221R Manuel utilisateur

EnGenius

EnGenius ENS500-AC Manuel utilisateur

EnGenius

EnGenius EOC2611P Manuel utilisateur

EnGenius

EnGenius ENH202 Manuel utilisateur

EnGenius

EnGenius EWS650AP Manuel utilisateur

EnGenius

EnGenius ECB150 Manuel utilisateur

EnGenius

EnGenius EAP150 Manuel utilisateur

EnGenius

EnGenius ECB300 Manuel utilisateur

EnGenius

EnGenius EOC-5610 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur

EnGenius

EnGenius EAP600 Manuel utilisateur

EnGenius

EnGenius ENS500EXT-AC Manuel utilisateur

EnGenius

EnGenius EOC-5610 Manuel utilisateur

EnGenius

EnGenius EMD2 Manuel utilisateur

EnGenius

EnGenius EOC2611P Manuel utilisateur

EnGenius

EnGenius ENH210EXT Manuel utilisateur

EnGenius

EnGenius ENS200EXT Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur