Emerson YARWAY GS-1 Manuel utilisateur

1 2

3 4

YARWAY THERMOCON VALVE TRAP GS-1

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Basic configuration - Body style double flanged, wafer, lug and buttweld

SECTION 2 - KEY POINT OF WHEN YOU

DISASSEMBLY OR ADJUST EXHAUST

TEMPERATURE

Shut the stop valve of Thermocon valve

before you disassemble or adjust exhaust

temperature.

Disassemble or adjust exhaust temperature

after you confirm that surface temperature of

Thermocon valve is cooled down as cool as you

can touch it by your hand.

If you disassemble or adjust exhaust

temperature without enough cooling,

Thermocon valve does not operate good due to

too much expansion of bellows.

Emerson.com/FinalControl

SECTION 1 - METHOD OF TEMPERATURE

CONTROL

The valve has already been pre-set for a

specific temperature. When changing the

exhaust temperature setting, please follow the

directions as enumerated below;

1. Remove the cap (1).

2. With a screwdriver, turn adjustment screw

(2) then loosen locking nut (3).

3. Gently turn adjustment-screw to the left for

a higher temperature.

Each revolution should bring up the

temperature by 20° C.

4. Gently turn adjustment-screw to the

right when lower temperature is desired.

Each revolution should lower the

temperature by 2O °C.

5. Limit of temperature adjustment is between

5O °C - 1OO °C.

6. Locking nut should be tightened properly

and adjustment screw is fixed in place

with a screw-driver when adjustment is

completed.

7. Insert gasket (13), replace the cap (1).

This completes the adjustment procedure.

VCIOM-15470-EN 20/06

SECTION 3 - TROUBLE SHOOTING

1. In case that exhaust temperature is higher

than set temperature.

a. Loose the cap and locking-nut. Turn the

adjustment screw to downward slowly.

b. If exhaust temperature is not down

after you turn the adjustment screw to

downward, please check followings.

- If disc or seat surface has scratch or not.

- If bellows u

nit is broken or not.

2. In case that exhaust temperature is lower

than set temperature.

a. Loose that cap and locking-nut. Turn the

adjustment screw to upward slowly.

b. If exhaust temperature is not up after you

turn the adjustment screw to upward,

please check followings.

- If disc or seat surface has scratch or not.

- If bellows unit is broken or not.

- If much scale is on screen or not.

When you find scratched disc or seat and

broken bellows etc., replace that parts.

And reassemble Thermocon valve. After you

confirm the point that the disc is touched with

seat slightly, open the stop valve on the steam

line. At last, adjust the exhaust temperature

according to method of temperature control.

YARWAY THERMOCON VALVE TRAP GS-1

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

SECTION 4 - MAINTENANCE

Clean up the internal screen periodically.

When you find broken screen, replace it. At the

same time, please clean up disc and seat.

SECTION 5 - CONSTRUCTION AND MATERIAL

PARTS LIST

No. Item Materials

1. Cap nut Mild steel

2. Adjusting screw Stainless steel

3. Lock nut Mild steel

4. Bonnet Mild steel

5. Seal ring Teflon

6. Gasket Copper

7. Body Forged steel

8. Bellows assembly Stainless steel

9. Screen Stainless stee

10. Valve seat Stainless stee

11. Valve Stainless stee

12. Gasket Copper

13. Gasket Copper

14. Spring Stainless steel

15. Washer Copper

FIGURE 1

unit of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed

as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and

conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

Emerson Electric Co. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of

any Emerson Electric Co. product remains solely with the purchaser.

Emerson.com/FinalControl

Autres manuels Emerson Unité de contrôle

Emerson

Emerson FISHER LR128 Series Manuel utilisateur

Emerson

Emerson AVENTICS NL1 Manuel utilisateur

Emerson

Emerson Anderson Greenwood 500 Series Manuel utilisateur

Emerson

Emerson Control Techniques FM-4 Manuel utilisateur

Emerson

Emerson Neotecha Instructions d'installation et d'utilisation

Emerson

Emerson VAREC 3600B Series Manuel d'exploitation et d'entretien

Emerson

Emerson Vanessa 30000 Series Manuel utilisateur

Emerson

Emerson Keystone Manuel utilisateur

Emerson

Emerson fisher 6365 Series Manuel utilisateur

Emerson

Emerson Penberthy 500 Series Manuel

Emerson

Emerson NEOTECHA SNB Series Manuel utilisateur

Emerson

Emerson Liebert iCOM Manuel utilisateur

Emerson

Emerson Fisher 1805P Series Manuel utilisateur

Emerson

Emerson Tartarini V Series Manuel utilisateur

Emerson

Emerson Bettis OM13-SCE300 Manuel utilisateur

Emerson

Emerson CL600 Manuel utilisateur

Emerson

Emerson Alco Controls CVE-014 Manuel utilisateur

Emerson

Emerson 903 Manuel utilisateur

Emerson

Emerson Anderson Greenwood 93 Series Manuel utilisateur

Emerson

Emerson FB1100 Manuel de la liste des pièces

Emerson

Emerson IEC 62591 Manuel utilisateur

Emerson

Emerson Fisher Baumann 26000 Manuel utilisateur

Emerson

Emerson EZMotion Manuel utilisateur

Emerson

Emerson 63EG Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur