Edwards CTM City Tie Module Instructions de montage

CTM City Tie Module Installation Sheet

1234

Description

The CTM City Tie Module provides a single municipal box

connection for activating a local energy type master box

connected to a public fire alarm reporting system.

Installation

Install the CTM in accordance with NFPA 70 National Electrical

Code.

WARNING: This device will not operate without electrical

power. As fires frequently cause power interruptions, we

suggest you discuss further safeguards with your fire

protection specialist.

The CTM is shipped from the factory as an assembled unit; it

contains no user-serviceable parts and should not be

disassembled.

For more information, refer to the technical reference manual

listed inside the control panel door.

To install the module:

1. Verify that all field wiring is free of opens, shorts, and

ground faults.

2. Make all wiring connections as shown in the wiring

diagram. See Figure 1.

4. Using the 4-24 × 1/2 in (13 mm) self-tapping screw

provided, mount the wall plate to the module.

5. Using the two 6-32 × 1/2 in (13 mm) machine screws

provided, mount the module to the electrical box.

Wiring

Wire the CTM to a dedicated notification appliance circuit

(NAC) as in Figure 1 on page 2. Do not install other notification

appliances on the same circuit.

Specifications

Voltage 24 VDC nom.

Current

Standby

Alarm

20 mA

300 mA, max.

Ground fault impedance 0 

Wire size 12 to 18 AWG (0.75 to 2.5 sq mm)

Mounting North American 2-1/2 in (64 mm) deep

1-gang box

Municipal box connection

Wire resistance:

Trip current:

26 

200 mA into a 14.5 coil

Operating environment

Temperature

Relative humidity

32 to 120°F (0 to 49°C)

0 to 93% noncondensing

firealarmresources.com

2 / 2 P/N 3101025 • REV 02 • REB 25JAN13

Figure 1: CTM installation wiring diagram

1234

–

Act iveNormal

Public fire alarm

reporting system

Local energy type

master box

–

–+

–

EOLR [ 3 ]

Act iveNormal

From dedicated notif ication

appliance circuit [4]

Compatible electrical box

CTM

Wall plate

Sc r ew s

14.5 

trip coil

[1]

[2]

[1] Power-limited and supervised for opens, shorts, and ground faults

[2] Nonpower-limited and supervised for opens and ground faults

only. 26 , max. 4.4 A, max.

[3] Use end-of-line resistor value required by the notification

appliance circuit

[4] NAC output signal must be compatible with the input rating of the

local energy type master box.

firealarmresources.com

Autres manuels Edwards Unité de contrôle

Edwards

Edwards CTM Instructions de montage

Edwards

Edwards PV16EKA Manuel utilisateur

Edwards

Edwards Speedivalve SP5 Manuel utilisateur

Edwards

Edwards A528-44-404 Manuel utilisateur

Edwards

Edwards SCU-801 Manuel utilisateur

Edwards

Edwards PV10/16EK Manuel utilisateur

Edwards

Edwards IBV16MKS Manuel utilisateur

Edwards

Edwards SIGA-IM2 Instructions de montage

Edwards

Edwards 3-ASU Instructions de montage

Edwards

Edwards SCU-750 Manuel utilisateur

Edwards

Edwards PVEK Series Manuel utilisateur

Edwards

Edwards IPVA10EK Manuel utilisateur

Edwards

Edwards IPVA10EK Manuel utilisateur

Edwards

Edwards HemoSphere ClearSight HEMCSM10 Manuel utilisateur

Edwards

Edwards QSB63 Manuel utilisateur

Edwards

Edwards QSB63 Manuel utilisateur

Edwards

Edwards GXS Manuel utilisateur

Edwards

Edwards GSA-CC1 Instructions de montage

Edwards

Edwards D-397-54-000 Manuel utilisateur

Edwards

Edwards TIC Manuel utilisateur

Edwards

Edwards SCU-350 Series Manuel utilisateur

Edwards

Edwards TCU 40/80 Manuel utilisateur

Edwards

Edwards D397-52-000 Manuel utilisateur

Edwards

Edwards LCPVEK Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur