ECI MOVFR Manuel utilisateur

ECI

MOVFR –LCD

Door Board

Installation Manual

REV: 2.2

DATE: 5/14/2018

MANUAL NUMBER: 37

Electronic Controls Inc

7073 North Atlantic Ave

Cape Canaveral, FL 32920

WWW.ECIAMERICA.COM

800-633-9788

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 2

REV

DATE

DESCRIPTION

1.0

10/25/2017

INITIAL RELEASE

1.2

11/2/2017

Added installation Kits, AUTO Operation

2.0

4/13/2017

Added new logo

2.1

5/4/2018

Removed CL/HCL Max Speed , Added Light curtain parameter

2.2

5/14/2018

Added drill template directions

 
ECI MOVFR-LCD Installation Manual 
 
 Electronic Controls, Inc. 
North Atlantic Ave. Cape Canaveral, FL 32920 
 800-633-9788 
 www.eciamerica.com P a g e | 3
Table of Contents 
1Warning and Disclaimer .......................................................................................................................5 
2Introduction...........................................................................................................................................6 
3Conventions Used.................................................................................................................................6 
4Safety Information................................................................................................................................7 
5System Overview..................................................................................................................................8 
1 Control Board................................................................................................................................8 
1.1 Electrical...............................................................................................................................8 
1.2 Connections...........................................................................................................................8 
1.2.1 Input Signals .....................................................................................................................8 
1.2.2 Output Relay Contacts......................................................................................................8 
1.2.3 Interfacing with Light Curtain ..........................................................................................9 
1.2.3.1 Formula Systems ®.....................................................................................................9 
1.2.3.2 Tri-Tronics (Leading Edge)® .....................................................................................9 
1.3 User Interface......................................................................................................................10 
1.3.1 LCD Screen Main Menu.................................................................................................10 
1.3.2 Control Board LEDs .......................................................................................................10 
1.3.3 Keypad............................................................................................................................11 
1.3.4 Switches..........................................................................................................................11 
1.4 CAM Optical Sensors .........................................................................................................12 
1.5 Operation.............................................................................................................................12 
1.5.1 Edit Parameters...............................................................................................................12 
1.5.1.1 Standard Parameter settings with defaults ................................................................12 
1.5.1.2 Heavy Door Parameter settings with defaults...........................................................14 
1.5.1.3 Input Voltage setting Parameter................................................................................15 
1.5.1.4 Light Curtain Reopen enable ....................................................................................15 
1.5.2 Load Defaults..................................................................................................................15 
1.5.3 Diagnostics 1...................................................................................................................15 
1.5.4 Diagnostics 2...................................................................................................................15 
2 Variable Frequency Drive Board (VFD Board)..........................................................................16 
2.1 Frequency Board Electrical.................................................................................................16 
2.2 Frequency Board Connections............................................................................................16 

 
ECI MOVFR-LCD Installation Manual 
 
 Electronic Controls, Inc. 
 7073 North Atlantic Ave. Cape Canaveral, FL 32920 
 800-633-9788 
 www.eciamerica.com P a g e | 4
5.2.3 Frequency Board LEDs.......................................................................................................16 
6Installation...........................................................................................................................................17 
6.1 Replacing MOVFR-0001N.........................................................................................................17 
6.2 Replacing MOVFR-0069N.........................................................................................................20 
7Initial Power Up and Test ...................................................................................................................22 
7.1 Manual Operation .......................................................................................................................22 
8Adjustments ........................................................................................................................................23 
8.1 Speed Profiles .............................................................................................................................24 
8.1.1 Closing Speed Profile..........................................................................................................24 
8.1.2 Closing CAM/Sensor Sequence..........................................................................................24 
8.1.3 Open Speed Profile .............................................................................................................24 
8.1.4 Open CAM/Sensor Sequence..............................................................................................25 
8.2 CAM Settings..............................................................................................................................25 
8.2.1 Right Hand CAMs ..............................................................................................................25 
8.2.2 Left Hand CAMs.................................................................................................................26 
9AUTO Operation ................................................................................................................................26 
10 Drill template for MOVFR-0001N replacement.............................................................................27 
 
 

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 5

1Warning and Disclaimer

Thank you for purchasing equipment from ECI America, INC. We want your new equipment to operate

safely. Anyone who installs or uses this equipment should read this publication (and any other relevant

publications) before installing or operating the equipment.

To minimize the risk of potential safety problems, you should follow all applicable local and national

codes that regulate the installation and operation of your equipment. These codes vary from area to area

and usually change with time. It is your responsibility to determine which codes should be followed, and

to verify that the equipment, installation and operation is in compliance with the latest revision of these

codes.

At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical

Code, ASMEA17.1 Safety code for Elevators and Escalators and the codes of the National Electrical

Manufacturer’s Association (NEMA). There may be local regulatory or government offices that can also

help determine which codes and standards are necessary for safe installation and operation. Equipment

damage or serious injury to personnel can result from failure to follow all applicable codes and standards.

We do not guarantee the products described in the publication are suitable for your particular application,

nor do we assume any responsibility for your product design, installation or operation.

Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as

online control equipment in hazardous environments requiring fail-safe performance, such as in the

operation of nuclear facilities, aircraft navigation of communication systems, air traffic control, direct life

support machines or weapon systems in which the failure of the product could lead directly to death,

personal injury, or severe physical or environmental damage (“High Risk Activities”). ECI America, Inc.

specifically disclaims any expressed or implied warranty of fitness for High Risk Activities.

This publication is based on information that was available at the time it was printed. WE reserve the

right to make changes to the products and/or publications at any time without notice and without any

obligation.

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 6

2Introduction

The ECI MOVFR (Variable Frequency Drive) LCD Door Operating system is a 2 board combination

designed to be a drop in replacement for the GAL MOVFR door operator. The ECI VFD LCD door

operator includes a 230VAC input Variable Frequency Drive (VFD) board and a control board with key

pad and LCD screen. All adjustments and system monitoring are performed through the on board LCD

screen eliminating the need for an external handheld device. All control inputs are compatible with 24 to

230 volt AC or DC signal or dry contact voltages.

3Conventions Used

When you see the “notepad” icon in the left-hand margin, the paragraph to its

immediate right will be a special note. Notes represent information that may make

your work quicker and more efficient. The word NOTE: in boldface will mark the

beginning of the text.

When you see the “exclamation point” icon in the left-hand margin the paragraph

to its right will be a warning. The information could prevent injury, loss of

property, or even death in extreme cases. Any waring in this document should be

regarded as critical information that should be read in its entirety. The word

WARNING: in boldface will mark the beginning of the text.

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 7

4Safety Information

Know the safety hazards related to any procedure you are about to perform.

Know what equipment has been specified for each specific contact and know

what tools and materials you should plan to have available. Before connecting

electrical wiring, take precautions to prevent accidents from happening to

yourself and others around you.

ALWAYS CONSIDER SAFTY FIRST!

•Wear a hard hat when working in the hoist way.

•Wear safety glasses or goggles when using power tools

•Always wear protective gloves when installing or removing access covers,

conduits, wire way or electrical devices.

•When working on car canopy, always be aware of where the sides of the car are

located.

•Use properly grounded cords and power equipment (ground fault circuit

interrupters).

•Make sure there are proper clearances in hoist way between the car and other

devices. Before connecting wiring, cover sharp edges to keep hands and arms

from being cut.

•Always know where other people are and how the elevator wiring can affect

their safety.

•Safety lock and tag out procedures are always required before performing and

kind of service, repair, adjustment, lubrication or inspection of power equipment.

•To reduce the danger of electrical shock, always make sure electrical

connections are secure. Also make sure no bare wires are exposed after pulling

cable.

•Use a circuit tester to be certain the circuit is not active before touching it.

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 8

5System Overview

5.1 Control Board

Figure 1 - Control Board

5.1.1 Electrical

5.1.2 Connections

5.1.2.1 Input Signals

•CLOSE –Any 24 to 240 VAC/VDC input between CLOSE and COM will produce a CLOSE

operation.

•OPEN –Any 24 to 240 VAC/VDC input between OPEN and COM will produce a OPEN

operation.

•NUDG –Any 24 to 240 VAC/VDC input between NUDGE and COM, with a CLOSE input

present, will produce a NUDGE operation

•HEAVY –Any 24 to 240 VAC/BDC input between HEAVY and COM, with OPEN or CLOSE

valid, will move the door at the HEAVY parameter settings.

•COM –Common input for OPEN, CLOSE, and NUDGE inputs.

5.1.2.2 Output Relay Contacts

•AUX NO

•AUX COM Auxiliary Relay contacts rated at 230V 10A. Energized when AUX optical

•AUX NC sensor blocked

•DPM NO

•DPM COM DPM Relay contacts rated at 230V 10A. Energized when DPM optical

•DPM NC sensor blocked

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 9

•REOPEN NO

•REOPEN COM REOPEN Relay contacts rated at 230V 10A. Energized

•REOPEN NC when torque limit exceeded, obstruction of light curtain.

•DCL NO

•DCL COM DCL Relay. Door Close Limit contacts rated at 230V 10A. Energized when

•DCL NC DCL optical sensor blocked

•DOL NO

•DOL COM DOL Relay. Door Open Limit. Energized when DOL optical sensor

•DOL NC is blocked

5.1.2.3 Interfacing with Light Curtain

When there is an obstruction of the edges the REOPEN LED will light and the REOPEN relay will

energize sending a command to the controller to OPEN the doors. The light curtain connectors CN4 and

CN5 are interchangeable.

5.1.2.3.1 Formula Systems ®

•The REOPEN relay contacts should be connected to the controller as shown in Figure 2 - Reopen

Contact Connection

Figure 2 - Reopen Contact Connection

•CN4 and CN5 should be wired as shown in Figure 3- Formula Systems® Wiring

Figure 3- Formula Systems® Wiring

5.1.2.3.2 Tri-Tronics (Leading Edge)®

•The REOPEN relay contacts should be connected to the controller as shown in Figure 2 - Reopen

Contact Connection.

•CN4 and CN5 should be wired as in Figure 4- Tri-Tronics® wiring

ECI MOVFR-LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com P a g e | 10

Figure 4- Tri-Tronics® wiring

5.1.3 User Interface

5.1.3.1 LCD Screen Main Menu

Figure 5 - LCD Screen Main Menu

Figure 5 - LCD Screen shows the main menu. Pressing the “-“ button moves the curser down to

the next selection. Pressing “+” button moves curser up.

There are 6 selections to the main menu.

•Edit parameters –Pressing ENTER with the Edit Parameters hi-lighted will enter the

parameters menu.

•Load Defaults –Pressing ENTER with Load defaults hi-lighted will load the default settings

for all parameters

•Diagnostics 1 –Pressing ENTER with Diagnostics hi-lighted will display the first

diagnostics screen.

•Diagnostics 2 –Pressing ENTER with Diagnostics hi-lighted will display the second

diagnostics screen.

•Technical Support –(not shown) Pressing ENTER with Technical support hi-lighted will

display the technical support screen.

•Rotate screen –(Not shown above) Pressing ENTER with Rotate Screen hi-lighted will flip

the screen 180°

5.1.3.2 Control Board LEDs

•OPEN –Illuminated when OPEN input is valid

•CLOSE –Illuminated when CLOSE input is valid

•NUDGE –Illuminated when NUDGE input is valid

•HEAVY –Illuminated when HEAVY input is valid

ECI MOVFR

Edit parameters

Load defaults

Diagnostics 1

Diagnostics 2

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur