Micro USB PORT: Used for updating the firmware with a computer via a mi-
cro-USB cable and for connecting to the “Ekho Configuration” software.
ANTENNA TERMINAL BLOCKS: Can be used to replace the built-in anten-
nas with a third party external antenna. In order to do that, please remove the
existing antennas and insert coaxial cables from the external 868 MHz anten-
nas (connect the central conductor to socket "A").
NOTE: The use of External antenna’s is at the installers/users risk.
TAMPER: When the cover is opened, a "Fault" event is generated, this can
be disabled/enabled via the Ekho Configuration software or the translator
menu.
"ESCAPE/[1]" BUTTON: Used to exit from a menu or a sub-menu if the user
doesn’t want to apply the changes. A second function of this button is to be
used as a digit "1" for the pass code .
"ENTER/[2]" BUTTON: Used to select a menu or a sub-menu; confirming the
changes made to any parameters. A second function of this button is to be
used as a digit "2" for the pass code.
"UP/[3]"BUTTON: Used for navigating through menus or sub-menus; chang-
ing the parameters (as a value increase). A second function of this button is
to be used as a digit "3" for the pass code.
"DOWN/[4]" BUTTON: Used for navigating through menus or sub-menus;
changing the parameters (as a value decrease). A second function of this but-
ton is to be used as a digit "4" for the pass code.
ISOLATOR indicator: Green LED on: loop is normal and isolator is closed,
yellow LED on: short-circuit on the loop and the isolator is open.
RF indicator: Operates only if the translator is in expander mode. The green
LED indicates that the RF connection with the central node (other translators)
is present, the yellow LED indicates that RF connection with central node is
lost.
