EMC CloudBoost 100 Instructions de montage

Installation and Setup Guide

EMC CloudBoost 100

Version 2.0

System Installation and Setup Guide

P/N 302-002-468

REV. 01

November 2015

lCloudBoost 100 appliance....................................................................................... 2

lRelated documentation...........................................................................................2

lTools and supplies needed...................................................................................... 3

lSafety information.................................................................................................. 4

lDescription of the system.......................................................................................5

lUnpack the system................................................................................................12

lInstall the rack brackets........................................................................................ 12

lInstall the system in the rack.................................................................................16

lInstall the cable management arm (CMA)............................................................. 18

lInstall the bezel..................................................................................................... 19

lConnecting data cables........................................................................................ 20

lPowering on the controller................................................................................... 20

lRequirements for configuring CloudBoost............................................................ 20

lConfiguring network settings for a CloudBoost appliance.....................................22

lCloudBoost appliance cache sizing....................................................................... 26

CloudBoost 100 appliance

The CloudBoost 100 appliance arrives with the operating system and all software

installed and ready to deploy.

After you register the CloudBoost 100 appliance, you can look for system updates in

the EMC Cloud Portal. For information about updating CloudBoost, see any of the

integration guides. These integration guides are available at http://support.emc.com

and also on the Help page within the EMC Cloud Portal.

EMC NetWorker with EMC CloudBoost Integration Guide

EMC Avamar with EMC CloudBoost Integration Guide

Veritas NetBackup with EMC CloudBoost Integration Guide

Related documentation

EMC provides a variety of document types to support our products. End-user

documents include user guides, hardware installation guides, administrator guides,

software guides, part replacement guides, release notes, and others. Integration

documents describe how to integrate EMC systems with third party backup

applications, and compatibility matrices show which components are compatible with

each other.

This document refers to other EMC documents by title. To locate a referenced

document, go to the EMC Online Support website at https://support.emc.com, enter

the document title in the search box, and click the search button.

Note

Hard copies of a document may be out of date. Always check for the current version

of a document before you start an upgrade or begin a significant configuration change.

Viewing documents on the EMC Online Support site

Follow these steps to view EMC documents at the online portal.

To view documentation, go to the EMC Online Support site at https://

support.emc.com and click Support by Product below the Search box. Type a

product name in the Find a Product box, wait for those words to appear in the list of

matches below the box, and click the words. Then click ». In the list of categories

under the Search box, click Documentation.

lThe Product choices let you filter results by system model name or number or by

an associated software release.

lThe Content Type choices let you filter results by category. Click More under

Content Type to see all of the categories. The categories that contain end-user

and compatibility documentation are these:

nManuals and Guides, for the software and hardware manuals for your system

and for integration guides that explain how to use your systems with backup

software and other products.

nRelease Notes, for specific versions of EMC operating system in use with your

system.

Installation and Setup Guide

2EMC CloudBoost 100 2.0 Installation and Setup Guide

nCompatibility Documents, for guides that show which EMC and third-party

components are compatible.

Where to go for more information

Table 1 Additional resources

For information about: Go to https://support.emc.com/

How to configure and administer CloudBoost The integration guide appropriate for your

software release and integrated system.

EMC NetWorker with EMC CloudBoost

Integration Guide

EMC Avamar with EMC CloudBoost

Integration Guide

Veritas NetBackup with EMC CloudBoost

Integration Guide

How to use third-party applications Integration documentation and compatibility

matrices

New features, enhancements, known issues,

and late-breaking news about your

CloudBoost software release

EMC CloudBoost Release Notes

for your

software release

Tools and supplies needed

These tools and supplies may be helpful for the installation and setup tasks for a

CloudBoost 100 system.

lNull modem cable (DB-9 female to female), plus spare

lUSB-to-DB-9 serial (male connector) converter cable if the laptop does not have a

serial port, plus spare

lPower adapter, C13 to NEMA 5-15 (if based in North America), or a power cord

for your laptop power adapter with a C13 plug, so that you can power your laptop

from a rack PDU

lAntistatic wrist strap and conductive foam pad

lScrewdrivers:

nPhillips #2 with a 12 inch or longer blade

nPhillips #2 (standard-length blade)

nPhillips #1

nFlat head 3/16 inch

nFlat head 1/4 inch

nTorx T10

lFlashlight

lNeedle nose pliers

lDiagonal wire cutters (for cutting tie wraps)

System Installation and Setup Guide

Where to go for more information 3

l2 GB USB flash memory drive

lTie wraps (4 inch and 8 inch)

l(recommended) Roll of 5/8 inch Velcro cable tie material (3M Scotchmate

SJ-3401 or similar)

Safety information

CAUTION

lIf the system is used in a manner not specified by the manufacturer, the

protection provided by the equipment may be impaired.

lThe RJ-45 sockets on the motherboard, PCI cards, or I/O modules are for

Ethernet connection only and must not be connected to a

telecommunications network.

Review this list of important safety recommendations.

lAll plug-in modules and blank plates are part of the fire enclosure and must be

removed only when a replacement can be added immediately. The system must

not be run without all parts in place.

lA controller must be operated only from a power supply input voltage range of

100–240 VAC, 50–60 Hz.

lEach component is intended to operate with all working power supplies installed.

lProvide a suitable power source with electrical overload protection.

lA safe electrical earth connection must be provided to each power cord. Check

the grounding of the power sources before applying power.

lThe plug on each power supply cord is used as the main disconnect device. Ensure

that the socket outlets are located near the equipment and are easily accessible.

lPermanently unplug the unit if you think it is damaged in any way and before

moving it. If the unit is powered by multiple sources, disconnect all supplied power

for complete isolation.

lThe power connections must always be disconnected prior to removal or

replacement of a power supply module from any of the components in the system.

lA faulty or failed fan module should be replaced as soon as possible. A faulty or

failed power supply module must be replaced within 24 hours.

lEMC systems are heavy. Use two people or a mechanical lift to move any system.

lTo comply with applicable safety, emission, and thermal requirements, covers

must not be removed and all bays must be fitted with plug-in modules.

lLoad the rack beginning at the bottom to prevent the rack from becoming top-

heavy.

lFor ESD protection, EMC recommends that you wear a suitable antistatic wrist or

ankle strap. Observe all conventional ESD precautions when handling plug-in

modules and components.

lDo not extend components on slide rails until you have loaded at least three or

more similarly weighted items in the rack, or unless the rack is bolted to the floor

or overhead structure to prevent tipping.

Installation and Setup Guide

4EMC CloudBoost 100 2.0 Installation and Setup Guide

Description of the system

This section includes site requirements, product specifications, and descriptions of

front and rear panels.

Site requirements

The site requirements are:

lThe system requires 2U of vertical space in a standard 19”, four-post rack. Do not

use a two-post rack.

lUse air conditioning that can cope with the maximum BTU/hour thermal rating.

lTemperature control required with a gradient (change) not to exceed 30° C in an

hour.

lIn a closed or multi-unit rack, ensure that the unit has adequate airflow through

the front bezel and back panel and that ambient temperature requirements are

met.

lEnsure that the front bezel and back panel clearances are met.

lEnsure that cables at rear of unit do not obstruct exhaust airflow.

lIf installing in a closed cabinet, ensure that the front and rear doors have at least

65% open area to ensure adequate airflow for cooling.

lFront bezel requires 1.56 inches (4.0 cm) of unobstructed clearance.

lBack panel requires 5 inches (12.7 cm) of unobstructed clearance.

lAC power outlets must be provided with an earth ground conductor (safety

ground). A safe electrical earth connection must be provided to each power cord.

lRequired voltage: 100-120 V~ or 200-240 V~. Frequency: 50 to 60 Hz.

System specifications

Table 2 Fundamental features

Model Watts BTU

hour

Power (VA)

(120V/230V)

Size

(U)

Power

connectors

Weight Width Depth Height

CloudBoost

100 with 12

drives

487 1662 502 (4.18A/

2.18A)

2 2 x grounded,

120 VAC, NEMA

15P/R

73 lb. /

33.1 kg.

19 in. /

48.3 cm.

29.5 in. /

74.9 cm.

3.5 in. /

8.9 cm.

lOperating temperature: 50° to 95° F (10° to 35° C), derate 1.1° C per 1000 feet,

above 7500 feet up to 10,000 feet.

lOperating humidity: 20% to 80%, non-condensing.

lNon-operating temperature: -40° to +149° F (-40° to +65° C).

lOperating acoustic noise: Sound power, LWAd, is 7.52 bels. Sound pressure,

LpAm, is 56.4 dB. (Declared noise emission per ISO 9296.)

Storage capacity

The table lists the capacities of the CloudBoost 100 system. EMC system internal

indexes and other product components use variable amounts of storage, depending on

System Installation and Setup Guide

Description of the system 5

the type of data and the sizes of files. If you send different data sets to otherwise

identical systems, one system may, over time, have room for more or less actual

backup data than another.

Note

EMC system commands compute and display amounts of disk space or data as

decimal multiples of certain powers of two (210, 220, 230, and so forth). For example, 7

GiB of disk space = 7 x 230 bytes = 7 x 1,073,741,824 bytes. EMC refers to this process

as Base 2 calculation.

Table 3 CloudBoost 100 storage capacity

System/

Installed

Memory

Internal

Disks

Raw

Storage

(Base

10)

Data Storage

Space

(Base 2

Calculation)

Data

Storage

Space

(Base 10

Calculation)

External Storage

CloudBoost

100

8 x 8 GB

DIMM

Seven or

twelve 3.5

in. 3 TB

SAS HDDs

21 TB or

36 TB

7 drives: 10671

GiB

7+5 drives:

18763 GiB

12 drives: 24334

GiB

7 drives: 11458

GiB

7+5 drives:

20147 GiB

12 drives:

26129 GiB

Up to a maximum of

4 x 30-TB SAS

shelves or 3 x 45-TB

SAS shelves; up to

135 TB of raw

capacity.

Note

For information about EMC expansion shelves, see the separate document,

EMC

CloudBoost Disk Array Expansion Shelf Installation Guide

Front panel

Figure 1 Front panel components

Front LED indicators

The front of the system contains 12 disk drive status LEDs that are normally blue and

blink when there is activity on the disk. The LEDs are shaped like triangles, and the

apex of the triangle points either left or right toward the disk whose status it

represents. If the disk drive has a failure, the disk’s status LED turns from blue to

amber.

There are two square-shaped system LEDs. A blue system power LED is on whenever

the system has power. An amber system fault LED is normally off and is lit amber

whenever the chassis or any other FRU in the system requires service.

Installation and Setup Guide

6EMC CloudBoost 100 2.0 Installation and Setup Guide

Figure 2 Disk and system LEDs

1. System fault LED (square shaped).

2. System power LED (square shaped).

3. Disk drive LEDs (triangular shaped).

Table 4 Indicator states

Part State

System fault Normally unlit. Amber indicates fault.

System power Steady blue indicates normal power.

Disk drive status Steady blue or blinking blue indicates normal operation. Amber

indicates fault or failure.

When the bezel is affixed, the blue system power LED can be seen through the bezel.

Disk drives

The system contains up to 12 hot-swappable 3.5" HDD SAS disk drives, located in the

front of the chassis. Left to right, drives are numbered 0-3 in the top row, 4-7 in the

middle row, and 8-11 in the bottom row.

lThe base configuration contains 7 disk drives in locations 0 through 6. Drive bays

7-11 contain bay blanks.

lThe expanded configuration contains 12 disk drives.

Back panel

Figure 3 Features on rear of chassis

System Installation and Setup Guide

Back panel 7

1. Slot 0.

2. Slot 1.

3. Slot 2.

4. Slot 3.

5. Slot 4, NVRAM-BBU combination module.

6. Onboard interfaces.

7. Power supply, number 0.

8. Power supply, number 1.

Port layout

Figure 4 Port numbers on back panel

1. Physical 4, logical ethMe (10GBaseT)

2. Physical 2, do not use

3. Physical 0, do not use

4. Service network port

5. Physical 5, do not use

6. Physical 3, do not use

7. Physical 1, do not use

8. USB port

9. Serial port (DB-9, RS-232)

Power supply units

A system has two power supply units, numbered 0 and 1 from left to right. Each power

unit has LEDs (shown in the photo) that indicates the following states:

lAC LED (top): Glows green when AC input is good.

lDC LED (middle): Glows green when DC output is good.

lSymbol “!” (lower): Glows solid amber for fault or attention.

Installation and Setup Guide

8EMC CloudBoost 100 2.0 Installation and Setup Guide

Figure 5 Power supply unit LEDs

Onboard interfaces and LEDs

Figure 6 Onboard interfaces and LEDs

1. Serial number label.

2. SP power LED (top); SP service LED (bottom).

3. Dual-port 10GBaseT.

4. Quad-port Gigabit Ethernet.

5. Service network port (top); USB port (bottom).

6. Serial port.

The onboard interfaces and LEDs are located at the far lower left side of the back of

the system. The onboard interfaces enable you to check system status and connect to

the system through a serial console or Ethernet connections. The dual-port 10GBaseT

and quad-port Gigabit Ethernet interfaces allow connectivity to the data host.

A USB port enables the system to boot from a USB flash device.

Rear LED status summary

Table 5 Indicator status

Part State

SP service Blue indicates normal operation. Amber indicates fault.

SP power Steady green indicates normal power. Dark indicates no power.

System Installation and Setup Guide

Onboard interfaces and LEDs 9

Table 5 Indicator status (continued)

Part State

I/O module Steady green indicates normal operation. Amber indicates fault

or failure.

Power supply AC Glows green when AC input is operational.

Power supply DC Glows green when DC output is operational.

Power supply symbol “!” Glows solid amber for fault or attention.

I/O modules and slot assignments

Table 6 CloudBoost 100 slot assignments

Slot Number CloudBoost 100 System

0 Empty

1 Empty

2 Empty

3 SAS or empty

4 NVRAM-BBU

When a system is upgraded, the newly inserted I/O module must go into slot position

three. No other slot positions should be used. Existing modules should not be removed

and reinserted into different slots.

Internal system components

The photo shows the system with the storage processor (SP) module removed from

the chassis. The top of the photo shows the rear of the system.

Installation and Setup Guide

10 EMC CloudBoost 100 2.0 Installation and Setup Guide

Table des matières

Autres manuels EMC Stockage

EMC

EMC DATA DOMAIN DD4200 Instructions de montage

EMC

EMC VNX Series Manuel utilisateur

EMC

EMC Iomega StorCenter ix2-dl Manuel utilisateur

EMC

EMC VNXe3200 Manuel utilisateur

EMC

EMC Disk Library DL4106 Manuel utilisateur

EMC

EMC Celerra NS40 Instructions d'utilisation

EMC

EMC CX500I - Insignia CLARiiON NAS Server Manuel utilisateur

EMC

EMC VMAX 100K Manuel utilisateur

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC Celerra Manuel utilisateur

EMC

EMC DATA DOMAIN DD4500 Instructions de montage

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC Data Domain DD860 Instructions de montage

EMC

EMC DATA DOMAIN DD620 Instructions de montage

EMC

EMC FC4700 Manuel technique

EMC

EMC Atmos Instructions d'installation

EMC

EMC VNX5300 Block Manuel du propriétaire

EMC

EMC VPLEX Instructions de montage

EMC

EMC CLARiiON CX4-120 Manuel utilisateur

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC Connectrix EC-1200 Manuel technique

EMC

EMC EMC2 DATA DOMAIN DD660 Instructions de montage

EMC

EMC Celerra NS20 Instructions d'utilisation

EMC

EMC VNX Series Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur