Enerset Cube Manuel utilisateur

Thermostat model: Cube

Instruction

INSTALL

01 Introduction....................................................................................................

03 Installation......................................................................................................

04 Wiring Instruction..........................................................................................

05 Thermostat Symbols.....................................................................................

06 WiFi Connection.................................

08 Troubleshooting.................................

09 Dimension...........................................

07 Function and Operation.....................

02 Technical Specifications...............................................................................

Table of

Contents

7.1 On/Off..................................................

7.2 Temporary Override Temperature....

7.3 Key-Lock.............................................

7.5 Holiday Mode......................................

7.6 Hold Mode...........................................

7.7 Edit Setting.........................................

7.8 Setup...................................................

7.9 Open Window detection....................

7.4 Set the Time........................................

APP

for Cube

TECHNICAL SPECIFICATIONS

INTRODUCTION INSTALLATION

at comfortable temp whilst minimizing energy use. Install the app on your

Cube

Supply voltage: 220-240V 50Hz

＜1W

IP class: IP21 Insert the back panel into wall box with

provided screws.

Align top part of front panel and back panel

to ﬁt these two parts. Then ﬁx them with

screw.

Step 3:

of the thermostat to get the front panel.

Step 1:

Connect the thermostat according to the

Step 2:

Step 4:

Down

Power

Conﬁrm

Return

Clock

Period

Temperature

On/Oﬀ

WiFi

Day indicator

THERMOSTAT SYMBOLS

03 04

WIRING INSTRUCTION

MAX LOAD: 16A

SENSOR

L1N1 N L

FLOOR

SENSOR

POWER

85V-265V

50/60Hz

IP 21

N1 NLL1 S2 COM S1

POWER

FLOOR SENEOR

Note:

05 06

WIFI CONNECTIONION

and click “Done”.

create family.

thermostat,when the WIFI icon ﬂash quickly, please click

“Press to connect”.

Step 1: Scan the QR code or download the Warmme

from APP store/Google browser.

Step 2: Register and log in with mobile number/

email address in the APP.

Policy and Service agreement” before

Step 4: Click “Add Device” or “+” on the

top-right to add device.

Step 6: Enter Wiﬁ password, and click “Conﬁrm”.

set temperature etc. at the control interface.

Step 7: If device added successfully, you can change the

device name and set region, then, click “Done”.

and check the Wiﬁ signals, then, use the “AP mode” in the

top right to connect again.

07 08

7.4 Set the Time

On the actual temp interface, Press and ‘Time’ will be displayed.

Press to set day.

Press to set hour.

Press to back to the actual temp interface.

7.5 Holiday Mode

FUNCTION AND OPERATION

7.1 On/Oﬀ

Press to turn On/Oﬀ.

Note:

temp when it is Oﬀ.

7.2 Temporary Override Temperature

The temporary override temp is only valid at the current event and it will not be saved.

On the actual temp interface, press to set temporary override temp.

Press to conﬁrm and back to the actual temp interface.

interface, press and hold for 3 seconds to lock or unlock all the keys.

7.3 Key-Lock

On the actual temp interface, Press and ‘Time’ will be displayed.

Press to select ‘Holiday’.

Press to set holiday days.

Press to set temp.

Press to conﬁrm and back to the actual temp interface.

* Set the holiday days to zero or double press to cancel Holiday Mode.

09 10

7.6 Hold Mode

On the actual temp interface, Press and ‘Time’ will be displayed.

Press to select ‘Hold’.

Press to set Hold ON.

Press to set temp.

Press to conﬁrm and back to the actual temp interface.

* Set hold OFF or double press to cancel Hold Mode.

7.7

thermostat runs according to the parameters of Edit.

On the actual temp interface, press and ‘Time’ will be displayed.

Press or to select ‘Edit’.

Press or to select a day.

Press or to select a event.

Press or to set the temp.

7.8 Setup

Day

Wak

Default parameters

e Leave Back Sleep

Mon-Fri

07:00 22.0°C

08:30 19.0°C

17:00 22.0°C

22:00 19.0°C

Sat/Sun 08:00 22.0°C 08:30 22.0°C 17:00 22.0°C 22:00 19.0°C

On the actual temp interface, press and ‘Time’ will be displayed.

Press or to select ‘Setup’.

Press to enter Setup.

Each parameter can be accessed by pressing and adjust the values as required.

11 12

Calibrate the temp detected by room sensor or ﬂoor sensor.

3. Sensor select:

Room sensor: Run by room sensor.

Floor sensor: Run by ﬂoor sensor.

Both sensors: Run by room sensor with ﬂoor temp limit.

4. Floor temp limit: If you choose both sensors, ﬂoor temp limit must be set to protect ﬂoor.

5. Temp unit: °C and °F can be selected.

6. Output delay:

7. Temp tolerance: The value is 1°C. The thermostat start to work when the actual temp is

1°C lower than set temp and stop to work when the actual temp is 1°C higher than set temp.

8.Brightness:

9.Energy use:

10. Schedule:

7: each day from Mon to Sun can be set individually.

5+1+1: 5 days from Mon to Fri have the same events, Sat and Sun can be set individually.

that the required temp has already been reached when the next event begins.

12. Reset: All parameters are restored to default values.

room temp plummets.

7.9

No.

Name

1 Temp calibra on

2 An -frozen func on

An -frozen

Sensor select(Room

Floor temp limit

Temp unit

6 Output delay

Schedule

Default

0.0°C

5.0°C

30 °C

Ranges

-5.0°C -- 5.0°C

ON/OFF

5.0°C -- 15.0°C

20°C -- 50°C

°F

Floor sensor

Room sensor

An -frozen

switch

Temperature

3 ,Floor) Floor temperature

sensor

Room temperature sensor

Floor temperature sensor

Both sensors

0 S

7Temp tolerance

8Brightness

Energy use

Factory reset

°C

80%

5+1+1

OFF

Back

0 S/30 S/60 S/90 S

0.5 /1 /2 /3°C°C°C°C

0%--100%

0W-4500W

ON/OFF

7/5+1+1

Yes/Back

E1: Room sensor error.

E2: Floor sensor error.

16 26 59

13 14

DIMENSION(MM)

TROUBLESHOOTING

Table des matières

Autres manuels Enerset Thermostat

Enerset

Enerset Diamond Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur