EMC VNX Series Manuel utilisateur

This guide describes one of five models available in the VNX Series, the EMC®

VNX7500™. This guide is a parts location guide and provides illustrations of the part

number label locations of orderable parts for the EMC VNX7500 platform. Included in this

parts location guide are also tables describing the individual VNX7500 parts or

components and how these components are identified as either customer replaceable

units (CRUs) or field replaceable units (FRUs).

This guide is available online at https://mydocs.emc.com/VNX/relatedDocs.jsp. From the

VNX Hardware Parts heading, click on the desired guide. The guide will appear in your

browser.

Topics include:

◆VNX7500 Block and File platform stackup ................................................................. 4

◆VNX7500 components .............................................................................................. 9

◆Standby power supplies (SPSs)................................................................................. 9

◆Storage processor enclosure (SPE) .......................................................................... 11

◆SP Power supply/cooling fan module ...................................................................... 12

◆SP CPU module ....................................................................................................... 13

◆Management module .............................................................................................. 16

◆Control Station........................................................................................................ 17

◆Data Mover enclosure ............................................................................................. 18

◆Data Mover Power supply/cooling fan module......................................................... 19

◆Data Mover CPU module.......................................................................................... 20

◆Management module .............................................................................................. 23

◆I/O modules............................................................................................................ 23

◆DIMMs .................................................................................................................... 39

◆Disk-array enclosure (DAE) ...................................................................................... 43

EMC®VNX™Family

VNX7500™

Parts Location Guide

P/N 300-013-315

Rev 01

June 27, 2012

2 EMC VNX7500 Parts Location Guide

Product software and hardware release revisions

IMPORTANT

The part numbers listed in this guide are for reference only. Part numbers can change over

time, and this document does not keep pace with those changes. The EMC parts inventory

system will automatically substitute for the latest part numbers as required.

Product software and hardware release revisions

As part of an effort to improve its product lines, EMC periodically releases revisions of its

software and hardware. Therefore, some functions described in this document might not

be supported by all versions of the software or hardware currently in use. The product

release notes provide the most up-to-date information on product features.

Contact your EMC representative if a product does not function properly or does not

function as described in this document.

Note: This document was accurate at publication time. New versions of this document

might be released on the EMC online support website. Check the EMC online support

website to ensure that you are using the latest version of this document.

Revision history

The following table presents the revision history of this document:

Where to get help

EMC support, product, and licensing information can be obtained as follows:

Product information — For documentation, release notes, software updates, or

information about EMC products, licensing, and service, go to the EMC online support

website (registration required) at:

https://Support.EMC.com

Technical support — For technical support, go to EMC online support and select Support.

On the Support page, you will see several options, including one to create a service

request. Note that to open a service request, you must have a valid support agreement.

Contact your EMC sales representative for details about obtaining a valid support

agreement or with questions about your account.

Revision Date Description

A01 June 27, 2012 First release of the

VNX7500 Parts Location

Guide

with a document part number

How this document is organized

EMC VNX7500 Parts Location Guide 3

How this document is organized

The major sections of this guide are listed in the following table.

Related documentation

EMC provides the ability to create step-by-step planning, installation, and maintenance

instructions tailored to your environment. To create VNX customized documentation, go

to: https://mydocs.emc.com/VNX/.

To download a PDF copy of the desired publication, go to the following sections:

◆For hardware-related books, go to the About VNX section, and then select Learn about

VNX. Next, follow the steps in the wizard.

◆For technical specifications, go to the About VNX section, and then select View

technical specifications. Next, follow the steps in the wizard.

◆For installation, adding, or replacing tasks, go to the VNX tasks section, and then

select the appropriate heading. For example, to download a PDF copy of the

VNX7500

Block Installation Guide

, go to Install VNX and follow the steps in the wizard.

◆For server-related tasks, go to the Server tasks for the VNX5300, VNX5500, VNX5700,

and VNX7500 section, and then select the appropriate heading. For example, to

download a PDF copy of Adding or replacing hardware, go to Add or replace hardware

and follow the steps in the wizard.

Title Description

“VNX7500 Block and File

platform stackup” on page 4

Describes and shows the front and rear views of a typical

VNX7500.

“VNX7500 components” on

page 9

Provides a description of the components that comprise a

VNX7500. Along with a description, illustrations of each

component are also shown.

“Standby power supplies

(SPSs)” on page 9

Describes and illustrates the part number label locations of the

SPS.

“Storage processor enclosure

(SPE)” on page 11

Describes and illustrates the part number label locations of an

SPE and the components that comprise the SPE.

“Data Mover enclosure” on

page 18

Describes and illustrates the part number label locations of the

DME and the management module.

“I/O modules” on page 23 Describes and illustrates the part number label locations of the

I/O modules that comprise the SPE and the DME.

“Small form-factor pluggable

(SFP)” on page 36

Describes and illustrates the part number label locations of the

SFP transceiver modules used in the DME.

“DIMMs” on page 39 Describes and illustrates the part number label locations of the

memory module or dual-inline memory modules (DIMMs) used

in the DPE and the DME.

“Disk-array enclosure (DAE)” on

page 43

Describes and illustrates the part number label locations of the

three types of DAEs available for the VNX7500.

4 EMC VNX7500 Parts Location Guide

VNX7500 Block and File platform stackup

The Block and File (Unified) VNX7500 platform comprises a dual 1U or 2U standby power

supply (SPS), storage processor enclosure (SPE), Control Station, and four Data Mover

enclosures (with two Data Movers per enclosure).

Note: Throughout this guide, figure references are placed in the Part number label location

heading of tables because some of the tables have part number locations, as described in

Table 3 on page 12 and some do not, as described in Table 1 on page 10, for example.

This format is used throughout this guide.

Front view

On the front, viewing from top to bottom, a Block and File (Unified) VNX7500 platform

includes the following hardware:

◆One to two 1U Control Stations

◆One to four 2U Data Mover enclosures with the first 2U Data Mover enclosure having

two Data Movers and the remaining three 2U Data Mover enclosures having from two

to six Data Movers for a total of 8 Data Movers.

◆One 2U SPE chassis with two SPs; each SP has two power supply/cooling modules

and one CPU module

◆One dual 1U standby power supply (SPS)

Note: You use a dual 2U SPS when a 4U DAE with Flash drives is used in a Vault drive

configuration. Otherwise, the dual 1U SPS is used with the 2U or 3U DAE as the Vault

drive.

Figure 1 on page 5 shows an example of the front of a Block and File (Unified) VNX7500.

The DAEs are not shown.

VNX7500 Block and File platform stackup

EMC VNX7500 Parts Location Guide 5

Figure 1 Example of the Block and File VNX7500 platform (front view)

Note: The configuration in Figure 1 is primarily used with the 3U or 2U DAEs only. The

configuration in Figure 3 on page 7 is primarily used with a combination of the 4U and 3U

DAEs.

Rear view

On the rear, viewing from top to bottom, a Block and File (Unified) VNX7500 platform

includes the following hardware components (Figure 2 on page 6):

◆Two 1U Control Stations

◆Four 2U Data Mover enclosures with eight Data Movers

SPS

VNX-000622

DVD

Control Station 0

Control Station 1

(optional)

Storage

processor

enclosure

AC AC AC AC

Data Mover

enclosure 0

AC AC AC AC

Data Mover

enclosure 1

(optional)

AC AC AC AC

Data Mover

enclosure 2

(optional)

AC AC AC AC

Data Mover

enclosure 3

(optional)

6 EMC VNX7500 Parts Location Guide

VNX7500 Block and File platform stackup

◆One 2U SPE with one to two storage processors (SP A and B); each SP has one

management module and two I/O modules

◆One dual 1U SPS

Note: Use a dual 2U SPS when a 4U DAE with Flash drives is used in a Vault drive

configuration. Otherwise, the dual 1U SPS is used with the 2U or 3U DAE as the Vault

drive.

Figure 2 shows an example of the rear of a Block and File (Unified) VNX7500 platform

configuration having a dual 1U SPS, a 2U SPE with two storage processors (SP A and B,

each SP includes a management module and two I/O modules), four 2U Data Mover

enclosures (with two Data Movers per enclosure), and two 1U Control Stations. Each Data

Mover includes a management module and two I/O modules.

Figure 2 Example of Block and File (Unified) VNX7500 platform (rear view)

SPS

VNX-000623

Storage

processor

enclosure

0123

MGMT

Control Station 0

Control Station 1

(optional)

0123

Data Mover

enclosure 0

0123

Data Mover

enclosure 1

(optional)

0123

Data Mover

enclosure 2

(optional)

0123

Data Mover

enclosure 3

(optional)

0123

012 3

0123

VNX7500 Block and File platform stackup

EMC VNX7500 Parts Location Guide 7

Front view

Figure 3 shows an example of a Block and File (Unified) VNX7500 platform having a dual

2U SPS1, a 2U SPE, two 2U Data Mover enclosures (with two Data Movers2per enclosure),

and two 1U Control Stations (one optional).

Figure 3 shows only the VNX7500 platform components. The DAEs are not shown.

Figure 3 Example of a Block and File (Unified) VNX7500 platform using a 2U SPS (front view)

1. Use a dual 2U SPS when a 4U DAE with Flash drives is used in a Vault drive configuration.

Otherwise, the dual 1U SPS is used with the 2U or 3U DAE as the Vault drive.

2. The term Data Mover is used throughout this guide. The term Data Mover is also referred to as a

blade. These terms are interchangeable and basically mean the same.

DVD

Control Station 0

Control Station 1

(optional)

Storage

processor

enclosure

AC AC AC AC

Data Mover

enclosure 0

AC AC AC AC

Data Mover

enclosure 1

(optional)

AC AC AC AC

Data Mover

enclosure 2

(optional)

AC AC AC AC

Data Mover

enclosure 3

(optional)

SPS

VNX-000657

8 EMC VNX7500 Parts Location Guide

VNX7500 Block and File platform stackup

Rear view

Figure 4 shows an example of the rear view of the Block and File (Unified) VNX7500

platform configuration having a dual 2U SPS1, a 2U SPE with two storage processors (SP A

and B, each SP includes a management module and two I/O modules), two 2U Data Mover

enclosures (with two Data Movers per enclosure), and two 1U Control Stations. Each Data

Mover includes a management module and two I/O modules.

Figure 4 shows only the VNX7500 platform components. The DAEs are not shown.

Figure 4 Example of a Block and File (Unified VNX7500) platform using a 2U SPS (rear view)

1. Use a dual 2U SPS when a 4U DAE with Flash drives is used in a Vault drive configuration.

Otherwise, the dual 1U SPS is used with the 2U or 3U DAE as the Vault drive.

SPS

VNX-000658

Storage

processor

enclosure

0123

012 3

0123

012 3

MGMT

Control Station 0

Control Station 1

(optional)

0123

Data Mover

enclosure 0

0123

Data Mover

enclosure 1

(optional)

0123

Data Mover

enclosure 2

(optional)

0123

Data Mover

enclosure 3

(optional)

0123

VNX7500 components

EMC VNX7500 Parts Location Guide 9

VNX7500 components

Viewing from the bottom to the top, the Block and File (Unified) VNX7500 platform

includes several components. The following sections discuss each component in an

illustration and table. The illustration will show or point out the location of the part

number label on the component. The table will list the part number, describe the

component or part, and tell you if it is a FRU or CRU or both.

◆1U standby power supply (SPS)

◆2U storage processor enclosure (SPE)

• Storage processor (SP) power supply/cooling module

• Storage processor

◆2U Data Mover enclosure (DME)

• DM power supply/cooling module

• DM CPU module

•Managementmodule

◆1U Control Station (CS)

◆I/O modules

• SP I/O modules

• DM I/O modules

◆Small form-factor pluggable (SFP) transceiver modules

◆Dual in-line memory modules (DIMMs)

•SPDIMMs

• DM DIMMs

◆Disk-array enclosures (DAEs)

• 3U, 15 (3.5-inch) disk drive

• 2U, 25 (2.5-inch) disk drive

• 4U, 60 (2.5- or 3.5-inch) disk drive

Standby power supplies (SPSs)

Two types of SPSs are supported in the VNX7500 platform. The 1U and 2U SPS. Each SPS

is used in a different configuration. The 1U SPS is primarily used in a VNX7500 platform

with a 2U or 3U DAE. The 2U SPS is used in a VNX7500 platform when the 4U DAE is used

as a Vault drive.

10 EMC VNX7500 Parts Location Guide

Standby power supplies (SPSs)

1U SPS

The Block and File (Unified) VNX7500 platform can support up to two 1U standby power

supplies or a dual 1U SPS to provide temporary emergency power to the Block and File

VNX7500 platform. Part numbers for the 1U SPS are only on the rear of the product.

Figure 5 shows the part number location of the 1U SPS.

Figure 5 Example of a dual 1U SPS

Table 1 lists the part number label location, part number, description, and whether it is a

FRU or CRU.

2U SPS

The VNX7500 can support up to two 2U standby power supplies or a dual 2U SPS to

provide temporary emergency power to the VNX7500 platform. Part numbers for the 2U

SPS are only on the rear of the product.

Figure 6 shows the part number location of the 2U SPS.

Figure 6 Example of a dual 2U SPS

900-XXX-0014 0082

A00REV

S/N

900-XXX-0014 0082

A00REV

S/N

Part Number (P/N) label CNS-001545

Table 1 1U SPS part number

Part number label

location (Figure 5) Part number Description FRU CRU

078-000-084

078-000-085

DC standby power supply (SPS)

1200W



SPS B SPS A

VNX-000676Part Number (P/N) label

Autres manuels pour VNX Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EMC Stockage

EMC

EMC EMC Unity Family Manuel utilisateur

EMC

EMC Celerra NS20 Manuel utilisateur

EMC

EMC CelerraNS-120 Manuel utilisateur

EMC

EMC VNX5300 Block Manuel utilisateur

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC Celerra NS40 Instructions d'utilisation

EMC

EMC Connectrix EC-1200 Manuel technique

EMC

EMC AX4-5 Manuel utilisateur

EMC

EMC Data Domain DD990 Instructions de montage

EMC

EMC Celerra NX4 Manuel utilisateur

EMC

EMC DATA DOMAIN DD160 Instructions de montage

EMC

EMC FC4700 Manuel technique

EMC

EMC DATA DOMAIN DD7200 Instructions de montage

EMC

EMC CLARiiON CX4-120 Manuel utilisateur

EMC

EMC Disk Library DL4106 Manuel utilisateur

EMC

EMC DATA DOMAIN DD4200 Instructions de montage

EMC

EMC VNX5500 Manuel utilisateur

EMC

EMC Symmetrix DMX-3 Manuel utilisateur

EMC

EMC D860 Archiver Instructions de montage

EMC

EMC CLARiiON AX150 Series Guide produit

EMC

EMC DLm120 Manuel technique

EMC

EMC Celerra NS20 Instructions d'utilisation

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur