Emerson Daniel Series Manuel utilisateur
User manual
P/N 3-9008-507, Rev AF
September 2020
Daniel™ Series 1500 Liquid Turbine Meter
NPS 1 through 2.5
Safety and approval information
This Daniel product complies with all applicable European directives when properly installed in accordance with the instructions in
this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration of conformity,
with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the internet
at www.emerson.com or through your local Daniel support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at http://
www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the user manual.
Product data sheets and manuals are available from the Daniel web site at http://www.emerson.com.
Return policy
Follow Emerson procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Emerson employees. Emerson will not accept your
returned equipment if you fail to follow Emerson procedures. Return procedures and forms are available on our web support site
at www.emerson.com, or by phoning the Emerson Customer Service department.
Emerson Flow customer service
Email:
•Worldwide: [email protected]
•Asia-Pacific: [email protected]
Telephone:
North and South America Europe and Middle East Asia Pacific
United States 800-522-6277 U.K. 0870 240 1978 Australia 800 158 727
Canada +1 303-527-5200 The Netherlands +31 (0) 704 136 666 New Zealand 099 128 804
Mexico +41 (0) 41 7686 111 France 0800 917 901 India 800 440 1468
Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000
Central & Eastern +41 (0) 41 7686 111 Japan +81 3 5769 6803
Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
2
Contents
Part I Plan
Chapter 1 Introduction.............................................................................................................. 7
1.1 Purpose of this manual................................................................................................................ 7
1.2 Hazard messages.........................................................................................................................7
1.3 Personnel qualifications...............................................................................................................7
1.4 Warranty restrictions................................................................................................................... 9
1.5 Assistance....................................................................................................................................9
1.6 Description of the Series 1500 Liquid Turbine Meter (LTM)........................................................ 10
1.7 Agency certifications for the Series 1500 LTM............................................................................31
Chapter 2 Operating conditions and specifications...................................................................33
2.1 Operating conditions for the liquid turbine meter......................................................................33
2.2 Specifications for the LTM ......................................................................................................... 38
Chapter 3 Turbine meter handling............................................................................................47
3.1 Receive the turbine meter..........................................................................................................47
3.2 Store the turbine meter............................................................................................................. 47
Chapter 4 Prepare the turbine meter for use.............................................................................49
4.1 Lifting conditions.......................................................................................................................49
4.2 Lifting requirements for personnel.............................................................................................50
4.3 Configuration of the turbine meter............................................................................................53
Part II Install
Chapter 5 Installation prerequisites......................................................................................... 63
5.1 Pre-start checks......................................................................................................................... 63
5.2 Torque information................................................................................................................... 63
5.3 Tools required for LME disassembly/assembly............................................................................63
Chapter 6 Installation procedure..............................................................................................65
6.1 Cathodic protection...................................................................................................................65
6.2 Mechanical components assembly............................................................................................ 65
6.3 Assemble the electronic components........................................................................................ 66
Chapter 7 Testing.....................................................................................................................69
7.1 Test the turbine meter...............................................................................................................69
Part III Operate
User manual Contents
P/N 3-9008-507 September 2020
User manual 3
Chapter 8 Operation parameters..............................................................................................73
8.1 Operation overview................................................................................................................... 73
Part IV Maintain
Chapter 9 Planned maintenance...............................................................................................77
9.1 Maintenance considerations......................................................................................................77
9.2 Tools required for mechanical components............................................................................... 77
9.3 Prepare for mechanical disassembly.......................................................................................... 78
9.4 Mechanical assembly................................................................................................................. 87
9.5 Electronics enclosure disassembly............................................................................................. 94
9.6 Electronics enclosure assembly..................................................................................................95
9.7 Replace the preamplifier............................................................................................................96
9.8 Planned maintenance tasks....................................................................................................... 97
Chapter 10 Corrective maintenance........................................................................................... 99
10.1 Turbine meter troubleshooting............................................................................................... 99
10.2 Verify the return to operational condition................................................................................99
Chapter 11 Spare parts.............................................................................................................101
11.1 Recommended spare parts....................................................................................................101
Chapter 12 Decommission the turbine meter........................................................................... 103
12.1 Shut down the turbine meter.................................................................................................103
12.2 Turbine meter disassembly/assembly....................................................................................103
12.3 Shipment of the meter...........................................................................................................104
Contents User manual
September 2020 P/N 3-9008-507
4 Daniel Series 1500 Liquid Turbine Meter, NPS 1-2.5
Part I
Plan
User manual Plan
P/N 3-9008-507 September 2020
User manual 5
Plan User manual
September 2020 P/N 3-9008-507
6 Daniel Series 1500 Liquid Turbine Meter, NPS 1-2.5
1 Introduction
1.1 Purpose of this manual
Emerson Daniel designed this manual to guide owners and personnel in the installation,
operation and maintenance of the DanielTM Series 1500 Liquid Turbine Meter Manual,
3-9008-507. It is imperative that product owners and operation personnel read and follow
the information contained in this manual to ensure that the turbine meter is installed
correctly and is operating according to the design, certifications and safety considerations.
1.2 Hazard messages
This document uses the following criteria for hazard messages based on ANSI standards
Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can occur if a
situation is not avoided. There is no credible risk of physical injury.
Physical access
NOTICE
Unauthorized personnel can potentially cause significant damage and/or misconfiguration
of end users' equipment. Protect against all intentional or unintentional unauthorized use.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access to protect users' assets. This is true for all
systems used within the facility.
1.3 Personnel qualifications
Read and follow all instructions, dangers, warnings, and cautions to avoid personal injury
or property damage during system operation. Emerson is not responsible for damage or
injury resulting from unsafe use of products, lack of maintenance, incorrect installation of
equipment or system operation. If in doubt about any applications and safety precautions
described in this document, contact Emerson.
User manual Introduction
P/N 3-9008-507 September 2020
User manual 7
Inform and train all personnel in the proper installation, operation, and maintenance of
this product. To ensure safe and proper performance, only informed and trained personnel
should install, operate, repair and maintain this product. For further questions about
training requirements, contact your local Emerson representative.
Operations risk assessment must be used and followed in conjunction with this document
when performing all online retrieval operations.
Ensure that all end user and installation specific safety requirements are read, understood
and adhered to.
Ensure that any operator that is conducting work on the equipment, is following end user
guidelines on the use of protective equipment including, but not limited to:
•Safety helmet or hard hat
•Steel-toed shoes
•Safety glasses
•Working gloves (suitable for mechanical operations)
•Chemical resistant latex gloves or the equivalent
•Long-sleeved, fire-retardant shirt and fire-retardant trousers or full-length fire
retardant coveralls
Additional PPE may be required depending on facility requirements and MSDS
requirements, if applicable. Failure to comply may result in personnel injury.
WARNING
RISK TO PERSONNEL AND EQUIPMENT
Failure to follow the installation, operation or maintenance instructions for a Daniel
product could lead to serious injury or death from explosion or exposure to dangerous
substances. To reduce the risk:
•Comply with all information on the product, in this manual, and in any local and
national codes that apply to this product.
•Do not allow untrained personnel to work with this product.
•Use Daniel parts and work procedures specified in this manual.
NOTICE
Observe all precautionary signs posted on the equipment to avoid serious injury.
WARNING
RISK TO PERSONNEL AND EQUIPMENT
Operation of this product on pressurized lines may potentially imply operational risk for
personnel and equipment from the potential escape of hot gas or liquid, which could
result in serious injury.
Observe all precautionary signs on the equipment.
Introduction User manual
September 2020 P/N 3-9008-507
8 Daniel Series 1500 Liquid Turbine Meter, NPS 1-2.5
WARNING
RISK TO PERSONNEL AND EQUIPMENT
The operation of the Daniel product involves heavy equipment handling. Observe the
following guidelines to avoid potentially serious injury:
•Be aware of your limitations and ask for assistance if needed.
•Do not attempt to lift weight beyond your capacity.
•Lift with your legs, not your back.
Note
Mechanical lifting tools may also be used in some locations to reduce risk.
NOTICE
Attending the training course for this product is not considered sufficient for operating the
tool on pressurized lines. Emerson requires a two-man crew with formal training.
Additionally, at least one of the operators must have a record of extensive field experience
and be certified for this work.
Emerson assumes no responsibility for incidents, or consequences of incidents, occurring
as a result of the use of this product by others than Emerson or its designated personnel,
and have no liability whatsoever for any such work.
Consult Emerson for more details on both training and certification.
1.4 Warranty restrictions
Visually inspect all components for shipping damage. If shipping damage is found, notify
the carrier at once. Shipping damage is not covered by the warranty. The carrier is
responsible for all repair and replacement costs resulting from shipment damage.
1.5 Assistance
The Emerson Global Service Center is organized through a network of service centers
worldwide, and supports all service requirements or technical queries. For the Product
Support Help Desk, go to: http://www.emerson.com or contact your nearest Emerson
service provider.
User manual Introduction
P/N 3-9008-507 September 2020
User manual 9
1.6 Description of the Series 1500 Liquid Turbine
Meter (LTM)
1.6.1 General features of the turbine meter
The Daniel Series 1500 Liquid Turbine Meter (LTM) is a volumetric flow metering and
transmitting device used for accurate measurement of hydrocarbons and other related
process fluids. The design allows high operational flow rates, extended flow ranges and
sustained performance capability.
The turbine meter is designed for use within the guidelines of API Manual of Petroleum
Measurement Standards (MPMS), Chapter 5.3 and test procedures of API MPMS, Chapter 4
(Prover systems).
The meter consists of two main parts: Local Mounted Enclosure (LME) assembly and the
meter body housing assembly. For certain functions, the meter will have a Remote
Mounted Enclosure (RME), another version of the LME.
The LME is an explosion-proof, weather-resistant housing for dual pickoffs, as well as an
encapsulated preamplifier. It also serves as the mechanical mounting connection
necessary for local and remote accessories.
Note
Daniel offers electronic enclosures with different housing materials and electronic
configurations.
Local Mounted Enclosure (LME)
The LME consists of an electrical enclosure and a solid cover made of stainless steel. This
configuration contains a mounting bracket and a preamplifier which works with two
standard pickoff coils mounted into the meter housing.
The electrical enclosure contains an external and an internal grounding lug. The two
enclosure openings are plugged with stainless steel plugs. Refer to Operating conditions
and specifications for more specifications.
LME - High temperature
The LME - High temperature consists of an electrical enclosure and a solid cover both
made of stainless steel. This configuration contains one mounting bracket and two high
temperature terminal blocks which are the connections between the high temperature
pickoff coils and the flex cable.
Important
The customer provides and installs a flex cable.
The flex cable is the connection between the preamplifier that is assembled into a Remote
Mounted Enclosure (RME), not more than 6 meters from the center of the meter housing
to the center of the RME.
The electrical enclosure contains an external and an internal grounding lug. The two
enclosure openings are plugged. Refer to Operating conditions and specifications.
Introduction User manual
September 2020 P/N 3-9008-507
10 Daniel Series 1500 Liquid Turbine Meter, NPS 1-2.5
Autres manuels pour Daniel Series
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Emerson Instrument de mesure
Emerson
Emerson Fisher 4320 Manuel utilisateur
Emerson
Emerson Rosemount Analytical FCLi Manuel utilisateur
Emerson
Emerson FB1100 Manuel de la liste des pièces
Emerson
Emerson FB1200 Guide rapide
Emerson
Emerson E2 Manuel utilisateur
Emerson
Emerson Rosemount 2410 Manuel utilisateur
Emerson
Emerson Rosemount 3051 Series Manuel utilisateur
Emerson
Emerson Rosemount 3410 Series Manuel de programmation
Emerson
Emerson Micro Motion MVD Direct Connect Manuel utilisateur
Emerson
Emerson Rosemount 5400 Series Manuel utilisateur
Emerson
Emerson Micro Motion TA Series Manuel utilisateur
Emerson
Emerson Rosemount 6888A Manuel utilisateur
Emerson
Emerson Rosemount 8742C Manuel utilisateur
Emerson
Emerson Rosemount CT5800 Manuel utilisateur
Emerson
Emerson Rosemount 3814 Manuel de programmation
Emerson
Emerson PACSystems IPC 2010 Manuel utilisateur
Emerson
Emerson Rosemount 8800D Series Manuel utilisateur
Emerson
Emerson Rosemount 753R Manuel utilisateur
Emerson
Emerson Rosemount Analytical 1054B C Manuel utilisateur
Emerson
Emerson Daniel Series Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur