Eaton ELC-GPXFERMOD Manuel utilisateur

IL05003013E.pdf

ELC-GPXFERMOD

GP Transfer Module Instruction Sheet

WARNING

Always read this manual before using the ELC-GPXFERMOD.

ELC-GPXFERMOD doesn’t support plug and play function. Please turn off power before plugging in

ELC-GP02 or ELC-GP04.

The voltage for ELC-GPXFERMOD is supplied from GP extension port. Please confirm

ELC-GPXFERMOD plugged direction when connecting to GP extension port to avoid serious damage.

ELECTRICAL SPECIFICATION

Item ELC-GPXFERMOD

Data Reserved Life 20 years

Times for Writing In 100,000 Cycles

Operation Temperature 0ºC~55ºC

Weight / Dimension 3g / 50.85×19.8×10 mm

MEMORY TRANSFER MODULE FUNCTIONS

The function of transfer module that ELC-GP Series provides to copy user program, system function and

passwords is different from the copy program. It is used to copy the whole HMI environment settings and

application programs to another HMI rapidly. It can save much time and manpower. The operation is in the

following.

Definition: Transfer module (ELC-GPXFERMOD) = XMOD, GP Series = GP

Step GPÆXMOD XMODÆGP

1 Turn the switch on the XMOD to GPÆXMOD Turn the switch on the XMOD to XMODÆGP

2 Insert the XMOD into the expansion port of GP Insert the XMOD into the expansion port of GP

3 Input the power to GP Input the power to GP

4 It will display “remove XMOD” on the screen and

power on again It will display “remove XMOD” on the screen and

power on again

IL05003013E.pdf

HMI display message

GPÆXMOD (Copy HMI program to XMOD) XMODÆGP (Copy program in XMOD to HMI)

If the model type of GP does not correspond with the

model type of program of XMOD. GP will display:

GP series and XMOD is different

Press Enter to Confirm

GP seriesÆXMOD

Press Esc to Exit

(Application of GP04G and GP02G can’t be used each

other)

If there is no program in XMOD. GP will display:

The XMOD is Empty

XMOD ÆGP series is illegal

If the model type of GP does not correspond with the

model type of program of XMOD.

GP series and XMOD is different

Please Remove the XMOD

and Reboot

If the model type of GP corresponds with the model

type of program of XMOD. GP will display:

Press Enter to Confirm

GP seriesÆXMOD

Press Esc to Exit

Press <Enter> ton confirm to copy.

When executing writing in (data is transmitting and

indication LED of RS-485 will light, only for GP04) GP

will display:

GP series ÆXMOD

Please wait!

If the model type of GP corresponds with the model

type of program of XMOD. GP will display:

Press Enter to Confirm

GP seriesÆXMOD

XMODÆGP series

Press Esc to Exit

Press <Enter> ton confirm to copy.

When executing writing in (data is transmitting and

indication LED of RS-485 will light, only for GP04) GP

will display:

XMOD ÆGP series

Please wait!

When completing transmitting, GP will display:

Please Remove the XMOD and Reboot

Please turn the power off and remove XMOD from GP.

At this time, all program and system settings have

copied to XMOD.

When completing transmitting, GP will display:

Please Remove the XMOD and Reboot

Please turn the power off and remove XMOD from

GP.At this time, all program and system settings have

copied to XMOD.

DIMENSION AND INSTALLATION METHOD

(unit: mm)

Table des matières

Autres manuels Eaton Unité de contrôle

Eaton

Eaton ELCM Series Manuel utilisateur

Eaton

Eaton EP Control Manuel utilisateur

Eaton

Eaton Vickers CM2 Series Manuel utilisateur

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD Series Manuel utilisateur

Eaton

Eaton ELC-COENETM Manuel utilisateur

Eaton

Eaton SL4-SWD Series Manuel

Eaton

Eaton CEAG CG IV Manuel utilisateur

Eaton

Eaton Powerware PowerPass 9125 Manuel utilisateur

Eaton

Eaton SmartWire-DT SWD Series Manuel utilisateur

Eaton

Eaton Cutler-Hammer Digitrip RMS 510 Manuel

Eaton

Eaton EC4E-221-6D4T1 Manuel utilisateur

Eaton

Eaton ELC-AN04ANNN Manuel utilisateur

Eaton

Eaton Char-Lynn 5 Series Manuel utilisateur

Eaton

Eaton Cutler-Hammer IQMSSPM Manuel utilisateur

Eaton

Eaton SM65 Manuel utilisateur

Eaton

Eaton Cutler-Hammer PanelMate ePro PS Series Manuel utilisateur

Eaton

Eaton CEAG DLS/3PH-BUS-Module-inverse Manuel de service

Eaton

Eaton Crouse-hinds series Manuel utilisateur

Eaton

Eaton BreakerVisu NZM-XMC-MDISP35-MOD Manuel utilisateur

Eaton

Eaton Power Xpert PXGMS Manuel de programmation

Eaton

Eaton ATC-300+ Manuel utilisateur

Eaton

Eaton Vickers RF Series Manuel utilisateur

Eaton

Eaton Cutler Hammer PanelMate ePro 7685 8 Series Manuel utilisateur

Eaton

Eaton PRC-E Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Flyron

Flyron FN-BC04 Manuel utilisateur