12mm coin cell powering supported (CR1216 battery not included) for RTC and LED on
ALARM signal
Dimensions
Compact size: 134 x 114 mm
2.2 ESD Precaution
Please note that the LPC4088 Experiment Base Board and LPC4088 QuickStart
Board come without any case/box and all components are exposed for finger
touches –and therefore extra attention must be paid to ESD (electrostatic
discharge) precaution.
Make it a habit always to first touch the metal surface of one of the USB or
Ethernet connectors for a few seconds with both hands before touching
any other parts of the boards. That way, you will have the same potential as
the board and therefore minimize the risk for ESD.
In general touch as little as possible on the boards in order to minimize the risk of ESD damage.
Note that Embedded Artists does not replace boards that have been damaged by ESD.
2.3 General Handling Care
Handle the LPC4088 Experiment Base Board and LPC4088 QuickStart Board with care. The boards
are not mounted in a protective case/box and are not designed for rough physical handling.
Connectors can wear out after excessive use. The LPC4088 Experiment Base Board is designed for
prototyping use, and not for integration into an end-product. The LPC4088 QuickStart Board is
however designed for integration into end-products.
For boards with the LCD expansion kit mounted, do not exercise excessive pressure on the LCD glass
area. That will damage the display. Also, do not apply pressure on the flex cables connecting the
LCD/touch screen. These are relatively sensitive and can be damaged if too much pressure is applied
to them.
Note that Embedded Artists does not replace boards where the LCD has been improperly
handled.
2.4 Code Read Protection
The LPC4088 has a Code Read Protection function (specifically CRP3, see datasheet for details) that,
if enabled, will make the LPC4088 impossible to reprogram (unless the user program has implemented
such functionality).
Note that Embedded Artists does not replace LPC4088 QuickStart Boards where the LPC4088
has CRP3 enabled. It’s the user’s responsibility to not invoke this mode by accident.
2.5 CE Assessment
The LPC4088 Experiment Bundle (consisting of the LPC4088 Experiment Base Board and LPC4088
QuickStart Board) is CE marked. See separate CE Declaration of Conformity document.
The LPC4088 Experiment Bundle is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
EMC emission test has been performed on the LPC4088 Experiment Bundle. Standard interfaces like
Ethernet, USB, serial have been in use. General expansion connectors where internal signals are
made available (for example processor pins) have been left unconnected. Connecting other devices to
the product via the general expansion connectors may alter EMC emission. It is the user’s
