LIMITED WARRANTY
(a) Supplier warrants that each ScripTalk Printer Model ST400 purchased by Veterans Administraon for use
at its pharmacy locaon(s) will be free from defects or errors in materials, design, and workmanship and will
conform in all material respects to Supplier’s technical specicaons. Except where this limited warranty
becomes void pursuant to (b) below, this limited warranty will connue for one year from the date of Veterans
Administraon’s receipt of the Printer purchased. During the warranty period, Supplier will either repair
or replace the Printer at Supplier’s sole elecon as to which one applies and at Supplier’s cost. Such repair
or replacement will be Supplier’s sole obligaon and Veterans Administraon’s sole remedy and will be
condioned upon Supplier receiving wrien noce of such claimed defect and, at Supplier’s opon, Veterans
Administraon will return the Printer to Supplier, with shipping costs to be paid by Supplier.
(b) This limited warranty will be void to the extent: (i) Veterans Administraon’s subcontractor, agents,
employees or designees removes Printer casing or makes or aempts to make any modicaons, repairs
or addions to the Printer; or (ii) the Printer is not maintained or operated in accordance with Supplier’s
documentaon, or has been subjected to misuse, abnormal condions or grossly negligent handling or
operaon; or (iii) Veterans Administraon resold, leased or rented the Printer to or for the use by any person
other than Veterans Administraon.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER REPRESENTATIONS AND WARRANTIES
OF SUPPLIER, EXPRESS OR IMPLIED, WRITTEN OR ORAL; SUPPLIER DISCLAIMS AND EXCLUDES ANY
IMPLIED WARRANTY, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SUPPLIER BE LIABLE FOR LOSS OF USE, LOSS
OF PROFITS, PUNITIVE DAMAGES, ATTORNEY’S FEES AND EXPENSES, CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES, OR ANY OTHER INDIRECT DAMAGES WHATSOEVER.
PRECAUTIONS FOR LOCATION AND ENVIRONMENT
Be sure the surface the ST400 printer is sing on and the environment around it sasfy the following
characteriscs for reliable and safe operaon.
• Place the printer on a surface that is at, level and free from vibraon
• Avoid environments with high temperature and humidity, and ones where rapid changes to
temperature and humidity are possible
• Avoid locaons where the printer may be exposed to water, oil, dust or direct sunlight
Failure to adhere to the recommendaons listed above may result in a shortened life span for the printer.
POWER SUPPLY
To avoid the risk of malfuncon, follow these guidelines for supplying power to the printer:
• Use only the power supply included with the ST400 printer (Output: 24V, 2.7A)
• Plug the power supply into a grounded power outlet
• Avoid plugging the power supply into an outlet shared by or near a heater, refrigerator or other large
appliance that draws a large amount of power
