Eneo MED-62V2812M0B Manuel utilisateur
EN
User Manual
1/2.8” HD Dome, Fixed,
Day&Night, 1920x1080, 12VDC,
2.8-12mm, Infrared, IP66
MED-62V2812M0B
Safety Precaution
03
ULTRA CLEAR RESOLUTION CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
ULTRA CLEAR RESOLUTION CAMERA
Safety Precaution
04
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.
Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.
ULTRA CLEAR RESOLUTION CAMERA
Contents
05
Safety Precaution
p.03~04
Contents
p.05
Features
p.06
Composition
p.07
Dimensions
p.07
Part Names
p.08
Installation Instructions
p.09~10
Operating Instructions
p.11~28
Specifications
p.29~30
ULTRA CLEAR RESOLUTION CAMERA
Features
Key Features
06
• 1/2.8” SONY Exmor CMOS sensor
• 1080P TVI mode, CVI mode, AHD Video or 960H CVBS Video Selectable
• TVI mode/CVI mode/AHD Video Transmission Distance over Coax.; 500M
• Automatically removable IR Cut filter by Dual filter switcher
• Built-in f=2.8~12mm F1.3 Mega pixel DC Auto Iris Vari-focal lens
• Sensitivity of Color 0.3 Lux / BW 0.005 Lux (@IRE 40, Sens-up On, IR Off)
• D-WDR (Wide Dynamic Range)
• Improved noise reduction 2D+3DNR(TVI mode/CVI mode/AHD), 2DNR(CVBS)
• FOCUS ASSIST for Error free focus adjustment
• 2 Auto(AE/AWB) control
• LSC (Lens Shading Compensation)
• DPC (Defective Pixel Compensation)
• Motion detection, Privacy mask, BLC/HSBLC, Defog, Sens-up(~x30),
Mirror/Flip, Freeze, Negative Image, IR Smart, Cam Title
• OSD MENU & CVBS output for easy installation & maintenance
• Built-in 30pcs IR-LED
• One-side Anti-scratch hard coated clear bubble
• Zoom & Focus Adjustment
• 3-Axis gimbal
• IP66 Protection
• Power: DC12V
07
Composition
Dimensions
(unit : mm)
ULTRA CLEAR RESOLUTION CAMERA
Video Sub-out
Cable (1pc)Mounting Template
Mounting Screw:
4 x 24mm (4pcs)
Plastic Anchor:
6.5 x 26.5mm (4pcs)
Camera
Operating Instruction
Ø144
Ø100
108
60
L-Wrench (1pc)
ULTRA CLEAR RESOLUTION CAMERA
Part Names
08
Video sub-out
Connector
3-Axis
Gimbal
Dome Cover
Bubble Dome
Dome Base
Zoom lever
Focus lever
Power Cable
OSD Control &
Video format Joystick
Video format DIP Switch
CVBS
HD
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
09
• Extreme care should be taken NOT to scratch the bubble dome surface while
the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
CAUTION
Mounting Screw
(4x24mm)
Plastic Anchor
(6.5x26.5mm)
1. Drill four holes for mounting on the ceiling or wall.
2. Place the dome base at the pre-drilled installation position and fix it by using
mounting screws.
3. Route the Power/BNC cable to the connecting place.
4. Adjust the camera’s viewing angle (Pan, Tilt, Rotation)
5. Assemble the dome cover to the dome base unit.
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
10
Zoom & focus adjustments
Limit of Pan & Tilt
1) Pan limit:
Adjusts the first pan angle by turning
the gimbal 360˚.
2) Tilt limit:
Tilt is limited to 25°min ~ 90°max. with
reference to the ceiling when the
inclination of camera module is 0°, that
is, the image is aligned horizontally.
3) Rotation limit
(Horizontal image alignment):
Adjust the rotation angle by turning
the upper gimbal 360°.
Pan
Tilt
Rotation
• Be careful with the cable twisting
during pan or tilt adjustments.
CAUTION
25º
90º
• To widen the viewing angle, turn the Zoom
to “W”(Wide) and to obtain a closer view,
turn it to “T”(Tele)
•
Turn the Focus lever to “N”(Near) or “∞”(Far)
until the sharpest focus is made.
Power Supply Connections
Camera can be operated with the regulated
or unregulated DC12V but the regulated power
supply of DC12V is recommended.
Camera is protected from the damage by the
reverse connection of polarity.
VIDEO (BNC)
POWER ( )
Zoom
Focus
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Eneo Caméra de sécurité
Eneo
Eneo IPB-62M2713MAA Manuel utilisateur
Eneo
Eneo PXB-2280Z10 D Manuel utilisateur
Eneo
Eneo EDMC-2221 Manuel utilisateur
Eneo
Eneo PXB-2080MIR B Manuel utilisateur
Eneo
Eneo MPD-68V2713P0A Manuel utilisateur
Eneo
Eneo IPD-78M3611M5A Manuel utilisateur
Eneo
Eneo VKC-1381/IR-3.6 Manuel utilisateur
Eneo
Eneo ISD-55P0010P0A Manuel utilisateur
Eneo
Eneo MPD-62M2812P0A Manuel utilisateur
Eneo
Eneo MPP-62A0020M0A Manuel utilisateur
Eneo
Eneo EDC-3371 Manuel utilisateur
Eneo
Eneo IPP-62A0012M0A Manuel utilisateur
Eneo
Eneo ISM-52F0043MPA Manuel utilisateur
Eneo
Eneo PXB-2080Z03 D Manuel utilisateur
Eneo
Eneo IEB-63F0037M0A Manuel utilisateur
Eneo
Eneo IND Series Manuel utilisateur
Eneo
Eneo PXD-2030PTZ1080 Instructions d'installation
Eneo
Eneo VKC-13140F2810IR Manuel utilisateur
Eneo
Eneo IPD-72M2712M5A Manuel utilisateur
Eneo
Eneo IPD-68M3611P5A Manuel utilisateur
