Edelbrock 6719 Manuel utilisateur

Pro-Flo Header “Race Only” B-Pipe

For JG/Edelbrock Acura/Honda

Catalog PNs 6809/6719

Please study these instructions carefully before installing your new Pro-Flo Header

Race Pipe. They provide general guidelines to be studied and understood before you remove

your stock system. Failure to follow these instructions may void your warranty. If you have any

questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from

7 am –5 pm, Monday through Friday, Pacific Standard Time.

DESCRIPTION: Edelbrock Pro-Flo header components are designed to improve the exhaust

efficiency of the Acura 1.5L-1.8L engine. A performance gain can be expected with the installation

of the system. This system requires no welding for installation. This race pipe is designed to work

in conjunction with JG Edelbrock Pro-Flo header.

Suggested tools needed for installation: This vehicle has some metric fasteners.

•3/8” ratchet socket set with extensions and a good assortment of metric sockets

•Combination wrenches (metric)

•Universal 12mm and 14mm swivel sockets

•Jackstands, screwdrivers, pliers

•Liquid penetrant (GM #1052627 or equivalent); anti-seize compound (GM #5613695 or

equivalent)

DISASSEMBLY:

1. Raise vehicle and support with jackstand.

2. The use of penetrating oil when removing and the use of anti-seize compound when

installing nuts and bolts will prevent the possibility of broken or stripped nuts and bolts.

3. Make sure converter is cool.

4. Remove O2 sensor (if applicable) being careful not to destroy or rupture the unit.

Warning: Do not clean this unit in any cleaning solvents and do not rupture

wire.

5. Remove the catalytic converter and the secondary assembly (B section) of your Pro Flo

header.

SPECIAL NOTICE: This Edelbrock part is for racing only. This part has not been issued a

California Air Resources E.O. number; therefore, is not legal for use on pollution-controlled

vehicles on California highways.

WARNING: The use of “Thermal Wrap” or any aftermarket coating process will void the

warranty on your Pro-Flo Header Race Pipe. Those products can cause excessive heat and

moisture build up resulting in corrosion and early failure of the system.

©2001 Edelbrock Corporation Rev. 4/01

PARTS LIST

ASSEMBLY

1. Using supplied crush rings and bolts removed from your header connector flange, install

race pipe to connector flange of “A” section.

Note: We have provided threaded fitting in the race pipe assembly for monitoring and

tuning purposes as used with data acquisition systems (Edelbrock QwikData).

2. Always use anti-seize compound on threads of any sensors being installed into the

treaded fitting of race pipe.

Qty. PN Description

125-9184 Race (B-Pipe)

122-6809 Installation Kit

Edelbrock Corporation

2700 California Street

Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 6564 Manuel utilisateur

Edelbrock

Edelbrock 5274 5274 Manuel utilisateur

Edelbrock

Edelbrock 5658 Manuel utilisateur

Edelbrock

Edelbrock Victor Jr. 70057 Manuel utilisateur

Edelbrock

Edelbrock 66062 Manuel utilisateur

Edelbrock

Edelbrock 66162 Manuel utilisateur

Edelbrock

Edelbrock 70206 Manuel utilisateur

Edelbrock

Edelbrock 5644 (Aluminized) Manuel utilisateur

Edelbrock

Edelbrock 66642 Manuel utilisateur

Edelbrock

Edelbrock 15018 Manuel utilisateur

Edelbrock

Edelbrock 1799 Manuel utilisateur

Edelbrock

Edelbrock 5735 Manuel utilisateur

Edelbrock

Edelbrock 41000 Series Manuel utilisateur

Edelbrock

Edelbrock 66042 Manuel utilisateur

Edelbrock

Edelbrock 66022 Manuel utilisateur

Edelbrock

Edelbrock 5769 Manuel utilisateur

Edelbrock

Edelbrock 6607 Manuel utilisateur

Edelbrock

Edelbrock 29565 Manuel utilisateur

Edelbrock

Edelbrock Performer 1403 Manuel utilisateur

Edelbrock

Edelbrock 97383 Manuel utilisateur

Edelbrock

Edelbrock 5224 Manuel utilisateur

Edelbrock

Edelbrock 72961 Manuel utilisateur

Edelbrock

Edelbrock 70401 Manuel utilisateur

Edelbrock

Edelbrock Russell R09430 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur