EMAC CPC-2420 Manuel utilisateur
To learn more about EMAC’s products and services and how they can help your project
http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf
Authorized Distributor, Integrator, and Value-Added Reseller
Manual downloaded from ftp.emacinc.com
For purchase information please contact info@emacinc.com
For technical support please submit a ticket at www.emacinc.com/support
CPC-2420
2.5” Carrier Board for Mini Biscuit PC
User’s Manual
Copyright notice
This document is copyrighted, 2000, by Advantech Co., Ltd. All
rights are reserved. The original manufacturer reserves the right to
make improvements to the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from
such use.
Acknowledgements
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
C&T is a trademark of Chips and Technologies, Inc.
All other product names or trademarks are properties of their respec-
tive owners.
Part No. 2006242000
1st Edition Printed in Taiwan January 2000
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products that have been repaired
or altered by persons other than repair personnel authorized by
Advantech, or which have been subject to misuse, abuse, accident or
improper installation. Advantech assumes no liability under the terms
of this warranty as a consequence of such events.
Because of Advantech high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you
will be billed according to the cost of replacement materials, service
time and freight. Please consult your dealer for more details. If you
think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any on-
screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Packing list
Before installing your board, make sure that the following materials
have been received:
• 1 CPC-2420 carrier board for CPC-2245 mini biscuit PC
• 1 warranty certificate
• This user's manual
• 1 40-pin FPC cable (part no. 1701400301)
• 1 50-pin FPC cable (part no. 1701500700)
• Y cable (part no. 1700060201)
• HDD cable (part no. 1701440500)
• FDD cable (part no. 1701340600)
• LPT cable (part no. 1703340300)
• COM cable (part no. 1700100250)
• Phoenix power connector (part no. 1652002101)
• Power cable (part no. 1703050050)
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
Technical support and sales assistance
If you have any technical questions about the CPC-2420 or any other
Advantech products, please visit our support website at:
http://www.advantech.com/support
For more information about Advantech's products and sales informa-
tion, please visit:
http://www.advantech.com
Contents
Chapter 1 Hardware Configuration .............................. 1
1.1 Introduction........................................................................2
1.2 Specifications ......................................................................2
1.3 Safety precautions ..............................................................3
1.4 Jumper settings ..................................................................4
1.4.1 LCD 3.3/5 V select (J6) ..............................................4
1.4.2 Reset (J3) ....................................................................4
1.5 Board layout: dimensions..................................................5
1.6 Installing a Mini Biscuit PC ..............................................7
Chapter 2 Connecting Peripherals .............................. 9
2.1 Board layout: connector locations..................................10
2.2 Floppy drive/parallel port connector (CN2)..................12
2.4 VGA display connector (CN3) ........................................12
2.5 Ethernet configuration (CN4) .........................................13
2.6 Enhanced IDE connector (CN5) .....................................13
2.7 Power connector (CN6/CN15).........................................13
2.8 Keyboard and PS/2 mouse connector (CN7) .................14
2.9 24-bit LCD display connector (CN8)..............................14
2.10 LCD inverter connector (CN9) .......................................14
2.11 Serial ports
(CN10: COM1/RS-232; CN12: COM2/RS-232)............14
2.11.1 RS-232 connection (COM1: CN10) .......................14
2.11.2 RS-232 connection (COM2: CN12) .......................15
2.12 36-bit LCD display connector (CN11)............................15
2.13 ISA connector (J1/J2) ......................................................15
Appendix A Pin Assignments .................................... 17
A.1 Floppy drive/parallel port connector (CN2)..................18
A.2 CRT display connector (CN3).........................................20
A.3 IDE hard drive connector (CN5) ....................................21
A.4 Power connector (CN6) ...................................................22
A.5 Keyboard and mouse connector (CN7)..........................22
A.6 24-bit LCD display connector (CN8)..............................23
A.7 LCD power inverter (CN9) .............................................24
A.8 COM1 RS-232 serial port (CN10) ..................................24
A.9 36-bit LCD display connector (CN11)............................25
A.10 COM2 RS-232 serial port (CN12) ..................................26
A.11 Phoenix power connector (CN15) ...................................26
A.12 ISA-bus FPC connector (J1/J2) ......................................27
A.13 Board layout: locations of Pin 1 of J1 and J2 ................29
A.14 FPC cable layout (J1/J2; 50-pin FPC connector)..........31
Tables
Table 1-1: LCD 3.3/5 V VDD select (J6).......................................................... 4
Table 2-1: Connectors ...................................................................................11
Table 2-2: CPC-2420 serial port default settings...........................................15
Table A-1: Parallel port connector (CN2) ......................................................18
Table A-2: Floppy drive connector (CN2) ......................................................19
Table A-3: CRT display connector (CN3) ......................................................20
Table A-4: IDE hard drive connector (CN5)................................................... 21
Table A-5: Power connector (CN6)................................................................22
Table A-6: Keyboard and mouse connector (CN7) .......................................22
Table A-7: 24-bit LCD display connector (CN8) ............................................23
Table A-8: LCD power inverter (CN9)............................................................ 24
Table A-9: COM1 RS-232 serial port (CN10) ................................................24
Table A-10: 36-bit LCD display connector (CN11) ........................................25
Table A-11: COM2 RS-232 serial port (CN12) ..............................................26
Table A-12: Phoenix power connector (CN15)..............................................26
Table A-13: ISA- bus FPC connector (J1) .....................................................27
Table A-14: ISA-bus FPC connector (J2) ......................................................28
Figures
Figure 1-1: Board layout: dimensions (component side) .................................5
Figure 1-2: Board layout: dimensions (solder side) .........................................6
Figure 1-3: Installation of FPC cable ............................................................... 8
Figure 2-1: Board layout: connector locations (component side) ..................10
Figure 2-2: Board layout: connector locations (solder side) ..........................10
Figure A-1: Board layout: location of Pin 1 of J2 (component side) ..............29
Figure A-2: Board layout: location of Pin 1 of J1 (solder side) ......................30
Figure A-3: FPC cable layout......................................................................... 31
Hardware
Configuration
This chapter gives background informa-
tion on the CPC-2420. It shows you how
to configure the board to match your
application and prepare it for installation
into your PC.
Sections include:
•Introduction
•Specifications
•Safety precautions
•Jumper settings
•Board layout: dimensions
1
CHAPTER
2CPC-2420 User's Manual
1.1 Introduction
The CPC-2420 is a carrier board designed with a SODIMM socket for
connection to a Mini Biscuit PC. It also has connectors for functions
such as VGA, LCD, LAN, FDD, IDE, ISA and a printer port. The
CPC-2420 can help users design their own board easier.
1.2 Specifications
•Two FPC connectors for ISA-bus expansion
•DB-15 VGA connector
•RJ-45 Ethernet connector
•DB-9 COM1 serial port connector
•10-pin COM2 serial port box header
•LCD connector
•One FDD/LPT connector
•44-pin HDD connector
•6-pin PS/2 KB/mouse connector
•Size: 120 x 82 mm
•Weight: 80 g
Table des matières
Autres manuels EMAC Conseil des transporteurs
Manuels Conseil des transporteurs populaires d'autres marques
CTJ
CTJ TX2 Manuel utilisateur
Amfeltec
Amfeltec AngelShark Series Manuel utilisateur
Advantech
Advantech CPC-2420 Manuel d'installation et d'exploitation
Bob's Space Racers
Bob's Space Racers BSR-3000 Manuel utilisateur
RTimes
RTimes Z509 Manuel utilisateur
mikroElektronika
mikroElektronika Clicker 2 Manuel utilisateur
