Eneo PXB-2080MIR B Manuel utilisateur

Quick Installation Guide

Mega Pixel Network Camera

PXB-2080MIR B

Safety Precaution

FULL-HD NETWORK CAMERA

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Safety Precaution

FULL-HD NETWORK CAMERA

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual appearance of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

Contents

FULL-HD NETWORK CAMERA

Safety Precaution

p.03~04

Contents

p.05

Features

p.06

Composition

p.07

Dimensions

p.08

Part Names

p.09

Installation Instructions

p.10~12

Operating Instructions

p.13~26

Specifications

p.27~28

Features

Key Features

General Description

FULL-HD NETWORK CAMERA

• Full HD, WDR, NETWORK CAMERA 1920 x 1080/30p(25p)

• ONVIF S & PSIA Conformance

• True Wide Dynamic Range

• Built-in Mega Pixel Vari-focal Lens (f=2.8~10mm)

• DUAL Filter Switcher

• Improved Noise figure with the enhanced 3D-NR

• Intelligent Focus Indicator on Screen which helps to get the sharpest focus.

• Pointing Zoom which enables the flexible zooming at any area.

• Smart Motion Zoom in combining with Pointing Zoom.

• Motion Detect, Privacy Mask, DeFog, Sens-up(x8), BLC/HLC, D-Zoom(1.1x~8x)

• H.264 / MJPEG dual streaming

• Slot for Standard SD memory card up to 32GB

• Two way Audio & Alarm input /output

• Menu Control via either Local Joystick or WEB

• External Zoom & Focus Adjustment

• OSD MENU & Video Sub-out port for easy installation & Maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• IR-LED 40pcs.

• PoE(IEEE Std. 802.3af)

• IP 67 Protection

• Dual Window

• One touch 3-Axis bracket

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accept the infrared light

• With PoE as well as 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

• With Intelligent Focus Indicator and FOCUS ADJUST menu,

- Offers easy adjustment of sharp focus

- Eliminates the mistake of the erratic focus adjustment

Composition

FULL-HD NETWORK CAMERA

Torque Wrench:

3mm (1pc)

Video Sub-out Cable (1pc) Coupler for

RJ45 Cable (1pc)

Assembly Screw:

4 x 14mm (4pcs)

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Mounting Template

Easy Bracket

Operating InstructionNetwork Camera

EMI Ferrite Core (1pc)

Dimensions

FULL-HD NETWORK CAMERA

(unit : mm)

267

108

87.30

100

86.40

75.90

190

Part Names

FULL-HD NETWORK CAMERA

DUAL WINDOW

ETHERNET &

POWER CABLE

SUNSHIELD BOLT

REAR

VIEW

SUNSHIELD

FRONT CASE

EASY

BRACKET

OSD Setup

CONTROL COVER

BRACKET

REAR CASE

FOCUS ZOOM

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken the cable is NOT to be damaged, kinked or exposed in the

hazardous area.

• Do not expose the camera directly to a strong light source such as the sun or spot

light.

Installation Instructions

FULL-HD NETWORK CAMERA

Torque Wrench

Assembly Screw

: 4x14mm

Mounting Screw

: 4x30mm

1. Locate the mounting template at the installation position and drill the ceiling or wall if

needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting screws

(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the Ethernet & Power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws (4x14mm).

5. Set the camera’s viewing angle and adjust zoom/focus of lens by using the torque wrench.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

CAUTION

REAR VIEW

Cable exit

Table des matières

Autres manuels Eneo Caméra de sécurité

Eneo

Eneo VKC-1338A/PIR Manuel utilisateur

Eneo

Eneo IED-64M2812MAA Manuel utilisateur

Eneo

Eneo 219547 Manuel utilisateur

Eneo

Eneo PXD-2018PTZ1080 Manuel utilisateur

Eneo

Eneo MEC-52C0000M0A Manuel utilisateur

Eneo

Eneo MED-62V2713M0A Manuel utilisateur

Eneo

Eneo VKC-13120F2810IR Manuel utilisateur

Eneo

Eneo IED-62F0036M0A Manuel utilisateur

Eneo

Eneo VKC-12120F2810IR Manuel utilisateur

Eneo

Eneo VKCD-12100F2812IR Manuel utilisateur

Eneo

Eneo IPD-73M2812M0A Manuel utilisateur

Eneo

Eneo NXD-2030PTZ1080IR Manuel utilisateur

Eneo

Eneo NXB-980IR3516M Instructions d'installation

Eneo

Eneo IPD-72A0003M0B Manuel utilisateur

Eneo

Eneo Fastrax III Series Manuel utilisateur

Eneo

Eneo HDD-2018PTZ1080 Manuel utilisateur

Eneo

Eneo HDD-2110M1080 Manuel utilisateur

Eneo

Eneo VKC-1416B-/PP Manuel utilisateur

Eneo

Eneo VKC-1324A/W3 Manuel utilisateur

Eneo

Eneo IED-62V2812M0B Manuel utilisateur

Eneo

Eneo IPD-62M2713MAA Manuel utilisateur

Eneo

Eneo TPP-62A0012M0A Manuel utilisateur

Eneo

Eneo HDB-2280Z10IR D Manuel utilisateur

Eneo

Eneo MPD-62V2812P0A Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur