Edimax ES-5500P Manuel utilisateur

1Physical Description

(1) Panel

Power LED

1000/100/10Mbps LED

Link/Activity LED

RJ45 Connectors

Power Connector

5-Port

Power LED

Link/Activity LED

8-Port

1000/100/10Mbps LED

RJ45 Connectors

Power Connector

Figure 1-1 Panel description

(2) LED

Table 1-1 LED description

Power is supplied

No power

LED Color Status Description

PWR

(Power) Green Lit

Off

A valid link is established

No link is established

Data packets received

Green

LNK/ACT

(Link/Activity) Green

Lit

Off

This port runs at 10Mbps

This port runs at 100Mbps

Flash

5/8 Port Gigabit Switch

SPEED

(10/100/1000M) Yellow This port runs at 1000Mbps

2Installation

1. Operating Environment

This switching hub must be installed and operated within the limits of

specified operating temperature (32-1310F) and humidity (10-95%

Noncondensing). Do not place objects on top of the unit. Do not obstruct any

vents at the sides of the unit. Do not position the unit near any heating source

such as heater, radiator, or direct exposure to sun. Prevent entering of water

and moisture into the unit. If necessary, use dehumidifier to reduce humidity.

2. Connecting to network devices

The RJ-45 ports on the switch support Auto-MDI/MDI-X function which

allows using straight-through or cross-over type cables to connect this switch

to workstation or hub.

Connect one end of the network cable to the RJ-45 port on the rear panel, and

connect the other end of the network cable to the RJ-45 port on the network

device. Follow the same procedure to connect all the RJ-45 ports of the

switch. The UTP network cables must comply with EIA/TIA 568

specifications and Category 5 standard for 1000Mbps data transmission.

Maximum length, using UTP cable, between the switch and connected device

is 100 meters (300ft). Once the network cable is connected to both ends and

the attached network device is powered on, the green LNK/ACT LED should

be lit.

3. Connecting the power

Connect the output end of the power

adapter to the power connector on the

rear panel of the unit. Connect the

power adapter to the power outlet.

The green Power LED on the front

panel should be lit. Figure 2-1 Connect the power adapter

External Power Adapter

3Trouble-shooting

1. Power LED is not lit

zCheck if the power cord is properly connected to the external power

adapter and the power outlet. Make sure the power jack is firmly

plugged into the power socket of the switch.

2. Link/Activity is not lit when connect to 1000/100Mbps device

zCheck the power switch of the network device attached to the switch;

make sure it is turned ON.

zCheck the network cable; make sure it is properly connected to the

switch and the network device.

zCheck the network cable; make sure the UTP cables comply with

EIA/TIA 568 and Category 5 specification.

[!] Contact your dealer if problem persist.

Autres manuels pour ES-5500P

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edimax Changer

Edimax

Edimax ES-1008PL Manuel utilisateur

Edimax

Edimax ES-5240G+ Manuel utilisateur

Edimax

Edimax ES-3305P V2 Guide de référence

Edimax

Edimax ES-3208P Manuel utilisateur

Edimax

Edimax ES-5500G Manuel utilisateur

Edimax

Edimax EK-PSK2 Manuel utilisateur

Edimax

Edimax EK-2U2C Manuel utilisateur

Edimax

Edimax ES-5808PHG Manuel utilisateur

Edimax

Edimax EU-PC2C Manuel utilisateur

Edimax

Edimax ES-5160G V2 Manuel utilisateur

Edimax

Edimax EK-PSK4 Manuel utilisateur

Edimax

Edimax ES-3116RL Manuel utilisateur

Edimax

Edimax EK-2U2C Manuel utilisateur

Edimax

Edimax ES-5500G V3 Guide de référence

Edimax

Edimax ES-5226RM Manuel utilisateur

Edimax

Edimax EU-HB4M Manuel utilisateur

Edimax

Edimax RAS108 Manuel utilisateur

Edimax

Edimax HP-5101ES Manuel utilisateur

Edimax

Edimax GS-1005E Manuel utilisateur

Edimax

Edimax EK-UA2C Manuel utilisateur

Edimax

Edimax EK-PS2C Manuel utilisateur

Edimax

Edimax GS-5208PLG V2 Manuel utilisateur

Edimax

Edimax SP-2101W Manuel utilisateur

Edimax

Edimax EK-2U2CA Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur