DSPPA MAG6463 Manuel utilisateur

Public Address System

Wall Mount IP Speaker MAG6463

User Manual

Thank you for using our DSPPA public address system. Please read this User Manual carefully to

make better use of this equipment.

Gu a n g z h o u D S P PA A u d i o Co . , L t d .

http：//www.DSPPA.com

http：//www.dsppatech.com

This page is left blank for users’ notes

MAG—V1.3

Facture 2018-7-17

About the instructions

The instructions are used from the development completion date of the four-way network public

address terminal MAG6463.The instructions include product introduction, precautions

for use, instructions for system connection, instructions for product use, and technical

indicators of the product and other contents of the four-way network public address

terminal. Prior to connection, installation and use, the user shall carefully read the

instructions, and conduct operation according to indication in the instructions.

The instructions with the label on the back panel of the machine are the matters to be notice.

Please conduct use or operation according to these instructions during use.

Please properly keep the instructions in case of need.

Precautions

Please carefully read the following careful prior to operation and use.

Warning

In order to avoid the possible personal injuries, equipment or property loss to you and

others surrounding, please comply with the following basic precautions. These precautions

include but are not limited to the following cases:

Power / power cord

 When the power cord plug is unplugged,

please seize the plug instead of the power cord.

Direct dragging of the power cord may lead to

damages.

 Please do not place the power cord near the

heat source. Do not bend the power cord

excessively, and do not place it at the position

possibly trampled or causing trip.

 The equipment is connected with the electric

network source through the power cord plug.

In case of any failure or danger of the

equipment, connection between the equipment

and the power grid can be disconnected by

unplugging the power cord plug. Therefore, it

is required to place the power socket at the

position convenient for swap operation of the

power cord.

 When the power supply switch of the

equipment is in the "off" state, the machine is

not disconnected completely with the power

grid. The power cord plug shall be unplugged

from the power socket for safety when the

equipment is not used.

Laying position

 Please disconnect the power supply prior to

movement of the equipment.

 In order to avoid panel deformation or

damages to the internal components, do not

place the equipment in the extremely cold or

hot environment with dust or vibration.

 The equipment cannot be subject to water

drop or water splash, and the vase filled with

water and other articles cannot be placed on

the equipment.

Connection

 Before the equipment is connected with

other equipment, please disconnect the power

supply of these equipment firstly. Before the

power switch of the equipment is turned on or

turned off, please adjust all volumes to the

minimum.

 The terminal marked with symbol in the

equipment represents hazardous live, and

operation of connecting these terminals shall

be completed by the personnel guided.

When the abnormal circumstance is realized

 In case of any wear or damage of the power

cord, if the sound is suddenly interrupted

during equipment use, or abnormal smell or

smoke is sent therefrom, the professionals

shall overhaul the equipment.

Precautions for operation processing

 Please do not insert the finger into any gap

or opening of the equipment.

 Avoid any foreign matter (paper, plastic or

metal) from inserting or falling into any gap or

opening of the equipment. If it happens, please

immediately disconnect the power supply.

 Do not press the body on the equipment, or

place any heavy object on it. Avoid

overexertion during button or switch operation

or machine connection.

Please do not open

 Please do not open the machine cover plate

at discretion, so as to prevent electric shock.

 Please do not try to disassemble internal

parts of the equipment or conduct

transformation of any form. In case of any

anomaly, please immediately stop use, and

invite the professionals for overhaul.

Other precautions

 In case of any data loss or damage caused to

the equipment due to improper use or

transformation without authorization, our

company shall not assume any responsibility.

 Illustration in the manual is only used for

instructions, which may be different from the

screen appearing during actual operation of

the device. The real object shall prevail.

Network Public Address System MAG6463

Con te nt s

I. Product description....................................................................................................................................................1

1.1 About MAG6463 wall mount IP speaker....................................................................................................... 1

1.2 Performance features...................................................................................................................................... 1

II. Introduction of functions..........................................................................................................................................1

2.1 Rear panel....................................................................................................................................................... 1

III. Connection legend.................................................................................................................................................. 3

3.1 Schematic diagram of application of MAG6463 in the system..................................................................... 3

3.2 Schematic diagram of connection of interface of MAG6463........................................................................ 3

IV. Schematic diagram of installation...........................................................................................................................5

Packing list....................................................................................................................................................................7

Performance specification.............................................................................................................................................7

* * Network PA System

Network PA System MAG6463

I. Product description

1.1 About MAG6463 wall mount IP speaker

MAG6463 wall mount IP speaker networked speaker is a networked all-digital analog-digital conversion

signal processor with high fidelity speaker based on TCP/IP transmission protocol, so as to realize modern

network display terminal with the overall design of the processor and sound box. Dual network redundancy design.

It can be coupled at any place with access to network. The remote audio data stream can output the audio signal

through the machine, and directly send sound from the sound box with intelligent control of the host machine;

a-way auxiliary audio input is used to connect other audio source device (such as DVD), and a way auxiliary

audio output is used to connect other power amplifiers, so as to expand the power; a MIC interface is used to

realize local paging and so on.

1.2 Performance features

The IP speaker with the integrated design of networked terminal processor and high fidelity speaker.

Redundant design of dual network interface, can work across the network segments.

It can be coupled at any place with access to network.

It has MP3 decoding play function.

It supports maximum 48kHz sampling rate 16bit digital audio bit stream decoding.

2×25W or 1×50W high fidelity digital power amplifier is built in with low power consumption

settings.

It can play the background music, emergency paging, and alarm signal and so on from the system host

machine.

It has a way auxiliary audio input port, a way auxiliary audio output port, a way MIC input port, a way

EMC emergency output port and 1-way short circuit output.

The local output volume and local playing state are controllable.

Signal state LED indication, working state and information change digital display.

It can be controlled by the infrared remote controller.

The source priority and priority depth of the network source, local line source, and local MIC source

can be set freely through the network.

II. Introduction of functions

2.1 Rear panel

* * Network PA System

Network PA System MAG6463

1 Network interface (LAN1/LAN2)

Dual network design, connecting the network switch

2 Color screen on-demand terminal connector

Connect the color screen on-demand terminal connector with 8 core cable; The connection description please

refer to the manual of on-demand terminal

3 MIC interface

Connect the MIC to realize the local paging

4 Auxiliary output interface (AUX OUT)

Connect with the high power amplifier, so as to expand the terminal power.

5 Auxiliary input interface (AUX IN)

Expand the local audio source input, and can connect local DVD \ radio and other left and right sound channel

output.

6 POWER Switch

Press the "I" to open the power supply;

Bounce the "I" to power off

7 RST Auxiliary Upgrade Key

If the network upgrade crashes, press and hold the auxiliary upgrade key when the power is off, then turn on

the power and release the key after 5 seconds, so as to re-upgrade.

8 100V Audio Input Interface (not opened to the machine)

100V audio signal connected with the third party system power amplifier.

* * Network PA System

Network PA System MAG6463

9 Power Amplifier Output Port (Speaker)

2×25W digital power amplifiers are built in the machine, and the power of the output port is 25W. It is used

to connect 1 constant resistance (4Ω) sound box.

10 AC 220v power cord

Working power supply

* * Network PA System

Network PA System MAG6463

III. Connection legend

3.1 Schematic diagram of application of MAG6463 in the system

Instruction:

1. Only the schematic description for connection of rough application of MAG6463 speaker is made in the

above figure. For connection of the whole system, please refer to operation instructions for the networked

control host.

2. It is illustrated by examples in the above figure. For specific connections, please refer to the schematic

diagram of system connection.

3. MAG6463 must be connected in the system through the network switch, and the corresponding address shall

be arranged for connection with the host machine.

3.2 Schematic diagram of connection of interface of MAG6463

Except for playing the program of host machine broadcast, the machine is also provided with a way auxiliary

input and a way auxiliary output, so as to connect other audio sources and power amplifiers. The customized

以太网

Other equipment of the network

broadcasting system

Network

broadcasting system

Control host of the network

broadcasting system

Terminal

POWER

OFF ON

USB

NETWORK PUBLIC ADDRESS CENTRE

EMC MIC

FULL ALARMING

COMPACT DISC DRIVER

Table des matières

Autres manuels DSPPA Intervenants

DSPPA

DSPPA DSP406 Manuel utilisateur

DSPPA

DSPPA MAG6368 Manuel utilisateur

DSPPA

DSPPA DSP207 Manuel utilisateur

DSPPA

DSPPA PoE6311 Manuel utilisateur

DSPPA

DSPPA DSP118 Manuel utilisateur

DSPPA

DSPPA DSP168HD Manuel utilisateur

DSPPA

DSPPA DSP8062 Manuel utilisateur

DSPPA

DSPPA MAG6378 Manuel utilisateur

DSPPA

DSPPA DSP154H Manuel utilisateur

DSPPA

DSPPA FP-808 Manuel utilisateur

DSPPA

DSPPA POE6463B Manuel utilisateur

DSPPA

DSPPA PoE255 Manuel utilisateur

DSPPA

DSPPA DSP406 Manuel utilisateur

DSPPA

DSPPA DSP2612B Manuel utilisateur

DSPPA

DSPPA MAG6182II Manuel utilisateur

DSPPA

DSPPA DSP1502 Manuel utilisateur

DSPPA

DSPPA AUX166A Manuel utilisateur

DSPPA

DSPPA DSP304H Manuel utilisateur

DSPPA

DSPPA MAG6364M Manuel utilisateur

DSPPA

DSPPA MAG6311 Manuel utilisateur

DSPPA

DSPPA DSP364 Manuel utilisateur

DSPPA

DSPPA DSP6011 Manuel utilisateur

DSPPA

DSPPA DSP1501 Manuel utilisateur

DSPPA

DSPPA MP30W Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur