DRAX REDON RX9200 Manuel utilisateur
Be sure to read the manual before using the product in order to use safely and
correctly. Please keep user manual at a place to be available easily.
USER’S MANUAL
RX9300 / RX9200 Series
V1.3
1. GETTING STARTED
2. INSTALLATION
- PRECAUTIONS
- PART NAME
- HOW TO MAKE INSTALLATION
- GROUNDING INSTRUCTIONS
- CENTERING THE BELT
3. USING THE TREADMILL
- DISPLAY CONSOLE
- USING WORKOUTS
4. SPECIFICATIONS
5. MAINTENANCE
6. LIMITED WARRANTY
2
3
3
3
4
5
6
7
7
11
15
16
19
CONTENTS
1 GETTING STARTED
[IMPORTANT SAFETY INSTRUCTIONS]
Read all instruction before using the treadmill.
To reduce the risk of electrical shock. Always unplug this REDON
before cleaning or attempting any maintenance activity.
Danger
•
To reduce the risk of burns, fire, electric shock or injury, it is imperative to connect each product
to a properly grounded electrical outlet.
• To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.
•
Never operate a REDON if it has damaged power cord or electrical plug, or if is has been dropped,
damaged, or even partially immersed in water. Contact DRAX INC. Customer Support Services.
• Position this product so the power cord plug is accessible the the user.
•
Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord
or use the cord as a handle. Do not run the power cord on the floor under or along the side of
the treadmill.
•
If the electrical supply cord is damaged it must be replaced by the manufacturer, an authorized
service agent, or a similarly qualified person to avoid a hazard.
• Do not use this product in areas where aerosol spray products are being used or where oxygen
is being administered. Such substances create the danger of combustion and explosion.
• Always follow the console instructions for proper operation.
• Close supervision is necessary when used by, on, or near children, invalids or disabled persons.
• Do not this product outdoors, near swimming pools or in areas of high humidity.
• Never operate a REDON with the air openings blocked. Keep air openings free of lint, hair or any
obstructing material.
•
Never insert objects into any opening in this product. If an object should drop inside, turn off the
power, unplug the power cord from the outlet and carefully retrieve it.
• If the item cannot be reached, contact DRAX INC. Customer Support Services.
• Never place liquids of any type directly on the unit, except in an accessory tray or holder.
• Containers with lids are recommended.
• Wear shoes with rubber or high-traction soles. Do not use shoes with heels. Leather soles.
• Cleats or spikes. Make sure no stones are embedded in the soles.
• Keep all loose clothing, shoelaces and towels away from moving parts.
• Do not use this product in bare feet.
• Donot reach into or underneath the unit, or tip it on its side during operation.
•
Keep the area 2 meters by 1meter behind the treadmill clear of any obstructions, including walls,
furniture, and other equipment.
• Handrails may be held to enhance stability as needed, but are not for continuous use.
• Never mount or dismount the treadmill while the running belt is moving. Use the handrails
whenever additional stability is required. In case of an emergency, such as tripping, the hand-
rails should be grabed and the user should place his/her feet on the side platforms.
• Never walk or jog backwards on the treadmill.
• Use this appliance only forits intended use as described in this manual. Do not use attachments
not recommended by the manufacturer.
• There shall be a safe space of 2,000 × 1,000 mm (78.7” x 39.4”) behind the treadmill.
Warning
REDON
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
REDON
2
2 INSTALLATION
PRECAUTIONS _
The treadmill should be installed on a flat place with even leveling. If the treadmill is placed on an
unstavle pad or carpet, the belt may not be correctly arranged, and will be a cause to be overloaded.
In such a case, be sure to use the machine after you place the machine on a firm and flat object such
as plywood. Make sure that enought space is secured in front of the treadmill so that you may find it
easy to operate the power switch.
Please be sure to use a standardized plug which should be grounded.
PART NAME _
① Console Display
④ Handrail
⑦ Motor Cover
⑩ Base
⑬ Running Belt
② Touch Heart Rate Sensor
⑤ Emergency Key
⑧ Incline
⑪ Belt Adjusting Screw
③ Front Handrail
⑥ Support
⑨ Foot
⑫ Foot Rail
3
HOW TO MAKE INSTALLATION _
Please set a suitable place to install REDON according to the following requirements :
(1) A place where the base is flat. (if the base is not even condition, it may cause vibrations)
(2) Please place the power cord at a secluded place.
(3) Open the motor cover, insert the support and lock with M12 screw.
Please throw the cable to support as follow pictures.
(5)
Assemble front handrail including Emergency Key and Touch Heart Rate Sensor. Pull out cables
from left Support throughout the left Handrail.
(6) Assemble console back panel by fixing Console Support to Handrail. Cover and assemble console
front panel.
Cation :
Before cover console front panel connect Emergency Key cable and Touch Heart Rate
Sensor cable from handrail to console board.
(7) Turn the power On and check treadmill operation.
(4)
Assemble the handrail with support. Pull out the main cable from right support throughout the handrail.
4
REDON
GROUNDING INSTRUCTIONS _
This product must be grounded. If it should malfunctions or breaks down, proper grounding provides
a path of least resistance for the electric current, which reduces the risk of shock to anyone touching
or using the equipment. Each unit is equipped with an electrical cord, which includes an equipment
grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been
properly installed and grounded in accordance with all local codes and ordinances.
A risk of electrical shock may result from improper connection of
the equipment-grounding conductor. Check with a qualified elec-
trician if in doubt as to proper grounding technique. DO NOT modify the plug provided with the
product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a circuit having an nominal rating of 240 volts and is factory equipped
with a specific cord and plug to permit connection to a proper electric circuit. Make sure that the
product is connected to an outlet having the same configuration as the plug. No adapter should
be used with this product. If the product must be reconnected for use one a different type of
electric circuit, the reconnection must be made by qualified service personnel.
Danger
5
CENTERING THE BELT _
After the treadmill has been installed and leveled, the belt must be checked to confirm proper tracking.
First, plug the power cord into an appropriate outlet and turn the treadmill ON. The first person stands
on the sides of the treadmill and straddles the belt, not standing on it at this time. Press the Quick Start
key and increase the speed to 4km/h using the Speed up-arrow.
While the treadmill is running, if the striding belt moves to the right, the second person turns the right
tension bolt 1/4 turn clockwise and then turns the left tension bolt 1/4 turn counter-clock-wise(see
figure). This sets the striding belt tracking back to center of roller. If the striding belt moves to the left,
turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counterclock-
wise to start striding belt tracking back to center of roller. Repeat adjustments until striding belt appears
centered. Allow machine to continue running for several minutes to observed if tracking remains stabilized.
NOTE :
Do not exceed one full turn of the adjusting
screws in either direction. If after one full
turn the belt does not track properly, con-
tact Customer Support Services.
6
REDON
3 USING THE TREADMILL
DISPLAY CONSOLE _
The computerized display console is easy to use. It allows an individual to follow the progress of a workout.
The on-board computer allows a workout to be tailored to individual fitness capabilities and goals while
providing a unique means of measuring fitness improvement from one workout to the next.
SPEED SYNC EXCTING MODE
SPEED SYNC COMFORTABLE MODE
①
FND Window
③ Focus Key
⑤ Speed
⑦ Time
⑨ Pause
⑪ Start
⑬ Workout Mode
② Message Window
④ Key Pad
⑥ Incline
⑧ Cool Down
⑩ Stop
⑫ Speed Sync
7
① FND WINDOW
Displays a matrix of LED lights displaying the current position and the upcoming terrain. While striding,
the light columns move across the screen from right to left. The higher the column of lights, the greater
the incline and workout intensity.
② MESSAGE WINDOW
Provides simple step-by-step instructions motivational messages.
Display : INCLINE TIME HEART RATE CALORIES DISTANCE SPEED.
③ FOCUS KEY
- INCLINE FOCUS KEY :
Pressing this key will display the present incline in Workout Profile Window
and easy to see the present incline.
- TIME FOCUS KEY : During workout, pressing this key will display the workout time or remained
time in Workout Profile Window and easy to see the present incline. Pressing this key when stop
the Time Goal Workout start.
- HEART RATE FOCUS KEY :
Pressing this key will display user’s heart rate in Workout Profile Window
if heartrate detected and easy to see the user’s Heart Rate.
- CALORIES FOCUS KEY :
During workout, pressing this key will display the workout calories or re-
mained calories in Workout Profile Window and easy to see the Calories. Pressing this key when
stop the Calories Goal Workout start.
- DISTANCE FOCUS KEY :
During workout pressing this key will display the workout distance or re-
mained distance in Workout Profile Window and easy to see the present Distance. Pressing this
key when stop the Distance Goal Workout start.
- SPEED FOCUS KEY : Pressing this key will display the present speed in Workout Profile Window
and easy to see the present Speed.
④ KEY PAD
-
Numeric keys : Use these keys to enter exercise time, difficulty level,
belt speed, weight, distance, goal selection and target heart rate.
-
Clear Key : Press this key once to clear data not yet entered. Press
twice in succession while programming to reset unit and beging the
programming sequence again.
- Enter Key : This key is used to enter the data displayed in the
message center.
8
REDON
⑤ SPEED
Press these keys to increase or decrease the belt speed.
The adjacent window above keys displays the input. In addi-
tion, any of these keys may be pressed to begin a workout
or programming.
⑥ INCLINE
Press these keys to increase or decrease the incline of the
treadmill deck. The adjacent window above keys displays
the input. In Auto Incline Change mode, pressing ▲ or ▼
will continuously incline increase or decrease and pressing
same key one more will stop incline.
⑦ TIME
Press these keys to increase or decrease the workout time.
The adjacent window above the keys displays the input. In
addition, any of these keys may be pressed to begin a work-
out or programming.
⑧ COOL DOWN
Begins an automatically customized cool-down protocol.
⑨ PAUSE
Stops the belt and holds the current workout until resumed
when the Enter key is pressed or the maximum pause duration
is reached.
⑩ STOP
Pressing this key will stop the striding belt and end the cur-
rent workout.
⑪ START
Allows user to quickly enter a manual workout with the
press of one key.
9
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels DRAX tapis roulant
Manuels tapis roulant populaires d'autres marques
Smooth Fitness
Smooth Fitness EVO 3i Manuel utilisateur
NordicTrack
NordicTrack NETL81810.0 Manuel utilisateur
Schwinn
Schwinn 830/Journey 8.0 Manuel utilisateur
Keys Fitness
Keys Fitness HealthTrainer HT-740T Manuel utilisateur
Spirit
Spirit XT8 Manuel utilisateur
NordicTrack
NordicTrack T 14.0 Treadmill Manuel utilisateur