Edelbrock 7788 Manuel utilisateur

Catalog #7788

Rev. 12/07 - AJ/mc

Brochure #63-7788

LS1 VALLEY COVER PLATE

For Carbureted GM LS1 Engines ONLY

Catalog #7788

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified

mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer.

Improper installation may result in poor performance and engine or vehicle damage.

DESCRIPTION: This aluminum Valley Cover Plate is designed to cover the lifter valley of General Motors LS1/LS6 engines

when Edelbrock Performer RPM, Victor, or Super Victor carbureted intake manifolds are used. Since the Edelbrock Valley

Cover plate does not include provisions for the factory knock sensor, it is not recommended for use on EFI engines.

A raised boss has been provided if the LS6 PCV system will be used, but the hole will need to be drilled.

KIT CONTENTS:

❑1 Valley Cover Plate

INSTALLATION PROCEDURE

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628 • E-Mail: [email protected]

1. Be sure that the mating surfaces of the block and the surface of the cylinder heads that will meet the valley

cover are thoroughly clean and free of any oils or debris before installation. Use alcohol or lacquer thinner

on a lint-free rag to clean.

2. We recommend using GM Performance Parts gasket #12558178 between the block and cover plate, along

with an appropriate sealant, such as Edelbrock Gasgacinch (#9300).

4. Position the valley cover in place on the engine and install the stock bolts.

5. Tighten bolts to 10-12 ft./lbs., starting in the center and working your way to the ends.

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 8126 Manuel utilisateur

Edelbrock

Edelbrock Honda XR250R Manuel du propriétaire

Edelbrock

Edelbrock 66162 Manuel utilisateur

Edelbrock

Edelbrock 5726 Manuel utilisateur

Edelbrock

Edelbrock VICTOR 8841 Manuel d'instructions

Edelbrock

Edelbrock 66002 Manuel utilisateur

Edelbrock

Edelbrock 5672 Manuel utilisateur

Edelbrock

Edelbrock Quiet-Flo 1790 Manuel utilisateur

Edelbrock

Edelbrock Performer-Plus 2152 Manuel utilisateur

Edelbrock

Edelbrock 61949 Manuel utilisateur

Edelbrock

Edelbrock 65102 Manuel utilisateur

Edelbrock

Edelbrock Chevrolet 5783 Manuel utilisateur

Edelbrock

Edelbrock 5737 Manuel utilisateur

Edelbrock

Edelbrock 5721 Manuel utilisateur

Edelbrock

Edelbrock 17932 Manuel utilisateur

Edelbrock

Edelbrock 8123 Manuel utilisateur

Edelbrock

Edelbrock 16211-MBN-640 Manuel du propriétaire

Edelbrock

Edelbrock 5291 Manuel utilisateur

Edelbrock

Edelbrock 4462 Manuel

Edelbrock

Edelbrock 25-9213 Manuel utilisateur

Edelbrock

Edelbrock 5588 Manuel utilisateur

Edelbrock

Edelbrock 17930 Manuel utilisateur

Edelbrock

Edelbrock 3530 Manuel utilisateur

Edelbrock

Edelbrock Axle-Back Exhaust Systems 5773 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur