10
direct connection or remote assistance.
The user can use the following menu:
– Use arrow keys ↑ or ↓ to go to INSTALLER AUTH. option.
– Press OK to enter the menu.
– Press OK repeatedly to change authorisation type:
• TEMPORARY = access granted once, within 15 minutes
from activation
• NONE = access denied
• PERMANENT = access granted
– Press STOP to save and exit the menu.
2.5.3 Manual control of outputs
Users can change outputs status if such outputs have been
assigned Manual Control option.
– Use arrow keys ↑ or ↓ to go to OUTPUT CONTROL
option.
– Press OK to enter the menu.
– Use arrow keys ↑ or ↓ to browse among outputs or enter
the output number directly (example, key in 003 for out-
put 3) .
– Press OK repeatedly to change output status (ENABLE/
DISABLE).
When all outputs are disabled the message No Out.
Available will be displayed. When an output is associ-
ated to an event and/ or cannot be controlled by the
user, its status can be checked but it cannot be
managed.
– Press STOP to save and exit the menu.
2.5.4 SIM balance check
Users can enable/disable balance reading of GSM module
SIM card.
This option is available only if the correct SIM Balance
Check Profile has been selected by the installer.
– Use arrow keys ↑ or ↓ to go to MANAGE SIM BAL. option.
– Press OK to enter the menu.
– Press OK repeatedly to change between READING ENA-
BLED e READING DISABLED.
– Press STOP to save and exit the menu.
Not all telephone companies allow such operation.
2.5.5 Date and time setup
– Use arrow keys ↑ or ↓ to go to CLOCK SETUP option.
– Press OK to enter the menu.
– Use number keys to set weekdays (1= Monday ... 7=
Sunday), day/month/year, hour and minute. Use arrow
keys ↑ or ↓ to move cursor along the row: data which are
being modified will blink.
– Press OK to save and exit the menu, or press STOP to exit
the menu without saving.
2.5.6 Clock calibration
Use this menu to manually adjust the dierence in time oc-
curred over a month between the control unit clock and the
standard one.
– Use arrow keys ↑ or ↓ to go to CLOCK CALIBR. option.
– Press OK to enter the menu.
– Use arrow keys ↑ or ↓ to increase/decrease seconds per
month (5s/month steps).
– Press OK to save and exit the menu, or press STOP to exit
the menu without saving.
2.5.7 Schedules change
The activation time of a schedule set with the programmer
can be suspended or modified.
There has to be at least one schedule set and users
has to be authorised for changes.
– Use arrow keys ↑ or ↓ to go to WEEKLY PROGRAMMER
option.
– Press OK to enter the menu.
If there are no schedules available the message No
Prog. Avail. will be displayed.
– Press 1 to start modifying time: use number keys to mod-
ify time, arrow keys ↑ or ↓ to move cursor. Press OK to
confirm.
– Press # to suspend a schedules, press 1 to restart it.
– Press STOP to save and exit the menu.
2.5.8 Users authorisations management
The user who has been authorised during system installa-
tion can change other users’ authorisation to system access.
– Use arrow keys ↑ or ↓ to go to MANAGE USERS option.
– Press OK to enter the menu.
– Use arrow keys ↑ or ↓ to select user to manage.
– Press OK repeatedly to change the user’s authorizations:
• TOTAL
• ARM ONLY (= only arming)
• DISARM ONLY (= only disarming)
• DENIED (= system access denied)
– Press # key to suspend a user. The suspension can be set
through weekly programmer too. However, setup from
keypad has priority over other settings.
– Press STOP to save and exit the menu.
2.5.9 Change phone numbers
Numbers on phone numbers list can be modified.
– Use arrow keys ↑ or ↓ to go to PHONE NUMBERS option.
– Press OK to enter the menu.
– Use arrow keys ↑ or ↓ to select the number to be modified.
– Press OK to activate the field.
– Use number keys, * and # to key in the number: cursor
will move rightwards. Press ↓ to cancel one digit. Press
