Emerson Bettis OM13-SCE300 Manuel utilisateur

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

August 2022

Bettis OM13 - SCE300

3-Wires Module

Notes

August 2022

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

This page intentionally left blank

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

Table of Contents

August 2022

Table of Contents

Section 1: Optional Module 13: 3-Wires Module

1.1 OM13 Module Functionality ....................................................................... 1

1.2 Manufacturer ............................................................................................. 2

Section 2: Installation

2.1 Assembling Procedure for Models 63-125 Nm

Old Version (US or Non-US Market) ............................................................. 4

2.2 Assembling Procedure for Models 250-500-1000-2000 Nm

Old Version (US or Non-US Market) ............................................................. 9

2.3 Assembling Procedure for Models 63-125 Nm

New Version (US or Non-US Market) ........................................................... 14

2.4 Assembling Procedure for Models 250-500-1000-2000 Nm

New Version (US or Non-US Market) ........................................................... 20

Section 3: OM13 Module Setting and Conguration

OM13 Module Setting and Conguraton .............................................................. 25

Section 4: OM13 Kit

OM13 Kit .............................................................................................................. 26

Section 5: OM13 Wiring Diagram

OM13 Wiring Diagram ......................................................................................... 30

Notes

August 2022

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

This page intentionally left blank

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1 August 2022

Optional Module 13: 3-Wires Module

Section 1: Optional Module 13: 3-Wires Module

NOTE:

Before installation, these instructions must be fully read and understood.

Section 1: Optional Module 13:

3-Wires Module

1.1 OM13 Module Functionality

The OM13 3-wires module is supplied as an option to the Bettis SCE300 actuators. It is

possible to receive the actuator already equipped with the OM13, ordering it with the

basic feature. Alternatively, it is possible to order the OM13 as a separate kit and install

it in the basic actuator in the factory or in the field. The OM13 is an optional module

suitable to accomplish the following SCE300 actuator additional functionality:

• 120/240 V AC 1-phase, 50/60 Hz, 3-wire control for open/close operations,

without additional power supply.

NOTE:

For decommissioning instructions, please refer to the relevant section in the SCE300

VCIOM-15516-EN.

NOTE:

The OM13 command has to be provided by two separate switches for open and for close

with a delay of at least one second between the two commands, when reversing the

operation from open to close or vice versa.

!WARNING

SCE300 actuator must be electrically isolated before any disassembling or

reassembling operations. Before any disassembling or reassembling operations,

please follow in detail the relevant section of the Installation, Operation and

Maintenance Manual (latest revision available).

!WARNING

The electronic parts of the SCE300 actuators and all option modules can be damaged

by a discharge of static electricity. Before you start, touch a grounded metal surface to

discharge any static electricity.

August 2022

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

2Optional Module 13: 3-Wires Module

Section 1: Optional Module 13: 3-Wires Module

! WARNING

It is assumed that the installation, conguration, commissioning, maintenance, and repair

works are carried out by qualied personnel and checked by responsible specialists.

! WARNING

Repair work, other than operations outlined in this manual, is strictly reserved to qualied

Emerson personnel or to personnel authorized by the company itself.

1.2 Manufacturer

Manufacturer with respect to Machinery Directive 98/37: as specied on the SCE300 label.

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1 August 2022

Installation

Section 2: Installation

To assemble the OM13 into the SCE300 actuator, proceed as follows:

• Ensure that all the parts received with the OM13 are available as described in

Section 4.

• Using Section 4, select only mechanical parts (screws and spacers) depending on

actuator models.

• Gather the right tools for the assembly and for setting the actuator controls.

• With an Allen wrench of 5 mm, unscrew the cover screws as shown in Figure 1.

• Remove the actuator cover as shown in Figure 2.

Figure 2

Figure 1

Follow one of the following assembling procedures depending on actuator model.

August 2022

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

4Installation

Section 2: Installation

2.1 Assembling Procedure for Models 63-125 Nm

Old Version (US or Non-US Market)

• Verify that you received the correct OM13 3-wire module as shown in Figure 3.

• Remove the following as indicated in Figure 4:

— 3-pins connector cable

— 4-pins connector cable

— 8-pins connector cable

Figure 3

Figure 4

• Remove the 3-wire power connector cable from the power card as indicated in

Figure 5.

• Remove the 3 screws (3 pcs M3x10) from the logic board and screw the 3 metal

spacers as shown in Figure 6.

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1 August 2022

Installation

Section 2: Installation

Figure 5

Figure 6

• Place the OM13 card onto the spacers and tighten the 4 screws as shown in Figure 7.

• Remove the 2-pins connector cable from J1 on the power card as shown in Figure 8.

Figure 7

screws

metal spacers

August 2022

Installation, Operation and Maintenance Manual

VCIOM-17114-EN Rev. 1

6Installation

Section 2: Installation

Figure 8

• Connect the 2-wire power connector cable of the OM13 card to the power card as

shown in Figure 9.

• Connect the 3-wire power connector cable of the terminal board to the OM13

card as shown in Figure 10.

Figure 9

Figure 10

Table des matières

Autres manuels Emerson Unité de contrôle

Emerson

Emerson Cash Valve K-10 Manuel

Emerson

Emerson Keystone 990 Document technique

Emerson

Emerson TESCOM 64-2600 Series Manuel utilisateur

Emerson

Emerson Fisher Vonk CHV Manuel utilisateur

Emerson

Emerson VersaMax CPU001 Manuel utilisateur

Emerson

Emerson Sempell PSRV VS99 Manuel utilisateur

Emerson

Emerson FISHER Enardo 450 Series Manuel utilisateur

Emerson

Emerson Rosemount Ultrasonic 3410 Series Manuel utilisateur

Emerson

Emerson SAPAG 7700 Mode d’emploi

Emerson

Emerson IC200UEM001 Manuel utilisateur

Emerson

Emerson SM-I/O 24V Protected Manuel utilisateur

Emerson

Emerson Micro Motion Manuel utilisateur

Emerson

Emerson KEYSTONE F580 Guide de configuration

Emerson

Emerson PENBERTHY N7 Series Manuel

Emerson

Emerson CV4-7 Series Manuel utilisateur

Emerson

Emerson Fisher Baumann 87000 Manuel utilisateur

Emerson

Emerson COM Express Carrier Mode d’emploi

Emerson

Emerson RSTi-OM Manuel utilisateur

Emerson

Emerson VA001-102-01 Mode d’emploi

Emerson

Emerson OM-230V Series Manuel utilisateur

Emerson

Emerson Fisher POSI-SEAL A31A Manuel utilisateur

Emerson

Emerson FASANI Manuel utilisateur

Emerson

Emerson Fisher Vee-Ball V200U Series Manuel utilisateur

Emerson

Emerson Keystone Figure 320 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur