Eneo PXB-2280Z10 D Manuel utilisateur
Quick Installation Guide
1/3” Network Camera, WDR,
Day&Night, 1920x1080, 5.1-
51mm, PoE, Infrared, 10x AF
Zoom
PXB-2280Z10 D
EN
Safety Precaution
03
NETWORK AF-ZOOM CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Safety Precaution
04
NETWORK AF ZOOM CAMERA
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.
Pay attention to safety when laying the connection cable and observe that the
cable is not subjected to heavy loads, kinks or damage and no moisture can get
in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.
Contents
05
NETWORK AF ZOOM CAMERA
Safety Precaution
p.03~04
Contents
p.05
Features
p.06~07
Composition
p.07
Dimensions
p.08
Part Names
p.08
Installation Instructions
p.09~11
Operating Instructions
p.12~33
Specifications
p.34~35
Features
Key Features
06
NETWORK AF ZOOM CAMERA
• Full HD, 2.4 Mega Pixel, NETWORK CAMERA, 1920x1080(30p/25p)
• ONVIF & PSIA Conformance
• True WDR (Wide Dynamic Range)
• Improved noise figure with 2D+3DNR
• Built-in f=5.1~51mm, F1.6~F1.8 Day & Night zoom lens
(Optical 10x Auto focus zoom / Digital 32x zoom)
• Intelligent Motion Detection, Privacy Mask
• Lens Refresh, E.Zoom, Flickerless, BLC, HLC, H/V/HV Mirror,
Defog, Freeze, Defect Detection, DSS(Sens-up), ACE(D-WDR),
Zoom Preset, Sharpness
• Home Position setting
• ID / TITLE / INITAIL MESSAGE / ZOOM RATIO DISPLAY
• Enhanced Sensitivity by DSS technology
• Improved DIS(Digital Image Stabilization) function
• H.264/MJPEG dual streaming with TI DM365/368 engine
• Full duplex 2 way Audio, Alarm IN/OUT
• Max 30fps live view @ 1920x1080p
• Slot for Standard SD memory card verified up to 32GB
• Zoom & Menu Control via either Local Joystick or WEB
• OSD menu & Video sub-out for easy installation & maintenance
• Circuit protection against faulty connection in power polarity
• Isolated power supply against ground loop problem
• PoE(IEEE Std. 802.3af), 24VAC/12VDC
• 4 High power LEDs
• Dual Window, Cooling Fan
• One touch 3-Axis locking bracket, Easy Installation Pad
• IP67 Protection
Features
07
NETWORK AF ZOOM CAMERA
Compositon
General Description
• With ICR mechanism,
- Enhances its sensitivity about 10x at night time
- Can accepts the infrared light
• With 24VAC/12VDC dual power & PoE (Power Over Ethernet) design
- Offers the flexibility of installation
- Ensures the reliability
This camera realizes the natural and crisp image as you see the scene in front of
you by adopting Auto Focus Full HD(1920x1080p) camera module.
Highly detailed pictures can be achieved and color reproducibility deserves attention.
Torque Wrench:
3mm (1pc)
Video Sub-out:
Cable (1pc)
Coupler for
RJ45 Cable (1pc)
EMI Ferrite
Core (1pc)
Mounting Template
Operating
Instruction
Camera
Assembly Screw:
4 x 14mm (4pcs)
Mounting Screw:
4 x 30mm (4pcs)
Plastic Anchor:
6 x 30mm (4pcs)
Easy
Bracket
Wiring Connector
(1pc)
Cable Signal
Sticker
Dimensions
08
NETWORK AF ZOOM CAMERA
Part Names
(unit : mm)
267
108
87.30
100
86.40
75.90
80
190
DUAL WINDOW
SUNSHIELD BOLT
SUNSHIELD
FRONT CASE
EASY
BRACKET
OSD Setup
CONTROL COVER
LOCK/UNLOCK
SCREW
BRACKET
REAR CASE
ETHERNET &
POWER CABLE
Installation Instructions
09
NETWORK AF ZOOM CAMERA
• Extreme care should be taken NOT to scratch the window in front of lens.
• Care should be taken the cable is NOT to be damaged, kinked or exposed
in the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun
or spot light.
Torque Wrench
Assembly Screw
: 4x14mm
Mounting Screw
: 4x30mm
1. Locate the mounting template at the installation position and drill the ceiling or
wall if needed. ( *The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and fix it through using mounting
screws. Skip this step when an easy bracket is not installed.
3. Route the power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Fix the camera bracket through using assembly screws.
5. Set the camera’s viewing angle.
6. Put the sunshield to the camera unit and tighten the sunshield-bolts.
CAUTION
REAR VIEW
1
2
3
4
Cable exit
Installation Instructions
10
NETWORK AF ZOOM CAMERA
• Unlock the screw on the camera bracket through using the torque wrench supplied
• Set the camera’s viewing angle then lock the screw on the bracket.
Pan & Tilt adjustments
1) Pan limit:
Pan is limited to +/- 90°.
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
90° 90°
88°
90°
±90°
• on the wall • on the ceiling
■Adjustment of viewing angle with a bracket
Torque
wrench
Lock/Unlock
Screw
Table des matières
Autres manuels Eneo Caméra de sécurité
Eneo
Eneo 232572 Manuel utilisateur
Eneo
Eneo VKCD-1321SFM/MF Manuel utilisateur
Eneo
Eneo PXB-1080Z03B Manuel utilisateur
Eneo
Eneo HDC-2080Z03 Manuel utilisateur
Eneo
Eneo IPD-42F0028PAA Manuel utilisateur
Eneo
Eneo PXB-2080Z03 D Manuel utilisateur
Eneo
Eneo IPB-62M2712M5A Manuel utilisateur
Eneo
Eneo ISM-78F0021W0A Manuel utilisateur
Eneo
Eneo Fastrax IV EDC-4222 Manuel utilisateur
Eneo
Eneo 230800 Manuel utilisateur
Eneo
Eneo IPB-73M2812MWA Manuel utilisateur
Eneo
Eneo IPB-62M2712M5A Manuel utilisateur
Eneo
Eneo IEB-72M2812MCA Manuel utilisateur
Eneo
Eneo NXP-880F Series Manuel utilisateur
Eneo
Eneo NXP-880F21 Manuel utilisateur
Eneo
Eneo VKCD-12100F2812IR Manuel utilisateur
Eneo
Eneo PXD-1110F39 Instructions d'installation
Eneo
Eneo HDD-2000MIR720 Manuel utilisateur
Eneo
Eneo MEB-62V2812M0A Manuel utilisateur
Eneo
Eneo 213020 Manuel utilisateur
