e-Joe ANGGUN Manuel utilisateur
ANGGUN USER MANUAL
Please read before operating your new bicycle.
e-JOE Bike, Inc.
Phone: 855-888-1891
E-Mail: sales@ejoebike.com
Website: http://ejoebike.net
2
Contents
Introduction ............................................................................................................................................................................ 3
Warranty ................................................................................................................................................................................. 4
Opening Your Bicycle ..............................................................................................................................................................5
Structure of your new Electric Bicycle .................................................................................................................................... 6
Main Specifications: ANGGUN ................................................................................................................................................ 7
Brakes.................................................................................................................................................................................... 12
Brake Precautions .............................................................................................................................................................12
Gears ..................................................................................................................................................................................... 17
Seat and Handlebar Safe Height Mark..................................................................................................................................13
Vertical Handle Stem Position (Handlebars)..................................................................................................................... 13
Adjustment Method:......................................................................................................................................................... 13
Seat Cushion Position........................................................................................................................................................ 13
Battery and Charger Indicators .............................................................................................................................................15
Battery Access Slot............................................................................................................................................................15
Bicycle Battery Charge Indicator Lights ............................................................................................................................15
Charger Indicator ..............................................................................................................................................................15
Battery Precautions...............................................................................................................................................................16
LCD Screen ............................................................................................................................................................................ 17
LCD Level Indicators .......................................................................................................................................................... 17
Changing Settings on the LCD Display...............................................................................................................................17
General Operating Instructions............................................................................................................................................... 8
Before You Ride for the First Time:..................................................................................................................................... 9
Electric Assist - LED Operating Instructions ........................................................................................................................ 9
During and after Riding: Instructions and Tips ....................................................................................................................... 9
Installing the Batteries of the LED Lights ..............................................................................................................................10
Front LED Light batteries...................................................................................................................................................10
Installing the Rear LED Light .............................................................................................................................................10
Using the Kickstand...........................................................................................................................................................10
Maintenance ......................................................................................................................................................................... 18
Water .................................................................................................................................................................................... 18
Replacement Key .................................................................................................................................................................. 18
Simple Troubleshooting ........................................................................................................................................................19
Contact Us............................................................................................................................................................................. 21
3
Introduction
Congratulations on the purchase of your new e-bike! We hope and believe your new bike will bring lots of fun
and in turn make you happy.
We ask that you please read this manual thoroughly, paying special attention to the safety warnings before
you start riding your bicycle.
Please observe traffic regulations and do not lend your bicycle to anyone who is unfamiliar with it. The bicycle
can only be legally used on the road by a person aged 14 years and older.
We strongly advise you to always wear a bicycle helmet when using your e-bike. If you are unfamiliar with
cycling, we suggest taking a cycle proficiency course prior to using your bicycle.
Before you ride your bike for the first time, please verify that it has been correctly assembled. You can do this
either by taking it to your nearest bicycle shop, or if you are proficient in bicycle mechanics, you can do the
inspection yourself. Please check the pedals, saddle, handlebars and any self-assembly items have been
correctly fitted.
Test your brakes prior to riding the bike every time you use it and remember the bike will not stop as quickly
in wet or icy conditions as it would on a dry road.
Check your tire pressures frequently. They should be at 60 psi (4.1 bar). Low tire pressures may result in
damage to the tires and will massively reduce your range.
NEVER drink alcohol and ride your electric bike. The use of alcohol greatly reduces reflexes and limits your
ability to ride safely. Even a very small amount of alcohol will limit your ability to be safe on the road.
When you need to replace your battery, please either dispose it properly or send it back to us or your retailer
and we will make sure it is properly recycled.
Happy cycling!
Your friends at e-JOE Bike
4
Warranty
LIMITED ONE (1) YEAR COMPONENTS WARRANTY
Forks, stem, handlebar, seat post, saddle, brakes, cables, bottom bracket, crank set, pedals, chain, rims,
spokes, wheel hub, freewheel, cassette, derailleur, shifter, motor, throttle, controller, wiring harness, kick
stand, reflectors and hardware are warranted to be free from manufacture defects in materials and/or
workmanship for a 1 year period from the date of original purchase.
LIMITED ONE (1) YEAR BATTERY WARRANTY
Lithium Ion batteries are warranted to be free from manufacture defects in materials and/or workmanship for
a 1 year period from the date of original purchase (cycle life or deep charge up to 70% full capacity).
LIMITED 30 DAYS FULL REPLACEMENT WARRANTY
If an e-JOE bicycle is not working properly because of a major defect within the first 30 days, e -JOE Bike, Inc.
will repair or replace any defective e-JOE Bicycle at its sole option and expense upon determining whether the
damage, failure, or loss is due to a major defect. e-JOE Bicycle will have sole discretion to determine whether
the damage, failure, or loss is due to a major defect or otherwise.
TERMS OF WARRANTY
This warranty only applies to the original owner of an e-JOE Bicycle bike.
Proof of purchase is required for all warranty claims.
This warranty is for replacement parts ONLY and does NOT cover the cost of labor.
This warranty covers shipping costs for dealers ONLY.
oIf you believe your bicycle needs service, or are experiencing problems with your bicycle, e-JOE
Bicycle encourages you to bring your bike to your nearest electric bike dealer for warranty
determination and assistance.
This warranty does not cover any damages or defects resulting from failure to follow instructions in t he
owner’s manual, acts of God, accidents, misuse, neglect, abuse, commercial use, modification, or
improper assembly.
This warranty does not include covering normal wear-and-tear parts (ex. Tires, tubes, brake, etc.).
This warranty does not cover parts damaged by an attempted repair unless performed by an
authorized dealer of e-JOE Bicycle with e-JOE Bicycle’s knowledge.
e-JOE Bicycle Inc. reserves the right to refuse any warranty claim.
5
Opening Your Bicycle
When receiving your bicycle, your package should contain the following items:
The main body of the electric bike consisting of:
oFrame
oRear wheel
oGear and chain
oDisc Brakes (front/rear)
oBattery
oRear fender
The handlebar subassembly
oThis sub-assembly is still connected to the main body by the brake cables and electrical wires.
The brake levers and gear controls of the handlebar are already assembled. Additionally, the
LCD Display is mounted on the center of the handlebar. The Display shows speedometer, trip
meter, PAS level, and battery level.
The seat (or saddle) which is attached to the pedestal stem
The front wheel with front brakes
The front wheel fender with supports
Front and rear reflector assembly (on LED lights)
Front and rear LED lights
Pedals (2)
Battery charger- in a separate box
Mini tool kit for assembly and/or repairs
Keys (2)
Please contact your dealer or e-JOE Bicycle if any of these parts are missing.
6
Structure of your new Electric Bicycle
Currently electric bicycles can be divided into two classes: TAG (Twist And Go) and PAS (Peda l Assistance
System). The ANGGUN belongs in the PAS classification. Refer to the picture below for structure and parts.
7
Main Specifications: ANGGUN
Bike
Weight
55 lb
Max Capacity
300 lb
Dimension
59.5 x 10 x 26 in
Max speed
20 mph
Full charge
distance
up to 60 mi
Climbing grade
≤10% grade
Motor
Description
350W Rated Peak 530W Brushless Geared Hub Motor
Max riding noise
≤ 60 db
Rated power
350W
Rated RPM
235 r/min
Battery capacity
36V
Rated efficiency
80%
kWh
62mi≤1.2kWh/62mi
Battery
Type
Lithium Polymer
Voltage
36V
Capacity
15Ah
Charger
Input voltage
AC120V/60Hz
Charging time
Approx. 4 hrs
How to charge
Direct charge: Connect plug with plug receptacle.
8
Assembly
Necessary Tools
5 mm Allen Key, 6 mm Allen Key, 15 mm Wrench
Step 1: Handlebars
Stand the main body of the electric bike on the kickstand. Insert the stem of the
handlebar sub-assembly into the steering column that is at the front of the main
body frame.
Make sure that the fork that will hold the front wheel is pointing forward, and orient
the handle bar accordingly. Insert the stem all the way and tighten from the top
using a big 6 mm Allen Wrench.
Step 2: Front Wheel Fender
Make sure the fork from the steering column is pointed forward. Place the front fender within the fork: locate
the small projection with a screw hole at the top of the fender, fit it to the bolt at the back of the base of the
seating column; attach the supports (one on each side) to the base of the fork using two small bolts provided
for you. After all three points (the dorsal point and the two support points) are properly attached, use a 5 mm
Allen Key to tighten.
Step 3: Attach the Front Wheel
Make sure the fork from the steering column is pointed forward. Place the front wheel within the fork and
between the brake pads and disc rotor on either side, seat the axial stem properly within the receptacles at
the tips of the fork, and tighten the nuts (quick release if equipped) with a 15 mm wrench. Make sure that the
front wheel moves freely and does not wobble from side to side. Re-position with wheel and re-tighten if
necessary.
Step 4: Assembling and Adjusting the Disc Brake
*You may need another person to help you with this step.*
The front brake is installed and assembled so the cable is relaxed to allow the insta llation of the front wheel.
After properly installing the front wheel, the cable can be tightened again if necessary. The front brake is pre -
adjusted for you during inspection and should not need too much adjustment during assembly.
If further adjustments must be made, we suggest to have the brakes to be adjusted by your local bike
mechanic shop. Otherwise, you could try to adjust the disc brake by referring to the how -to adjust disc brakes
on the internet.
Test the brake by lifting the front of the electric bike and setting the wheel in motion by turning it and apply
the brake at the handlebar to stop it. If you cannot set the wheel in free motion, or cannot stop it when
9
applying the brake you need to readjust by increasing or decreasing the clearance betwe en the brake pads
and the wheel.
General Operating Instructions
Before You Ride for the First Time:
Check that the handlebar and handlebar stem are properly tightened
Check all other nuts and bolts and fixings are properly tightened, paying particular attention to the
motor fixings, kick stand, yoke, and steering head bearings
Check that brakes and brake levers are functioning properly
Check that tire pressures are 60 psi/4.1 bar and that tires are not damaged
Check that reflectors and lights are functioning properly
Make sure battery is fully charged
Load battery into bicycle and turn on by switching the plugged in key to the right side (IGNITION mode)
To turn ON the e-bike, press and hold the POWER button (on the left hand side of the handlebar) for 3
seconds. The LCD display on the center of the handlebar should lighted up and you should see the all
the display there (battery level, PAS level, speedometer, and trip meter)
Electric Assist - LCD Operating Instructions
When you first turn on your electric bike, your LCD Electric Assist Display will automatically go into the default
setting: Pedal Assist System will be turned on and battery level indicator will be turned on.
[ + ] and [ - ] Buttons on the Left Hand side of the handlebar:
oWhen pressing the either [ + ] or [ - ] button once, the PAS level will be adjusted as shown on
the LCD display. The highest level is [ 3 ] with the [ + ] button. To get to the hidden turbo mode,
[ 4 ], the user needs to press the POWER button once.
oWhen pressing [ - ] button repeatedly, the PAS level will go down to the lowest possible [ 0 ]
meaning that the bike will not assist the rider during pedaling.
oThrottle mode is independent on this bike since there is a RED push button on the right side of
the handlebar. When the button is pushed in, this means that the THROTTLE mode is activated
(ON). When the red button is pushed out, then the THROTTLE mode will not be active (OFF).
User can either have PAS mode only (THROTTLE mode OFF), THROTTLE mode only (PAS mode OFF), or
both THROTTLE and PAS mode active.
To turn off all electric assist, hold the POWER button down for 3 seconds, or until all LCD display lights
are off. For your safety, please turn off the power key on the battery when bike in not in operation.
During and after Riding: Instructions and Tips
10
Once the bike is powered ON and the red throttle button is engaged, when the rider twists the twist
throttle, the bike will move forward! Do not turn the power ON until you are ready to go.
oUsing the hand brake or releasing the throttle will automatically cut the power to the motor.
To get the furthest distance range, it is recommended to pedal the bicycle with the Pedal Assist System
mode ON.
When riding down hills, do not turn off power. Doing so can easily damage the controller and motor.
When riding your e-bike when the battery power is low, it is recommended to pedal your e-bike as
much as possible and charge the battery as soon as you get to an electrical outlet.
Turn off the power and remove the key while parking. If you decide to push your bike for any reason,
make sure to turn the power off so you don’t accidentally turn the throttle on and make the electrical
bicycle start suddenly and cause an accident.
To help get the best distance out of your electric bike, refrain from unnecessary braking and coast as
much as possible.
Installing the Batteries of the LED Lights
Front LED Light batteries
The batteries of the front LED light come pre-installed.
To replace the batteries: The front LED light sits on a small track so that the light can be easily removed. Press
the lever that is behind the front LED light in a downward position. Pull the light forward off of the track. Insert
3 AAA batteries. Turn the front LED light on and off using the power button sitting on to p of the light.
Installing the Rear LED Light
The batteries for the rear LED light are not preinstalled. You will need to insert the batteries that are included
in the packaging of your brand new ANGGUN.
To insert and replace the batteries: Reach under the rear light. There is a piece that will stick out farther than
the sides. This is the removal lever. Pull the lever straight back and then upward. Insert the 2 AA batteries that
are included with your brand new bicycle. Turn the rear LED light on and off using the power button sitting on
top of the light.
Using the Kickstand
The ANGGUN is equipped with a stabilizing kickstand that aims to support both sides of the bicycle.
Secure the Bicycle for Kickstand Maneuvering
Place one hand on handlebar and the other on the seat to stabilize the bicycle
Table des matières
Autres manuels e-Joe Vélo
