ELTEC IPIN-300 Manuel utilisateur

elektronik mainz

IPIN-300

Serial IPIN Module

Hardware Manual

Revision 3 A

The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility

is assumed for inaccuracies. ELTEC reserves the right to make changes to any products to improve reliability, function or

design. ELTEC does not assume any liability arising out of the application or use of any product or circuit described in this

manual; neither does it convey any license under its patent rights nor the rights of others. ELTEC products are not authorized

for use as components in life support devices or systems intended for surgical implant into the body or intended to support or

sustain life. Buyer agrees to notify ELTEC of any such intended end use whereupon ELTEC shall detemine availability and

suitability of its product or products for the use intended.

This document contains copyrighted information. All rights including those of translation, reprint, broadcasting,

photomechanical or similar reproduction and storage or processing in computer systems, in whole or in part, are reserved.

EUROCOM is a trademark of ELTEC Elektronik AG. Other brands and their products are trademarks of their respective

holders and should be noted as such.

This document is edited and printed by:

Rev. Changes Date

Revision History IPIN-300

Editorial Team:

ELTEC Elektronik AG

Galileo-Galilei-Str. 11 Postfach 42 13 63

D-55129 Mainz D-55071 Mainz

Telephone +49(61 31) 9 18-0

Telefax +49(61 31) 9 18-1 99

0 A Preliminary 13.07.87, H.R.

1 A First Edition 26.08.87, H.R.

2 A Second Edition with IPIN-302/3 15.05.90, H.R.

3 A Third Edition,

improved device reliability,

valid for Hardware Revision 3.A 08.07.92, H.R.

H.K., U.I., J.G.

Table of Contents

Page

IPIN-300 Table of Contents

Hardware Manual III

1General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2LEB Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Installation of the Serial IPINs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2 Connecting to the I/O Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.1 The Configuration Array of IPIN-300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.2 The Configuration Array of IPIN-302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.3 The Configuration Array of IPIN-303. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5Address Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7Serial I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.1 Baud Rate Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.2 I/O Connectors of IPIN-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7.3 I/O Connector of IPIN-302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

7.4 I/O Connectors of IPIN-303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

8Differences between IPIN-300 and IPIN-302/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Technical Action Request Form Sheet

Reader Comments Form Sheet

Page

Table of Contents IPIN-300

IV Hardware Manual

Tables:

Table1: I/O Functions of IPIN-300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Table2: Jumpers J401 to J406: TD/RD - Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table3: Address Range of IPIN-300/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Table4: SCC Time Constants for x16 Clock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Table5: I/O Connectors (X2, X3, X4) of IPIN-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Table6: Connection of IPIN-300 to Various Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Table7: Pin Assignment of 9-pin Sub-D Connectors (IPIN-300). . . . . . . . . . . . . . . . . . . . . . . . . . 20

Table8: Connection of 9-pin to 25-pin Sub-D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Table9: I/O Connector of IPIN-302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Table10: Pin Assignment of 6-pin Modular Jacks (IPIN-303). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Table11: Differences between IPIN-300 and IPIN-302/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Figures:

Figure1: Block Diagram IPIN-300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Figure2: Block Diagram IPIN-302/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Figure3: Jumper Location Diagram (Bottom View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure4: Jumper Location of IPIN-302 (Bottom View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Scope of Delivery

Description: Order No.:

IPIN-300 Scope of Delivery

Hardware Manual V

NOTE: The last letter of the order numbers refers to the hardware revision and is subject to

changes. Please contact ELTEC for information about valid order numbers.

IPIN-A300 V-IPIN-A300

Serial IPIN with 3 x cable (0.3m) 18-pin DIL to 2x9-pin Sub-D

and front panel

IPIN-A302 V-IPIN-A302

Opto-isolated serial IPIN

IPIN-A303 V-IPIN-A303

I/O for 2 x IPIN-A302

with 2x26-pin connection cable to IPIN-A302 (0.25m)

Options

Description: Order No.:

Options IPIN-300

VI Hardware Manual

NOTE: The last letter of the order numbers refers to the hardware revision and is subject to

changes. Please contact ELTEC for information about valid order numbers.

Related Products

Description: Order No.:

3 x Cable (1.5 m) 18-pin DIL to 2x9-pin Sub-D V-IPIN-Z300

and Front Panel

Documentation:

Hardware Manual IPIN-300 V-IPIN-C993

Hardware:

Connection Cable 9-pin to 25-pin Sub-D, 2 m V-CABL-A119

RxD TxD =

Connection Cable 9-pin Sub-D , 2 m V-CABL-A120

RxD TxD X

Connection Cable 6-pin to 25-pin Sub-D , 3 m V-CABL-A143

Connection Cable 6-pin to 9-pin Sub-D , 3 m V-CABL-A144

RS232 to RS422/485 Converter V-CONV-A100

Data Sheets:

Data sheet Zilog SCC Z8530 V-DTBT-A906

Warning !

This equipment generates and can radiate radio frequencies. If not installed in accordance

with the instruction manual, it may cause interference to radio communications. The

equipment has not been tested for compliance with the limits for class A computing devices,

pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable

protection against such interference, but temporary usage is permitted as per regulations.

Operation of this equipment in a residential area is likely to cause interference, in which case

the user, at his own expense will be required to take whatever measures may be required to

shield the interference.

Unpacking Instructions

Carefully remove the board from the shipping carton.

Save the original shipping container and packing material for storing or reshipping the board.

Avoid touching integrated circuits except in an electrostatic free environment.

Electrostatic discharge can damage these circuits.

Inspect the board for any shipping damage. If undamaged, the module can be prepared for

system installation.

CAUTION

IPIN-300 Unpacking and Warning

Hardware Manual VII

Conventions

If not otherwise specified, addresses are written in hexadecimal notation and identified by a

leading dollar sign ("$").

Signal names preceded by a slash ("/"), indicate that this signal is either active low or that this

signal becomes active with the trailing edge.

Used abbreviations:

bbit

Bbyte

Kkilo, means the factor 400 in hex (1024decimal)

Mmega, the multiplication with 100 000 in hex (1 048576 decimal)

MHz 1 000 000 Hertz

Conventions IPIN-300

VIII Hardware Manual

IPIN-300 1 General Description

Hardware Manual 1

1 General Description

The IPIN-300 and IPIN-302 are single Intelligent Peripheral INterface (IPIN) modules for use

in connection with an ELTEC Local Extension Bus (LEB) base module.

The most important features of these IPINs are:

•Three Zilog Z8530 8MHz serial communications controllers (SCCs) for six high-speed,

multi-mode, multi-protocol channels with program control.

•In asynchronous mode, each channel is programmable for five to eight bits per word with

one, one and one-half, or two stop bits. The user can also select odd, even, or no parity.

•Programmable baud rate generators and digital phase-locked loops for clock recovery for

50bps up to 115 200bps in asynchronous x16 mode.

•In synchronous mode, you can select external or internal character synchronization on one

or two characters, CRC generation and checking with CRC-16 or CRC-CCITT, present to

either 1s or 0s.

•Each SCC has also an SDLC/HDLC mode with comprehensive frame-level control,

automatic zero insertion and deletion, I-field residue handling, abort generation and

detection, CRC generation and checking and SDLC loop mode operation.

•Multi-protocol operation under program control; programmable for NRZ, NRZI, or FM data

encoding.

•Vectored interrupt support with three different vectors per channel for transmit, receive, and

status interrupt sources.

•Software driver for OS-9 and UNIX, for other operating systems sample drivers available.

•In connection with an IBAM board, the user has up to 18 multi-mode high-speed serial I/O

channels in a single VME slot.

Special features of the IPIN-300:

•0 to 2Mbps in synchronous mode.

•RS232 / V 24 (X.21 bis) full modem control with a 9-pin IBM compatible Sub-D connector.

•RS422,485 / V 11 (X.21) converter available.

•500mV pico fuse to protect 12V supplied chips.

Special features of the IPIN-302:

•On-board level converter for RS232 or RS422.

•Opto-isolated channel, 500VDC isolation voltage against system, not between channels.

•Only RxD and TxD supported.

•Front panel with 12 x 6-pin modular jack for two IPIN-302s available (IPIN-A303).

1 General Description IPIN-300

2Hardware Manual

Figure1: Block Diagram IPIN-300

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ELTEC Unité de contrôle

ELTEC

ELTEC IPIN-22 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur