Duerkopp Adler 868 Manuel utilisateur
868
Special Sewing Machine
Instruction manual
Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld
Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com
Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:
03/2011 Rev. index: 00.0 Printed in Federal Republic of Germany 0791 868751
All rights reserved.
Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner,
even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.
Copyright © Dürkopp Adler AG - 2011
Foreword
This instruction manual is intended to help the user to become familiar
with the machine and take advantage of its application possibilities in
accordance with the recommendations.
The instruction manual contains important information on how to
operate the machine securely, properly and economically. Observation
of the instructions eliminates danger, reduces costs for repair and
down-times, and increases the reliability and life of the machine.
The instruction manual is intended to complement existing national
accident prevention and environment protection regulations.
The instruction manual must always be available at the machine/sewing
unit.
The instruction manual must be read and applied by any person that is
authorized to work on the machine/sewing unit. This means:
–Operation, including equipping, troubleshooting during the work
cycle, removing of fabric waste,
–Service (maintenance, inspection, repair) and/or
–Transport.
The user also has to assure that only authorized personnel work on the
machine.
The user is obliged to check the machine at least once per shift for
apparent damages and to immediatly report any changes (including the
performance in service), which impair the safety.
The user company must ensure that the machine is only operated in
perfect working order.
Never remove or disable any safety devices.
If safety devices need to be removed for equipping, repairing or
maintaining, the safety devices must be remounted directly after
completion of the maintenance and repair work.
Unauthorized modification of the machine rules out liability of the
manufacturer for damage resulting from this.
Observe all safety and danger recommendations on the machine/unit!
The yellow-and-black striped surfaces designate permanend danger
areas, eg danger of squashing, cutting, shearing or collision.
Besides the recommendations in this instruction manual also observe
the general safety and accident prevention regulations!
General safety instructions
The non-observance of the following safety instructions can cause
bodily injuries or damages to the machine.
1. The machine must only be commissioned in full knowledge of the
instruction book and operated by persons with appropriate training.
2. Before putting into service also read the safety rules and
instructions of the motor supplier.
3. The machine must be used only for the purpose intended. Use of
the machine without the safety devices is not permitted. Observe all
the relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, presser foot, needle
plate, feed dog and bobbin) when threading, when the workplace is
left, and during service work, the machine must be disconnected
from the mains by switching off the master switch or disconnecting
the mains plug.
5. Daily servicing work must be carried out only by appropriately
trained persons.
6. Repairs, conversion and special maintenance work must only be
carried out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems, disconnect the
machine from the compressed air supply system (max. 7-10 bar).
Before disconnecting, reduce the pressure of the maintenance unit.
Exceptions to this are only adjustments and functions checks made
by appropriately trained technicians.
8. Work on the electrical equipment must be carried out only by
electricians or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted,
except as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us
and made only in adherence to all safety regulations.
11. For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such time as
the entire sewing unit is found to comply with EC directives.
13. The line cord should be equipped with a country-specific mains
plug. This work must be carried out by appropriately trained
technicians (see paragraph 8).
It is absolutely necessary to respect the safety
instructions marked by these signs.
Danger of bodily injuries !
Please note also the general safety instructions.
Contents Page:
Part 2: Installation Instructions Class 868
1 Scope of Delivery ............................................ 5
2 General and transport packing .................................... 5
3 Assembling the stand
3.1 Assemblingthestandcomponents(Standard)............................ 7
3.2 Assemblingthetableplate ....................................... 7
3.3 Settingtheworkingheight........................................ 8
4 Sewing drives
4.1 Drivecategory,typeanduse...................................... 9
4.2 Drive-packcomponents......................................... 9
4.3 Fittingthesewingdrive.......................................... 10
4.4 Fittingthepedal.............................................. 10
4.5 Fitting the sewing-drive control for machines with Efka DC 1550 / DA 321G ......... 11
4.6 Fittingthesetvalueinitiator....................................... 11
5 Assembling the machine head
5.1 Fittingthehingesonthemachinehead................................ 12
5.2 Fitting the direct drive (Efka DC 1550/DA321G) ........................... 13
5.3 Tensioning the toothed belt of the direct drive (Efka DC 1550/DA321G) ............ 13
5.4 Placingthesewingmachineheadonthestand........................... 14
5.5 FittingandtensioningtheV-belt.................................... 15
5.6 Fittingthebeltcover........................................... 16
5.7 Fittingtheoilsuctiontube........................................ 17
5.8 Attachingthekneelever......................................... 18
5.9 Fittingtheoperatingpanel........................................ 19
5.10 Fittingthesewinglamp(optionalequipment) ............................ 20
6 Electrical connection
6.1 General................................................... 22
6.2 Checking the mains voltage ....................................... 22
6.3 Connectingthesewingdrive ...................................... 22
6.3.1 Connectingtheclutchmotor...................................... 22
6.3.2 Connectingthedirect-currentpositioningactuator......................... 22
6.4 Earthing................................................... 23
6.5 Connectingthesewingdrivetothemains.............................. 24
6.6 Connectingthemachinehead ..................................... 24
6.7 Connectingthesewinglighttransformer(optionalequipment).................. 25
6.8 Connectingthedirectdrive....................................... 26
6.8.1 ConnectingtheHallsensor(optionalequipment).......................... 26
6.8.2 Attachingandconnectingthesewinglighttransformer(optionalequipment)......... 28
Contents Page:
6.8.3 Connection to the DA321G control unit ................................ 28
6.8.4 Connecting the sockets of the DA321G control unit ........................ 29
6.8.5 Connecting the DA321G control unit ................................. 29
6.8.6 Checking the direction of rotation of the sewing drive ....................... 30
6.8.7 Checking the positioning......................................... 30
6.8.8 Machine-specificparameters...................................... 31
6.9 Masterreset................................................. 31
7 Pneumatic connection
7.1 Pneumaticsewingfootlifting...................................... 33
8 Lubrication................................................. 34
9 Sewing test ................................................ 35
4
10
8
76
1
5
2
11
9
3
1 Scope of Delivery
What items are supplied depends on your order.
Prior to setting up, please check that all the required parts are
present.
This description refers to a special sewing machine, of which all
individual components can completely be delivered by Dürkopp Adler
AG.
–1Machine head
Dürkopp Adler accessory set box with:
–2Reel stand
–Protection cover (not represented)
–9Oil tray
Set of electronic parts, depending on the order, for:
Machines with Efka DC 1550 / DA321G actuator
–5Efka control unit
–11 Operating panel
–3Cover
Machines with clutch motor
–Main switch
–Sewing-drive
–Belt guard
Optional equipment
–8Stand (optional)
–7Pedal and linkage (optional)
–4Table top (optional)
–10 Drawer (optional)
–Knee lever
–Pneumatic sewing foot lifting
2 General and transport packing
Caution:
The special sewing machine must be set up by trained specialist
personnel.
Transportation locks
If the special sewing machine you have bought is already set up, the
following transport packing must be removed:
–Safety straps and battens on the machine head, table and stand.
–Safety block and straps on the sewing drive.
5
Observe the punch-marks of the table plate!
6
13
3
2
1
4
5
6
9
10
11
12
7
8
14
3,5x17 (x 6)
4,5x15 (x 4)
3,5x17 (x 2)
B8x35 (x 4)
3,9x15 (x 5)
15
Autres manuels pour 868
3
Table des matières
Autres manuels Duerkopp Adler Machine à coudre
Duerkopp Adler
Duerkopp Adler 511 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 523-105 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 69-373 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 743-420 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 527-105 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 204-102 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 205-64 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 296-FA11 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 525 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 1183i-7 Guide de dépannage
Duerkopp Adler
Duerkopp Adler 841-27 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler N291 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 558 Mode d’emploi
Duerkopp Adler
Duerkopp Adler FLP Series Additional guide Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 327 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 4181i Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 506-3 Mode d'emploi
Duerkopp Adler
Duerkopp Adler 195 Manuel utilisateur
Duerkopp Adler
Duerkopp Adler 743-331 Mode d’emploi
Duerkopp Adler
Duerkopp Adler 530 Manuel utilisateur
