Dynojet Power Commander III USB EX Manuel utilisateur

i224-411EX 2006-2007 Kawasaki ZX14 - PCIII USB EX - 1

2006-2007 KAWASAKI

ZX14

NSTALLATION

NSTRUCTIONS

Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993

DOWNLOAD THE POWER COMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE:

WWW.POWERCOMMANDER.COM

LEASE

EAD

IRECTIONS

EFORE

TARTING

NSTALLATION

ARTS

IST

quantity description

1 power commander EX

1 USB cable

1cd-rom

1 installation guide

1 power adapter

2 power commander EX decal

2 dynojet decal

2 velcro strip

1 alcohol swab

2ziptie USB port

expansion port

i224-411EX

2006-2007 Kawasaki ZX14 - PCIII USB EX - 2

The ignition must be turned OFF before

installation.

1 Remove the left hand fairing and inner fairing.

2 Remove the bolts securing the coolant reserve

bottle to the engine as shown in Figure A.

Allow the bottle to hang out of the way

temporarily.

3 Disconnect the stock wiring harness from the

throttle body harness as shown in Figure B.

These connectors are brown in color and are

located under the throttle bodies.

4 Temporarily lay the PCIII USB EX next to the

gauge panel and route the PCIII USB EX

harness along the stock wiring harness to the

throttle body connection as shown in Figure C.

Figure AFigure BFigure C

remove these bolts

stock harness

PCIII USB EX

harness

i224-411EX

2006-2007 Kawasaki ZX14 - PCIII USB EX - 3

5 Attach the connectors from the PCIII USB EX

to the stock wiring harness and throttle body

harness as shown in Figure D.

6 Attach the ground wire from the PCIII USB EX

to the frame using the stock upper bolt that

holds the coolant reserve bottle to the frame as

shown in Figure E.

Make sure the ground wire from the

PCIII USB EX is between the coolant bottle and

the frame.

7 Reinstall the coolant bottle.

8 Install the PCIII USB EX to the left hand ram air

tube. Use the supplied zip ties to secure the

PCIII USB EX harness to the stock wiring

harness. This will secure the unit in place

without the need to use the velcro.

9 Reinstall the bodywork.

Note: This bike uses a servo to hold the

throttle plate open during cold starts. Make

sure the bike is up to operating temperature

BEFORE resetting the throttle position on the

PCIII USB EX software.

10 Insert the cd provided into your computer’s

cd-rom drive.

11 Follow the on-screen instructions to install the

PCIII USB EX software.

Visit www.powercommander.com to download

software tutorials and the latest maps.

Figure DFigure EFigure F

PCIII USB EX

connectors

stock connector

stock bolt

PCIII USB EX

ground wire

ignition module

ground wire

zip tie

Table des matières

Autres manuels Dynojet Unité de contrôle

Dynojet

Dynojet Power Commander III USB EX Manuel utilisateur

Dynojet

Dynojet PCV F Manuel

Dynojet

Dynojet Power Commander III USB Manuel utilisateur

Dynojet

Dynojet Power Commander FC Manuel utilisateur

Dynojet

Dynojet Power Commander III USB EX Manuel utilisateur

Dynojet

Dynojet PCV I25-028 Guide de dépannage

Dynojet

Dynojet Power Commander III USB EX Manuel utilisateur

Dynojet

Dynojet PCV F/I Manuel utilisateur

Dynojet

Dynojet Power Commander III USB EX Manuel utilisateur

Dynojet

Dynojet Power Commander III Manuel utilisateur

Dynojet

Dynojet Power Commander III USB Manuel utilisateur

Dynojet

Dynojet PCIII USB Manuel utilisateur

Dynojet

Dynojet Power Commander 3 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur