EnGenius EAP300 Manuel utilisateur

EnGenius® Quick Installation Guide

EAP300 802.11b/g/n Wireless Access Point

Package Contents

Unpack the box and verify the contents:

•EAP300 802.11b/g/n Wireless Access Point

•Category 5 Ethernet Cable

•Power Adaptor

•Wall Mount Kit

•EAP300 802.11b/g/n Wireless Access Point Quick Installation Guide

•EAP300 802.11b/g/n Wireless Access Point Instruction Manual

•Resource CD

Setting Up the EAP300

After verifying the contents of the box, continue on to setting up the EAP300.

Hardware Installation

1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more

information, verify with User Manual.

2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP300 and the other

end to the RJ-45 port on the computer that will use the EAP300. Ensure that the cable is securely

connected to both the EAP300 and the Computer.

3) Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP300 and the Power Adaptor to

the electrical out. Once both connections are secure, verify the following:

a) Ensure that the Power light on the right is on (it will be blue).

b) Ensure that the Wireless light on the left is on (it will be blue).

c) Ensure that the LAN (Computer/EAP300 Connection) light in the middle is on (it will be

blue).

d) Once all three lights are on, proceed to setting up the computer.

Computer Setup

1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is

on.

2) For the next steps, refer to your Operating System User Manual.

3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel,

double click Network Connections and then double click on the connection of your Network

Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.)

4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on

the interface (or Ethernet card that will use the EAP300) as 192.168.1.21 and the Subnet Mask

address as 255.255.255.0. (Select Use the following IP Address radio button). Once the

computer has been prepared, proceed to setting up the EAP300.

EAP300 Setup

1) To configure EAP300, open a web browser (example: Microsoft Internet Explorer, Mozilla Firefox,

Google Chrome, etc.).

2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the EAP300)

and hit enter.

3) A login screen will appear. By default, the username of the EAP300 is admin and the password is

admin. Enter the current username and password of the EAP300 and then click Login. Refer to

the EAP300 user manual on how to change the

username and password.

4) After clicking Login with the correct username and

password, the EAP300 Main Menu will appear. If you are

successful, proceed to setting up the wireless

connection.

Wireless Setup

1) To setup the wireless connection, select Wireless on the

main menu. After selecting Wireless, select Basic.

2) Ensure that the Radio is set to Enable.

3) Select the wireless band you want (by default, it is set to 2.4 GHz B+G+N).

4) Enter the number of Wireless Points by changing the value in Enabled ESSID#.

5) Name the wireless connection by entering the name in the fields: ESSID1,ESSID2,ESSID3,

and/or ESSID4. (Note: This only applies if you have multiple SSID).

http://192.168.1.1

6) Click Apply.

7) All basic setup is completed. Note: The wireless connection is not secure. To setup security on

the EAP300, refer to the EAP300 User Manual. Also, to share internet connection, the Ethernet

Card that the EAP300 must be bridge to another Ethernet Card with an internet connection. Refer

to your Operating System User Manual for more information.

Autres manuels pour EAP300

Table des matières

Autres manuels EnGenius Point d'accès sans fil

EnGenius

EnGenius ENH200 Manuel utilisateur

EnGenius

EnGenius ECB300 Manuel utilisateur

EnGenius

EnGenius EOA3630 Manuel utilisateur

EnGenius

EnGenius EnStation 6 Manuel utilisateur

EnGenius

EnGenius EWS357-FIT Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

EnGenius

EnGenius EOC5611P Manuel utilisateur

EnGenius

EnGenius ENH202 Manuel utilisateur

EnGenius

EnGenius EOC-3220 Manuel utilisateur

EnGenius

EnGenius Neutron EWS210AP Manuel utilisateur

EnGenius

EnGenius ENH200 Manuel utilisateur

EnGenius

EnGenius EOC5611P Manuel utilisateur

EnGenius

EnGenius 11N Wireless Gigabit Multi-Function Client... Manuel utilisateur

EnGenius

EnGenius EOC-5610 Manuel utilisateur

EnGenius

EnGenius EOC5510 Manuel utilisateur

EnGenius

EnGenius EOA7530 Manuel utilisateur

EnGenius

EnGenius ENS200 Manuel utilisateur

EnGenius

EnGenius ECB600 Manuel utilisateur

EnGenius

EnGenius EnStation 6 Manuel utilisateur

EnGenius

EnGenius ETR9350 Manuel utilisateur

EnGenius

EnGenius M2000 Manuel utilisateur

EnGenius

EnGenius Neutron EWS210AP Manuel utilisateur

EnGenius

EnGenius ENS200 Manuel utilisateur

EnGenius

EnGenius EAP9550 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur