ECS L4S5A3 Manuel utilisateur

Preface

This publication, including all photographs, illustrations and software, is protected un-

of the material contained herein, may be reproduced without written consent of the au-

thor.

Version 1.1a

Disclaimer

The information in this document is subject to change without notice. The manufac-

turer makes no representations or warranties with respect to the contents hereof and

specifically disclaim any implied warranties of merchantability or fitness for any

particular purpose. The manufacturer reserves the right to revise this publication and

to make changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of Intel

Corporation.

Other product names used in this manual are the properties of their respective owners

and are acknowledged.

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

− Reorient or relocate the receiving antenna.

− Increase the separation between the equipment and the receiver.

− Connect the equipment onto an outlet on a circuit different from that to which

the receiver is connected.

− Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and a shielded AC power cable must be employed with

this equipment to ensure compliance with the pertinent RF emission limits governing

this device. Changes or modifications not expressly approved by the system's manu-

facturer could void the user's authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject to the follow-

ing conditions:

− This device may not cause harmful interference, and

− This device must accept any interference received, including interference

that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian Interference-

causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement

sur le matériel brouilieur du Canada.

About the Manual

The manual consists of the following:

Chapter 1

Introducing the Mainboard

Describes features of the mainboard,

and provides a shipping checklist.

Go to ⇒page 1

Chapter 2

Installing the Mainboard

Describes installation of mainboard

components.

Go to ⇒page 7

Chapter 3

Using BIOS

Provides information on using the BIOS

Setup Utility.

Go to ⇒page 26

Chapter 4

Using the Mainboard Software

Describes the mainboard software.

Go to ⇒page 47

Preface i

CHAPTER 1 1

Introducing the Mainboard 1

Introduction.................................................................................................1

Checklist.....................................................................................................1

Standard Items................................................................................................. 1

Features .....................................................................................................2

Choosing a Computer Case .......................................................................4

Mainboard Components .............................................................................5

CHAPTER 2 7

Installing the Mainboard 7

Safety Precautions......................................................................................7

Quick Guide................................................................................................7

Installing the Mainboard in a Case..............................................................8

Checking Jumper Settings..........................................................................8

Setting Jumpers ............................................................................................... 8

Checking Jumper Settings............................................................................... 9

Jumper Settings ............................................................................................... 9

Connecting Case Components.................................................................10

Front Panel Connector................................................................................... 12

Installing Hardware...................................................................................13

Installing the Processor.................................................................................. 13

Installing Memory Modules .......................................................................... 16

Installing a Hard Disk Drive/CD-ROM......................................................... 17

Installing a Floppy Diskette Drive................................................................. 19

Installing Add-on Cards................................................................................. 19

Connecting Optional Devices........................................................................ 21

Connecting I/O Devices............................................................................24

External Connector Color Coding ................................................................. 25

CHAPTER 3 26

Using BIOS 26

About the Setup Utility..............................................................................26

The Standard Configuration .......................................................................... 26

Entering the Setup Utility.............................................................................. 27

Updating the BIOS........................................................................................ 27

Using BIOS...............................................................................................28

Standard CMOS Features.............................................................................. 29

Advanced BIOS Features .............................................................................. 31

iii

Advanced Chipset Features........................................................................... 33

Integrated Peripherals.................................................................................... 35

Power Management Setup............................................................................. 39

PNP/PCI Configurations................................................................................ 43

PC Health Status............................................................................................ 44

Frequency/Voltage Control............................................................................ 44

Load Fail-Safe Defaults Option..................................................................... 45

Load Optimized Defaults Option................................................................... 45

Set Supervisor/User Password....................................................................... 46

Save & Exit Setup Option ............................................................................. 46

Exit Without Saving ...................................................................................... 46

CHAPTER 4 47

Using the Mainboard Software 47

About the Software CD-ROM ...................................................................47

Auto-installing under Windows 98/ME/2000/XP .......................................47

Running Setup............................................................................................... 48

Manual Installation....................................................................................50

Utility Software Reference ........................................................................50

Introducing the Mainboard

Thank you for choosing the L4S5A3 mainboard. This ATX mainboard comes

with the high performance SiS645DX Northbridge and SiS962/SiS962L

Southbridge chipsets. It accommodates Intel Pentium 4 processors, which

supports a frontside bus (FSB) speeds up to 400/533 MHz.

The SiS645DX Northbridge features the AGTL & AGTL+ compliant bus driver

technology with integrated on-die termination to support Intel Pentium 4 series

processors with FSB 100/133 MHz. It can offer bandwidth up to 2.7 GB/s un-

der DDR333 and 1 GB/s under PC133 in order to sustain the bandwidth

demand from host processor, as well as the multi I/O masters and AGP mas-

ters.

The SiS962/SiS962L Southbridge integrates one Universal Serial Bus 2.0

Host Controllers, the 1394a controller (except for SiS962L), audio controller with

AC 97 interface, Ethernet MAC controller with standard MII interface, three

Universal Serial Bus 1.1 Host Controllers and the IDE Master/Slave control-

lers.

The mainboard has an advanced full set of I/O ports, such as dual channel

IDE interfaces, a floppy controller, a high-speed serial port, a VGA port, an

EPP/ECP capable bi-directional parallel port connector, four USB (Universal

Serial Bus) connector, a PS/2 keyboard, mouse and 1394a connectors (except

for SiS962L). One AGP slot, three PCI local bus slots and one communication

and networking riser (CNR) slot provide expandability for add-on peripheral

cards.

Featuring good stability and performance, and the advanced SiS chipset, the

L4S5A3 is an excellent Pentium 4 DDR mainboard for the budget-conscious

consumer. It is the ideal solution for any home or workstation PC.

Compare the mainboard’s package contents with the following checklist:

Standard Items

• One mainboard

• One diskette drive ribbon cable

• One IDE drive ribbon cable

• One auto-install software support CD

• One I/O panel

• One cooling fan retention module

• This user’s manual

Processor The mainboard uses a micro PGA 478-pin socket that has the

following features:

• Supports 400/533 MHz frontside bus (FSB)

• Supports “Hyper-Threading” technology CPU

• Accommodates Pentium 4 processors at 1.5G/1.6G/1.7G…

2.5G and above

“Hyper-Threading” technology enables the operating system

into thinking it’s hooked up to two processors, allowing two

threads to be run in parallel, both on separate ‘logical’ proces-

sors within the same physical processor.

Chipset The SiS645DX Northbridge and SiS962/SiS962L Southbridge

chipsets are based on an innovative and scalable architecture

with proven reliability and performance.

• Support Intel Pentium 4 series CPU with data transfer

rate of 400MHz and Over Clocking up to 533MHz

• Support 12 outstanding transactions

• Supports DDR333/266/200 SDRAM or PC133/100

SDRAM

• AGP v2.0 Compliant

• Supports Graphic Window Size from 4MBytes to

256Mbytes

• Perform 533MB/s bandwidth in 66MHz x 4 mode

• Serves Isochronous downstream transfer responsive to

the memory read requests originated from USB or au-

dio/modem controllers

• PCI 2.2 specification compliance

• Supports PIO mode 0,1,2,3,4 and Multiword DMA mode

0,1,2

• Supports Ultra DMA 33/66/100/133

• Three independent OHCI USB 1.1 host controllers and

one EHCI USB 2.0 host controller, support up to six ports

• Compliant with IEEE 1394-1995 and 1394a-2000

• System wake-up events include: Power button, keyboard

password/hot key, RTC alarm, Modem ring-in, LAN, AC

97 wake-up, USB wake up and 1394 wake up

Additional key features of the mainboard include support for

six USB ports, an AC’ 97 link for audio and modem, hardware

monitoring, and ACPI/OnNow power management.

Note: The SiS962L Southbridge chipset does not sup-

port the IEEE1394A function.

Memory The mainboard supports DDR 266/333 SDRAM. It accommo-

dates two unbuffered 2.5V 184-pin slots. Each slot supports up

to 1 GB with a total maximum capacity of 2 GB.

USB The USB 2.0 Controller is compliant with Universal Serial Bus

Specification Revision 2.0.

The USB 2.0 supports data transfer rates up to 480MB/sec for

high-speed devices and specifies a microframe that will be

1/8th of a 1msec frame. This allows the USB 2.0 devices to

have small buffers even at high data rates.

The USB 1.1 connectors and other full s

eed cables can su

port the higher speed of USB 2.0 without any changes.

The chipset has the following advanced USB features:

• Compliant with Enhanced Host Controller Interface

(EHCI) Specification Revision 0.95 and Universal Host

Controller Interface (UHCI) Specification Revision 1.1

• PCI multi-function device consists of two UHCI Host Control-

lers for full/low-speed signaling and one EHCI Host

Controller core for high-speed signaling

• Supports PCI-Bus Power Management Interface Specifi-

cation release 1.1

• Legacy support for all downstream facing ports

AGP The mainboard includes a AGP slot that provides four times

the bandwidth of the original AGP specification. AGP technol-

ogy provides a direct connection between the graphics sub-

system and the processor so that the graphics do not have to

compete for processor time with other devices on the PCI bus.

Audio • Compliant with AC'97 Codec

• 4 stereo analog inputs with 5-bits volume controls for

each channel

• Input mixer for 4 stereo, MIC and DAC inputs

• Advanced Power Management

• 48-pins LQFP

10/100 LAN

(optional)

The VT6103 is a Physical Layer device for Ethernet 10BASE-T

and 100BASE-TX using category 5 Unshielded, Type 1

Shielded, and Fiber Optic cables.

• Dual Speed – 100/10 Mbps

• Half And Full Duplex

• Meet All Applicable IEEE 802.3, 10Base-T and 100Base-

Tx Standards

• Adaptive Equalizer

Expansion

Options The mainboard comes with the following expansion options:

• Five 32-bit PCI slots

• One 4xAGP slot

• A Communications and Network Riser (CNR) slot (AC97

interface only)

• Two IDE channels and a floppy disk drive interface

The mainboard supports Ultra DMA bus mastering with trans-

fer rates of 33/66/100/133 MB/sec.

IEEE 1394A Con-

troller Interface

(optional)

• Fully support provisions of IEEE1394-1995 for High Per-

formance Serial Bus and the P1394a draft 2.0 standard

• Provides one compliant cable port at 100Mbits/s,

200Mbits/s, and 400Mbits/s

• Supports arbitrated short bus reset to improve utilization

of the bus

• Data interface to link-layer controller provided through

2/4/8 parallel lines at 50Mbits/s

• Support power-down feature to conserve energy in bat-

tery powered applications

Integrated I/O The mainboard has a full set of I/O ports and connectors:

• Two PS/2 ports for mouse and keyboard

• One serial port

• One parallel port

• Four USB ports

• One LAN port

• Audio jacks for microphone, line-in and line-out

BIOS

Firmware This mainboard uses Award BIOS that enables users to con-

figure many system features including the following:

• Power management

• Wake-up alarms

• CPU parameters

• CPU and memory timing

The firmware can also be used to set parameters for different

processor clock speeds.

Some hardware specifications and software items are subject to change

without prior notice.

There are many types of computer cases on the market. The mainboard com-

plies with the specifications for the ATX system case. Some features on the

mainboard are implemented by cabling connectors on the mainboard to indi-

cators and switches on the system case. Ensure that your case supports all

the features required. The mainboard can support one or two floppy diskette

drives and four enhanced IDE drives. Ensure that your case has sufficient

power and space for all the drives that you intend to install.

Most cases have a choice of I/O templates in the rear panel. Make sure that

the I/O template in the case matches the I/O ports installed on the rear edge

of the mainboard.

This mainboard has an ATX form factor of 305 x 220 mm. Choose a case that

accommodates this form factor.

Table of Mainboard Components

Label Component

AGP1 Accelerated Graphics Port

ATX1 Power connector

ATX2 Standard 20-pin ATX Power connector

AUDIO1 Front audio connector

BAT1 Three volt realtime clock battery

CASFAN1 Case fan connector 1

CDIN1 Primary CD-in connector

CDIN2 Secondary CD-in connector

CNR1 Communications Networking Riser slot

COM2* Onboard serial port header COM2

CPU SOCKET Micro PGA 478-pin socket for Pentium 4 CPUs

CPUFAN1 Cooling fan for CPU

DIMM1 ~ DIMM2 Two 184-pin DDR SDRAM

FDD1 Floppy disk drive connector

IDE 1 Primary IDE channel

IDE 2 Secondary IDE channel

IR1* Infrared cable header

JP1 Clear CMOS jumper

JP2 BIOS protection jumper

PANEL1 Connector for case front panel switches and LED indicators

PCI1 ~ PCI5 Five 32-bit add-on card slots

PWRFAN1* Case fan connector 2

SPDIF1* SPDIF out header

SPEAKER1 Speaker connector

USB2 Front panel USB headers

*Optional component

This concludes Chapter 1. The next chapter explains how to install the main-

board.

Table des matières

Autres manuels ECS Carte mère

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur