Endress+Hauser Liquistation CSF39 Manuel utilisateur

Products Solutions Services

Operating Instructions

Liquistation CSF39

Automatic sampler for liquid media

BA01407C/07/EN/06.20

71473507

2020-03-19

Valid as of version

01.07.00

Liquistation CSF39 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 5

1.1 Warnings ............................ 5

1.2 Symbols .............................. 5

1.3 Symbols on the device ................... 5

1.4 Documentation ........................ 6

2 Basic safety instructions ............ 7

2.1 Requirements for personnel ............... 7

2.2 Designated use ........................ 7

2.3 Workplace safety ....................... 7

2.4 Operational safety ...................... 8

2.5 Product safety ......................... 9

3 Product description ................ 10

3.1 Device design ......................... 10

3.2 Equipment architecture ................. 11

3.3 Terminal diagram ..................... 12

4 Incoming acceptance and product

identification ..................... 13

4.1 Incoming acceptance ................... 13

4.2 Product identification ................... 13

4.3 Scope of delivery ...................... 14

4.4 Certificates and approvals ............... 14

5 Installation ....................... 15

5.1 Installation conditions .................. 15

5.2 Installation .......................... 18

5.3 Post-installation check .................. 20

6 Electrical connection .............. 21

6.1 Connecting the sampler ................. 21

6.2 Connecting modules and sensors .......... 25

6.3 Terminal assignment for input/output

signals .............................. 31

6.4 Connection conditions .................. 31

6.5 Connecting additional inputs, outputs or

relays .............................. 33

6.6 Connecting digital communication ......... 35

6.7 Hardware settings ..................... 37

6.8 Ensuring the degree of protection .......... 38

6.9 Post-connection check .................. 39

7 System integration ................ 40

7.1 Web server .......................... 40

7.2 Service interface ...................... 42

7.3 Fieldbuses ........................... 42

8 Operation options ................. 44

8.1 Overview ............................ 44

8.2 Access to the operating menu via the local

display ............................. 45

8.3 Configuration options .................. 46

9 Commissioning .................... 49

9.1 Function check ....................... 49

9.2 Setting the operating language ............ 49

9.3 Configuring the measuring device .......... 49

10 Operation ......................... 54

10.1 Display ............................. 54

10.2 General settings ....................... 56

10.3 Programming ........................ 72

10.4 Inputs .............................. 94

10.5 Outputs ............................. 99

10.6 Additional functions .................. 107

11 Diagnostics and troubleshooting .. 127

11.1 General troubleshooting ................ 127

11.2 Diagnostic information on local display ..... 128

11.3 Diagnostic information via web browser .... 128

11.4 Diagnostic information via fieldbus ........ 128

11.5 Adapting the diagnostic information ...... 129

11.6 Overview of diagnostic information ....... 131

11.7 Pending diagnostic messages ............ 140

11.8 Diagnosis list ........................ 140

11.9 Logbooks ........................... 140

11.10 Device information ................... 146

11.11 Simulation .......................... 148

11.12 Device test .......................... 150

11.13 Resetting the measuring device .......... 153

11.14 Information on operating times .......... 153

11.15 Status of inputs/outputs ................ 153

11.16 Firmware history ..................... 154

12 Maintenance .................... 157

12.1 Recommended maintenance ............ 157

12.2 Calibration ......................... 158

12.3 Replacing the pump tube ............... 161

12.4 Cleaning ........................... 163

12.5 Replacing the rechargeable batteries ...... 167

12.6 Technical support .................... 168

13 Repair ........................... 169

13.1 Spare parts ......................... 169

13.2 Return ............................. 171

13.3 Disposal ........................... 172

14 Accessories ...................... 173

14.1 Measuring cable ..................... 173

14.2 Sensors ............................ 174

Table of contents Liquistation CSF39

4 Endress+Hauser

15 Technical data ................... 178

15.1 Input .............................. 178

15.2 Binary input, passive .................. 178

15.3 Temperature inputs .................. 178

15.4 Analog input, passive/active ............ 178

15.5 Output ............................ 178

15.6 Current outputs, active ................. 179

15.7 Relay outputs ........................ 180

15.8 Protocol-specific data .................. 180

15.9 Power supply ........................ 181

15.10 Performance characteristics ............. 182

15.11 Environment ........................ 183

15.12 Process ............................ 184

15.13 Mechanical construction ............... 184

Index ................................. 186

Liquistation CSF39 About this document

Endress+Hauser 5

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious

injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious

injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of

non-compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to

property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

About this document Liquistation CSF39

6 Endress+Hauser

1.4 Documentation

The following manuals which are available on the complement these Brief Operating

Instructions Operating Instructions:

• Brief Operating Instructions for

• Operating Instructions for Memosens, BA01245C

• Software description for Memosens inputs

• Calibration of Memosens sensors

• Sensor-specific diagnostics and troubleshooting

• Operating Instructions for HART communication, BA00486C

• Onsite settings and installation instructions for HART

• Description of HART driver

• Guidelines for communication via fieldbus and web server

• HART, SD01187C

• PROFIBUS, SD01188C

• Modbus, SD01189C

• Web server, SD01190C

• Web server (optional), SD01190C

• EtherNet/IP, SD01293C

• Special Documentation: Sampler application manual SD01068C

• Documentation on other devices in the Liquiline platform:

• Liquiline CM44xR (DIN rail device)

• Liquiline System CA80 (analyzer)

• Liquiline System CAT8x0 (sample preparation)

• Liquistation CSFxx (sampler)

• Liquiport CSP44 (sampler)

Liquistation CSF39 Basic safety instructions

Endress+Hauser 7

2 Basic safety instructions

2.1 Requirements for personnel

• Installation, commissioning, operation and maintenance of the measuring system may

be carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the

specified activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions

and must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

Liquistation CSF39 is a stationary sampler for liquid media. The samples are taken

discontinuously using a vacuum pump or peristaltic pump and are then distributed into

sampling containers and refrigerated.

The sampler is designed for use in the following applications:

• Communal and industrial wastewater treatment plants

• Laboratories and water management offices

• Monitoring of liquid media in industrial processes

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted. The

manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

• Regulations for explosion protection

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable international standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Basic safety instructions Liquistation CSF39

8 Endress+Hauser

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

LCAUTION

Cleaning not switched off during calibration or maintenance activities

Risk of injury due to medium or cleaning agent!

‣If a cleaning system is connected, switch it off before removing a sensor from the

medium.

‣If you wish to check the cleaning function and have therefore not switched off the

cleaning system, wear protective clothing, goggles and gloves or take other appropriate

measures.

Liquistation CSF39 Basic safety instructions

Endress+Hauser 9

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

Devices connected to the sampler must comply with the applicable safety standards.

2.5.2 IT security

We only provide a warranty if the device is installed and used as described in the

Operating Instructions. The device is equipped with security mechanisms to protect it

against any inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Product description Liquistation CSF39

10 Endress+Hauser

3 Product description

3.1 Device design

A complete sampling unit comprises:

• Controller with display, soft keys and navigator

• Vacuum or peristaltic pump for sampling

• PE sample bottles, self-emptying

• Sampling chamber temperature regulator (optional) for safe sample storage

• Suction line with suction head

A0024519

 1 Example of a Liquistation CSF39, version with vacuum pump

1 Controller

2 Window (optional)

3 Dosing chamber door

4 Suction line connection

5 Sampling chamber door

6 Cleaning nozzle

7 Sampling container, 2 x

15000 ml, PE

8 Drain hose

9 Distribution arm

10 Vacuum system, e.g. Dosing

system with conductive

sample sensor

A0024521

 2 Example of a Liquistation, version with peristaltic pump

1 Controller

2 Window (optional)

3 Dosing chamber door

4 Suction line connection

5 Sampling chamber door

6 Cleaning nozzle

7 Sampling container, 2 x

15000 ml, PE

8 Drain hose

9 Distribution arm

10 Peristaltic pump

LWARNING

Risk of injury

Danger of injury due to rotating parts

‣Secure the sampler against unintentional start-up whilst you work on the opened hose

pump.

Autres manuels pour Liquistation CSF39

Table des matières

Autres manuels Endress+Hauser Équipement de laboratoire

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena TOPwave Manuel utilisateur

Endress+Hauser

Endress+Hauser ASP Station 2000 Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Density Manuel utilisateur

Endress+Hauser

Endress+Hauser KIO1 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Analytik Jena UVP DigiDoc-It Mode d’emploi

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ-M Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena qTOWER iris Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena Biometra TAdvanced Comment utiliser

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne 96 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquistation CSF39 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Analytik Jena CyBio SELMA Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant PQ 9000 Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena multi N/C 2100 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena qTOWER Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manuel

Endress+Hauser

Endress+Hauser Analytik Jena CyBio FeliX Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena Biometra TOne Comment utiliser

Endress+Hauser

Endress+Hauser analytikjena Biometra TRIO Comment utiliser

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Series Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquistation CSF33 Caractéristiques techniques

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur