DTOI Zcan Manuel utilisateur
QUICK START GUIDE
Download online
http://www.d-toi.com/zcanwireless.html
(Select Mac or Windows version)
1
Download with disc
2
3Installation 4
On
Off
Scan button (start/stop)
5Scan
Edit
7Charging Zcan wireless
8
Drag
6
Download Software Insert Dongle
Before Scanning
Red light
Important!
• Do not remove the USB dongle during driver installations.
• Operation is not guaranteed if this product is connected via a USB hub.
• Before Installation, please make sure Zcan+ software ( wired scanner mouse ) or all
other scan software are uninstalled.
• You are recommended to restart the computer after software installation.
If the Windows Security Alert window
appears, click [Allow access] to allow
installation of Zcan Wireless.
Select [Public network] in the
Set Network Location window
for the network of scanner mouse.
• Scan function requires Wi-Fi connection between computer and Zcan Wireless directly. Please add a
Wi-Fi adapter (802.11 n is recommended) if Wi-Fi function is not available in your computer.
• "SCANNER-XXXXXXX" will appear as an available network in your computer. Scan software will
switch the Wi-Fi connection to the scanner mouse's Wi-Fi access point when you press the scan
button, and return to the previous network after scanning.
Internet connection is not
available during scanning.
Mac Version
If the access key window appears,
you are suggested to click
(Always Allow) to allow your
Wi-Fi network in your keychain.
Scanning Tips
• The memory available will decrease according to the increase in mouse movements. When the
scan memory is used up, scanner mouse will stop scanning. Please finish scanning before the
memory is used up.
• The biggest scan size is A3, but the scan size varies greatly, depending on the PC's operating
environment. Set the resolution to [Low] to maximize the scan size. (This function is available only
on a PC that meets the system requirements.)
• If the scan window turns yellow or red during scanning, you may be moving your Zcan Wireless too
fast. Try to slow down.
[YELLOW]: The scanner mouse is moving too fast.
[RED]: Slow down immediately.
• Zcan Wireless will auto reduce the view size during the scanning process. Please use the scroll
wheel to enlarge/reduce the size of image to check if the scanned image is accurate or not.
• Zcan Wireless will not work on glass. Remove the glass from the document, or put document on top
of the glass surface.
Scanning Tips (con’t)
• Scanning wrinkled or creased documents, curled documents, torn documents or documents with
paper clips or staples, carbon paper, coated paper, extremely thin and translucent paper, or paper
with adhesive notes only, corner or edges of books, thick books and same pattern of images may
damage the documents or produce unwanted results.
An error message appears
• Are other applications running?
This product uses a lot of memory, so an error may occur when other applications are used during
the scanning process. If an error occurs, shut down the Zcan Wireless software, restart the software,
close other applications, and start scanning again.
• Are there many wireless networks around you?
Error messages might appear when pressing the scan button due to the interference around you. Try
to move to a location with fewer wireless networks for improvement.
Trouble Shooting Guide
The scan process and scan screen do not work correctly
• Does your PC's operating system meet the system requirements?
Please refer to "System Requirements" above.
• Is the Zcan Wireless connected to the USB 3.0 port?
If the product does not operate properly, reconnect it to the USB 2.0 port.
• Is system supporting problem of OpenGL?
Depending on your PC's operating system, the Zcan Wireless may operate correctly when OpenGL
rendering is disabled. Click [Settings] [Advanced] [Enable expert settings] check box, and
unselect the [Enable OpenGL rendering] check box. It should be noted, however, this setting slightly
reduces the scan size.
• Are there any game programs running?
If a game program is running during the scanning process, the scan may not work correctly. Close
all game programs before using Zcan Wireless.
• Are you using the latest versions of driver software?
Use the latest versions of your graphics card's driver software, USB interface driver software etc.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement
This transmitter must not be co-location or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
Product Description: Wireless Scanner Mouse
Model Number: Zcan Wireless
Under the influence of electrostatic phenomenon, the communication link between the PC and captioned
model could not be maintained and require the user to re-initialize the sample to resume the
communication link.
Disposal the device( environment)
At the end of the product lifecycle, you should not dispose of this product with normal household waste.
Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol
on the product, user's guide and/or box indicates this. Some of the product materials can be reused if
you take them to a recycling point. By reusing some parts or raw materials from used products you make
an important contribution to the protection of the environment. Please contact your local authorities in
case you need more information on the collection points in your area. Dispose of the battery pack in an
environmentally-friendly manner according to your local regulations.
www.d-toi.com/zcanwireless.html
© 2015 Systech Electronics Ltd
FCC ID: 2ABQ3-SSM003M
FCC ID: 2ABQ3-SSM003R
MADE IN CHINA
SSM-ZCWXX-0-QUM-4CBK-02
Specifications
Sensor Optical Mouse Sensor 1500 cpi
Resolution Up to 400 dpi
Scan size Up to A3 (Upon memory configuration)
USB Port USB 2.0
Specifications may vary without prior notice due to continuous efforts and improvements.
• DVD-ROM Device (for software)
• Internet connection for search, share and translation
• Internal/ external Wi-Fi adapter is required.
Memory At least 1 GB free hard disk space
RAM 2GB or more
128MB NVIDIA® GeForce® 8400 GS, or 128MB ATI Radeon™
X1300,384MB Intel® GMA X3000, or better
CPU Intel Core Duo 1.2 GHz or AMD Athlon™ 64 x2 1.7GHz or better
O/S Windows® 7 or above, Mac OS® X 10.9 or above
Requirements
Graphics card
Autres manuels pour Zcan
1
Autres manuels DTOI Souris
