Always constantly monitor the temperature of the•
battery pack while charging.
Always end the charging process if the charger•
or battery becomes hot to the touch or starts to
change form (swell) during the charge process.
This is a sophisticated hobby product and NOT a toy. It
must be operated with caution and common sense and
requires some basic mechanical ability. Failure to
operate this Product in a safe and responsible manner
could result in injury or damage to the product or other
property. This product is not intended for use by
children without direct adult supervision. This manual
contains instructions for safety, operation and
maintenance. It is essential to read and follow all the
instructions and warnings in the manual, prior to
assembly, setup or use, in order to operate correctly
and avoid damage or injury.
OPERATION INSTRUCTIONS
1. Before using, initial charge time will be 10–12
hours. Subsequent charging time is may be as
long as 8 hours. Only use the Dynamite Li-Po Glow
Driver 1S charger for this purpose.
2. Connect the glow igniter to the charger by connect-
ing the output end of the charger to the input hole
of the glow igniter. Then, plug the charger into a
wall socket. The red LED on the charger indicates
that the unit is charging. When charging is com-
plete, the red LED on the charger will go out.
3. To connect to your engine’s glow plug simply
depress spring loaded plunger and release when in
place on glow plug’s hexagonal body.
4. When the LED on the igniter turns green, the glow
igniter is working normally. When the LED on the
igniter turns red the battery is about to run out
of power. This indicates the battery is in need of
charging.
If the LED on the igniter is off, it means this glow
igniter may be faulty or the glow plug has failed.
WARRANTY AND REPAIR INFORMATION
Exclusive Warranty- Horizon Hobby, Inc., (Horizon)
warranties that the Products purchased (the “Product”)
will be free from defects in materials and workmanship
at the date of purchase by the Purchaser.
Limited Warranty
Horizon reserves the right to change or modify
this warranty without notice and disclaims all
other warranties, express or implied.
(a) This warranty is limited to the original Purchaser
(“Purchaser”) and is not transferable. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY
IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This
warranty covers only those Products purchased from
an authorized Horizon dealer. Third party transactions
are not covered by this warranty. Proof of purchase is
required for warranty claims.
(b) Limitations- HORIZON MAKES NO WARRANTY OR
REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE
HAVE DETERMINED THAT THE PRODUCT WILL
SUITABLY MEET THE REQUIREMENTS OF THE
PURCHASER’S INTENDED USE.
(c) Purchaser Remedy- Horizon’s sole obligation here-
under shall be that Horizon will, at its option, (i) repair
or (ii) replace, any Product determined by Horizon to
be defective. In the event of a defect, these are the
Purchaser’s exclusive remedies. Horizon reserves the
right to inspect any and all equipment involved in a
warranty claim. Repair or replacement decisions are
at the sole discretion of Horizon. This warranty does
not cover cosmetic damage or damage due to acts of
God, accident, misuse, abuse, negligence, commercial
use, or modification of or to any part of the Product.
This warranty does not cover damage due to improper
installation, operation, maintenance, or attempted repair
by anyone other than Horizon. Return of any goods
by Purchaser must be approved in writing by Horizon
before shipment.
Damage Limits: HORIZON SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL
LOSS IN ANY WAY CONNECTED WITH THE PRODUCT,
WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
Further, in no event shall the liability of Horizon exceed
