Eneo IAR-7SE2024MMA Manuel utilisateur
EN
User Manual
Gigabit Switch, Managed, 250W,
24x PoE, 4x SFP, 1000Mbps,
Wall-/Rack mounting, Desktop
IAR-7SE2024MMA
About This Document
This document is Web-based Configuration Guide, including Web network
management system (short for Web system) configuration instructions. It is intended for engineers
or anyone who needs to configure the switch by Web system.
Announcement
The information in this document is subject to change without notice.
The document is only used as operation guide, except for other promises. No warranties of any
kind, either express or implied are made in relation to the description, information or suggestion
or any other contents of the manual.
The images shown here are indicative only. If there is inconsistency between the image and
the actual product, the actual product shall govern.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
DANGER Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
WARNING Indicates a hazard with a medium or low level of risk, which if not
avoided, could result in minor or moderate injury.
CAUTION Indicates a potentially hazardous situation, which if not avoided, could
result in equipment damage, data loss, performance degradation, or
unexpected results.
NOTE Provides additional information to emphasize or supplement important
points in the main text.
Content
Configuration Instruction ..........................................................................................................1
Environments Requirements ....................................................................................................2
2.1 Hardware Requirements ....................................................................................................2
2.2 Software Requirements......................................................................................................2
3.1 Set Static IP for the Management Computer.....................................................................3
3.2 Confirm the Network Connection by Ping Command ........................................................5
3.3 Cancel the Proxy Server ....................................................................................................5
4.1 Login and Start...................................................................................................................7
4.2 Web System User Interface...............................................................................................8
4.3 Saving Configuration..........................................................................................................9
4.4 Viewing Configuration ........................................................................................................9
4.5 User Timeout......................................................................................................................9
4.6 Logging-out Web System...................................................................................................9
6.1 Port Setting.........................................................................................................................11
6.2 Storm..................................................................................................................................12
6.3 Speed Limit ........................................................................................................................13
7.1 Power Control ....................................................................................................................15
7.2 Schedule ............................................................................................................................17
8.1 Port VLAN ..........................................................................................................................19
8.2 VLAN Forward....................................................................................................................20
8.3 MAC-based VLAN..............................................................................................................21
8.4 Protocol-based VLAN.........................................................................................................21
8.5 QinQ...................................................................................................................................23
8.6 PVLAN................................................................................................................................24
9.1 QoS Setting........................................................................................................................26
9.2 DSCP .................................................................................................................................27
10.1 TRUNK...............................................................................................................................28
10.2 RSTP..................................................................................................................................29
10.3 Loopback............................................................................................................................32
10.4 Fast Ring............................................................................................................................33
10.5 CCM...................................................................................................................................35
11.1 Static Address Lock............................................................................................................36
11.2 802.1x Authentication.........................................................................................................37
11.3 RADIUS Database.............................................................................................................39
12.1 SNMP.................................................................................................................................40
12.2 Port Mirror ..........................................................................................................................42
12.3 Email Alarm........................................................................................................................43
12.4 IGMP Snooping..................................................................................................................44
12.5 DHCP.................................................................................................................................45
12.6 DHCP Relay.......................................................................................................................47
12.7 DHCPv6 Snooping.............................................................................................................48
12.8 Telnet Setting .....................................................................................................................49
13.1 Flow Statistics ....................................................................................................................50
13.2 MAC Table..........................................................................................................................51
14.1 IPAddress..........................................................................................................................52
14.2 User Management..............................................................................................................53
14.3 Log Information ..................................................................................................................54
14.4 File Management ...............................................................................................................55
14.5 Web Access Control...........................................................................................................57
14.6 One Key Smart...................................................................................................................57
1
Configuration Instruction
To facilitate configuration and the maintenance of the switch, the Web system is provided to users.
You can log in the Web system to configure and maintain devices through the graphic user interface
(GUI).
The Web-based configuration guide describes the configuration and maintenance of the switch
through the Web system. It is intended for engineers or anyone who needs to configure the switch
through the Web system.
Web System Overview
The Web system provides the functions as below.
System Status
Port Setting
PoE ( Only apply to PoE switches)
VLAN
QoS
LACP
Port Security
Network Management
Network Statistics
System Management
Please follow the instructions below to configure the Web system.
2
Environments Requirements
2.1 Hardware Requirements
The management PC recommended as below.
Make sure the management PC has already been with Ethernet port.
Use a network cable to connect the Ethernet port of PC and the Ethernet port of the switch.
2.2 Software Requirements
The browser version recommend as below.
IE10 or higher
Firefox browser
Chrome
3
Set Up Network Connection
Before login the Web system to start configuration, users need to set up the network connection as
follow steps.
Set the IP of the PC and the switch in the same network segment. The default IP address of the
switch is 192.168.1.200, network gate is 255.255.255.0.
The port to connect management PC for Web setting must be management VLAN. By default,
management VLAN is VLAN 1, and each port of the switch is VLAN1.
If you need to connect theremote network, please make sure the managementPC and the router
can do the jobs above.
This product can't assign the IP address for the management PC, please configure the
management static IP manually before web configuration.
3.1 Set Static IP for the Management Computer
Operation steps (take Windows 7 as sample)
Click <Start> to enter the <Start> menu, select <Control Panel> Double click <Network
Connection> icon, then double click the <Local Connection> icon, <Local Area Connection
Status> window pops out.
4
Click <Property> button, enter <Local Area Connection Property> window.
Select <Internet Protocol (TCP/IP)>, click <Property> button, enter <Internet Protocol (TCP/IP)
Properties> window. Select the option <Use the following IP address>, input IP address (use
arbitrary value between 192.168.1.1~ 192.168.1.254, except 192.168.1.200) and the subnet
mask (255.255.255.0).
Click "OK" to finish the configuration.
Note:
·DNS server address can be empty or be filled in with the real server address.
5
3.2 Confirm the Network Connection by Ping Command
Operation Steps as below:
Click <Start> button to enter <Start> menu, select <Run>, popping out the dialog.
Input "ping 192.168.1.200", and press enter. If there is equipment response displaying in the pop
out dialog, that means network connection succeed, otherwise please check if the network
connection is correct.
3.3 Cancel the Proxy Server
If this management PC uses proxy server to visit the internet, then the proxy service must be
prohibited as follows:
In browser, select <Tool/Internet Option> to enter <Internet Options> window.
6
Select <Connections> tab in <Internet Options> window, and click <LAN Setting> button.
Check if the <Use a proxy server for your LAN> option is selected. If selected, please deselect
the option. Then click <OK> button.
Note:
·Please follow the steps to check if the switch is installed correctly:
·Whether the physical connection of the equipment is correct?
·Use network cable to connect the product’s Ethernet port (except the console port) with
managed computer network card, and ensure the link LED of the port is on.
·Whether the computer TCP/IP agreement setting is correct?
·Management PC's IP address must be 192.168.1.x (x range is 1~254 and x can’t be 200,
otherwise it will conflict with the product IP address 192.168.1.200), subnet mask:
255.255.255.0.
·Whether the computer's port VLAN ID is 1?
·By default, the management VLAN is VLAN 1, same as each port of switch.
Now the setting up tasks are finished.
Users can login the Web system and start configuration as following.
Autres manuels pour IAR-7SE2024MMA
1
Table des matières
Autres manuels Eneo Changer
Eneo
Eneo IAM-5SE1004MUC Manuel utilisateur
Eneo
Eneo IAD-5SG1004MUC Manuel utilisateur
Eneo
Eneo IAR-7SE1024MMC Manuel utilisateur
Eneo
Eneo IAM-6SE1008IMA Manuel utilisateur
Eneo
Eneo IAM-5SE1008MUB Manuel utilisateur
Eneo
Eneo IAM-5SE1004MUB Manuel utilisateur
Eneo
Eneo IAM-5SE1004MUC Manuel utilisateur
Eneo
Eneo DS-4 Manuel utilisateur
Eneo
Eneo IAR-7SM1024MMB Manuel utilisateur
Eneo
Eneo IAR-7SE2024MMA Manuel utilisateur
