Eaton 93PM IBC-L Manuel utilisateur

Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions

Use these instructions to install cabinet top and rear seismic tie straps to secure the Uninterruptible Power

Supply (UPS) and Sidecar Integrated Accessory Cabinet (SIAC), and when installed in a line-up-and-match

configuration the Integrated Battery Cabinets (IBCs) and Integrated Accessory Cabinets (IACs).

To install the tie straps:

1. Unload and mechanically install the UPS and IBCs, and if applicable IACs, according to the instructions in

the applicable installation and operation manual.

2. Remove the screws along each adjacent cabinet top panel securing the top panels (see Figure 1). Retain

the hardware for later use.

3. Install top tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Secure the tie strap with

retained hardware.

4. If the long rear shipping bracket (tie strap) is installed between the UPS and an SIAC and no

line-up-and-match IBC or IAC is installed, proceed to Step 7; otherwise, proceed to Step 5.

5. Remove the screws along each adjacent cabinet (UPS, SIAC, IBC, or IAC) rear panel securing the cabinet

rear panels (see Figure 1). Retain the hardware for later use.

6. Install rear tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Ensure strap is installed at the

top of the cabinet. Secure the tie strap with retained hardware.

7. Installation is complete.

For More Information

Refer to the applicable Eaton 93PM Installation and Operation manual for the following additional information:

lInstallation instructions, including site preparation, planning for installation, wiring and safety information,

and detailed illustrations of cabinets with dimensional and connection point drawings

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain

copies of these manuals.

Getting Help

If help is needed with any of these instructions, please call the Customer Reliability Center at:

United States: 1-800-843-9433

Canada: 1-800-461-9166 ext 260

All other countries: Call your local service representative

Please use the following e-mail address for comments, suggestions, or to report an error in these instructions:

E-ESSDocumentation@eaton.com

NOTE Refer to the applicable installation and operation manual supplied with the UPS,

SIAC, IBC, or IAC for dimensions and required clearances.

Seismic Tie Straps (part of Seismic Mounting Bracket Kit)

Top Tie Strap (Only provided with UPS kits. Strap is provided as standard with IACs. and IBCs) 1

Rear Tie Strap 1

2 Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions P-164000471—Rev 1 www.eaton.com/powerquality

Figure 1. Typical Top and Rear Seismic Tie Strap Installation

Eaton is a registered trademark of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are

property of their respective companies.

reproduced in any way without the express written approval of Eaton Corporation.

*P-164000471 1*

P-164000471 1

Cabinet Top

Seismic Tie Strap

Cabinet Rear

Seismic Tie Strap

Autres manuels pour 93PM IBC-L

Table des matières

Autres manuels Eaton UPS

Eaton

Eaton 9155 N Manuel utilisateur

Eaton

Eaton Power Xpert 9395P-900 Series Manuel utilisateur

Eaton

Eaton Powerware 9395 Manuel utilisateur

Eaton

Eaton 9PX2000RT-L Instructions de montage

Eaton

Eaton Ellipse ECO 500 Manuel utilisateur

Eaton

Eaton 9PHD Manuel

Eaton

Eaton Powerware 9135 Manuel utilisateur

Eaton

Eaton Power Xpert 9395P Manuel utilisateur

Eaton

Eaton Powerware 9170+ Manuel utilisateur

Eaton

Eaton Powerware BladeUPS Bar Manuel utilisateur

Eaton

Eaton 5S 550 Manuel utilisateur

Eaton

Eaton Power Xpert 9395 Plus Manuel utilisateur

Eaton

Eaton 9E10000i Manuel utilisateur

Eaton

Eaton Powerware 9155 Manuel utilisateur

Eaton

Eaton Ellipse PRO 650 Manuel utilisateur

Eaton

Eaton 5S 1000 Manuel utilisateur

Eaton

Eaton 93PM-L IAC-B Manuel utilisateur

Eaton

Eaton Powerware 5130 Manuel utilisateur

Eaton

Eaton 5P 1150VA RM Manuel utilisateur

Eaton

Eaton Powerware 5110 Manuel utilisateur

Eaton

Eaton Powerware 9355 Manuel utilisateur

Eaton

Eaton E.T.N 1500 VA - 60kVa Manuel utilisateur

Eaton

Eaton Power Xpert 9395 Manuel utilisateur

Eaton

Eaton 5E Gen2 Instructions de montage

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

ZincFive

ZincFive BC Series Manuel utilisateur