DRAX REDON NR30 Manuel utilisateur
Be sure to read the manual before using the product in order to use safely and
correctly. Please keep user manual at a place to be available easily.
1
USER’S MANUAL NR30/NR25/NR20
V1.2E
EU
1. GETTING STARTED
2. INSTALLATION
- PRECAUTIONS
- PART NAME
- HOW TO MAKE INSTALLATION
- HOW TO CHECK OPERATION
- ADJUSTMENT OF BELT-TENSION
3. HOW TO USE
- DETAIL OF DISPLAY CONSOLE
- DISPLAY AND CONSOLE
- SPEEDSYNC TYPE
- NORMAL TYPE
4. FUNCTION OF PROGRAM
5. FEATURES BY MODEL
6. MAINTENANCE
7. LIMITED WARRANTY
2
3
3
3
4
6
7
8
8
9
9
11
12
17
19
22
CONTENTS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
NEW REDON
1 GETTING STARTED
SAFETY INSTRUCTIONS _
Please read and fully understand this user manual prior to using this machine.
Please keep this manual in a safe and handy place for future reference.
Failure to adhere to the following could potentially void your warranty.
Always disconnect power supply when servicing/cleaning or during extended periods of non-operation
of this exercise equipment.
Do not attempt to disassemble this exercise equipment. Only authorized service providers may service
this equipment.
Do not operate this exercise equipment if damaged or if any abnormal noises are heard.
Please Contact DRAX INC. Customer Support Center for assistance.
• The owner of exercise equipment must inform all users of the safety instructions and correct operating
procedure for this exercise equipment.
• Always operate the exercise equipment in accordance with the supplied instructions.
• Always ensure that this exercise equipment is installed on flat level ground prior to operation.
• Always ensure that this exercise equipment installed in a low humidity and low dust environment.
• Do not operate this exercise equipment prior to proper installation.
(Please refer to installation instructions)
• Always ensure that children and pets are kept off this exercise equipment.
• The maximum user weight supported by the exercise equipment is 180kg.(400lbs)
• Never allow more than one person on this exercise equipment at any one time.
• Always wear appropriate clothing and footwear when using this exercise equipment.
Do not wear baggy loose clothes.
• Always ensure that the machines power cord is neatly wrapped up and protected from being
walked on, pinched or damaged in anyway. A damaged power cord has the potential to cause
an electrical shock or fire.
• Do not remove the plug by pulling on the cord and do not handle the plug with wet hands.
This could result in electric shock, fire or damage to the cord and equipment.
• Do not allow uncontained food or drink on or near this exercise equipment.
• Regularly inspect this exercise equipment to ensure safe operation.
• There shall be a safe space of 2,000 × 1,000 mm (78.7” x 39.4”) behind the Treadmill.
Warning
Caution
2
3
2 INSTALLATION
PRECAUTIONS _
(1) Always ensure that this exercise equipment is installed on flat level ground and feet are leveled and
locked into place prior to operation.
(2) Always only use the grounding type power cord that is supplied with the exercise equipment.
(3) Always allow enough space to access the power switch located on the front of the treadmill.
① Display
④ Touch Type Heartrate Sensor
⑦ Support-Column
⑩ Foot
② Operation Panel
⑤ Emergency STOP Key
⑧ Motor room and Motor cover
⑪ Running Belt
③ USB & Earphone
⑥ Console
⑨ Incline
PART NAME _
NEW REDON
HOW TO MAKE INSTALLATION _
(1) Unpack the exercise machine from the transport packaging and remove all rubbish.
(2) Lay all of the components out in a clear manner and check that you have all of the components shown
below, if any of the components are missing please contact DRAX INC. Customer Support Center.
(3) Remove the motor cover from the treadmill base.
(4) Insert the communication cables into right hand side support column. Loosely attach the support
columns to the base frame using the 6x M12 bolts supplied (see Fig.1).
(5) Loosely attach the upper frame assembly to the top of the support columns using the 6x M8 bolts
supplied (see Fig.2).
Fig.1 Assembly between “Main Frame ASSY” and “ Support Column”
4
Components
- Main Frame ASSY
- Upper Frame ASSY
- Console Display ASSY
- Support Column
- Bolt and Nut Sets
- User’s Manual
Motoer
Cover
Support
Column
MAIN-Frame
ASSY
Upper Frame
ASSY
Cable Insertion
point
Console Display ASSY
Upper Frame ASSY
Support Column
Motor Cover
Main Frame ASSY
5
(6) Evenly tighten all of the M12 and M8 bolts, making sure that everything is lined up correctly and all
cables are free of any impingements.
Note: Recommended torque settings.
- M12 Bolt : 30 Nm
- M8 Bolt : 20 Nm
(8) Remove the rear cover from the console by unscrewing the 5 Philips head screws (see Fig.3).
(9) Fit the console main display unit to the treadmill using the 4x M8 bolts supplied (see Fig.4).
Be sure to check that the console guide lugs (Fig.5) are lined up before tightening the mounting bolts.
(10) Connect all communication/power/TV cables to the console.
※ Attention : Before connecting any cables ensure that the treadmill is disconnected from
mains power.
(11) Re-fit the console rear cover using the 5x Philips head screws.
(12) Re-fit treadmill motor bay cover.
Rear Cover
Front Cover
Console guide rib(2point)
Fig.2 Assembly “Front Cover” and “Rear Cover”
(13) Plug the tr eadmill in and power it up.
NOTE : Do not stand on the treadmill during power up phase.
Reference : Cable-connection depends upon the treadmill model
NEW REDON
HOW TO CHECK OPERATION _
(1) Plug the power cord into an appropriate outlet and turn the treadmill ON.
(2) Once the treadmill has gone through its initial boot up phase, you can run the treadmill belt and
check the belt alignment and tension(see 2-5 Adjustment of belt tension).
(3) Once belt adjustment is complete, you can start testing all functions and features (for more details,
see Page 8 “How to use”). During this testing phase listen for any abnormal noises or vibrations.
(4) If any problems are found during the testing phase, please contact DRAX INC. Customer Support
Center.
(5) During operating the treadmill, check whether abnormal noise/vibration occurred or not.
If abnormal noise/vibration is detected, don’t operate the treadmill.
Contact DRAX INC. Customer Support Center.
(6) Check whether running belt is centered or not between the left/right roller-side. If not, adjust the
belt-centering according to “Adjustment of Belt-Tension” instruction.
6
DRAX Inc.
Address : 26, Jeonpa-ro 62Beon-gil, Manan-gu, Anyang-si, Gyeonggi-do, 14086, KOREA
Tel : +82-31-459-8530 Fax : +82-31-459-8531
E-mail : drax@draxfit.com
ADJUSTMENT OF BELT-TENSION _
(1) Run the treadmill belt up to 5km/h for approximately 1 minute, watch the belt alignment at the
rear roller. The belt should sit in the middle of the rear roller.
(2) If the belt is tracking closer to the right hand side of the machine use an 8mm Allen key wrench and
tighten the right hand side roller adjustment bolt (see pic below) by ¼ of a turn in the clockwise direction.
Then monitor the belt running for another minute. Keep repeating this procedure until the belt is
centered on the rear roller.
(3) If the belt is tracking closer to the left hand side of the machine use an 8mm Allen key wrench and
tighten the left hand side roller adjustment bolt (see pic below) by ¼ of a turn in the clockwise direction.
Then monitor the belt running for another minute. Keep repeating this procedure until the belt is
centered on the rear roller.
(4) If the belt is running in the centre of the roller but slipping under the foot when walking simply tighten
both right and left hand roller adjustment bolts ¼ of a turn in the clockwise direction. Repeat this
procedure until the belt stops slipping. If slipping continues please contact customer support.
NOTE : To access the roller adjustment bolts you will have to slide the Allen key wrench through
the access hole in the end caps (see picture below).
7
NOTE :
Do not over tension the running belt.
If the belt continues to slip after multiple
attempts to tension it, please contact
DRAX INC.
Customer Support Center.
Adjustment of
Belt-Tension
NEW REDON
3 HOW TO USE
DETAIL OF DISPLAY CONSOLE _
① START / STOP Button
Used to start and stop the exercise program.
② Emergency STOP Key
The emergency stop lanyard must be securely connected/clipped to the user prior to starting the
treadmill. In the case of a trip/fall or other emergency, the emergency magnet will be pulled from
the machine and all of the machines operations will be stopped. To continue the workout simply
replace the emergency stop magnet on to the machine and restart the workout.
③ Incline control lever
Used to incline or decline the treadmill gradient.
④ Speed control lever
Used to increase or decrease the speed of the running belt.
⑤ Touch type Heartrate Sensor
When the user holds both right hand and left hand heart rate sensors simultaneously the users heart
rate will be displayed on the treadmill screen. Note: the displayed heart rate is only a guide and not
to be relied on as a medical instrument.
8
① Start/Stop Button
④ Speed control lever
② Emergency STOP Key
⑤ Touch type Heartrate Sensor
③ Incline control lever
9
SPEEDSYNC TYPE _
① Main Screen
Displays TV / Internet / Screen-mirroring / Workout Programs etc.
② Emergency Display
Displays critical workout metrics like, Time / Distance / Level / Calories / Heart rate etc.
③ USB
Multi media port : Plug a USB flash drive in and enjoy watching your very own movies, music videos,
or photos on the machines large display screen. Supports USB 2.0
④ Earphone Jack
Plug your headphones or earphones in to listen to what ever you are watching on the screen.
⑤ Program Button
Program : Select a preset exercise programs.
Cool Down : Instantly starts the cool down program regardless of where you are at in your workout.
Pause : Pauses the workout.
① Main Screen
④ Earphone Jack
⑦ SpeedSYNC
② Exercise Display
⑤ Program Button
⑧ Quick Speed Button
③ USB
⑥ Keypad
Ce manuel convient aux modèles suivants
29
Table des matières
Autres manuels DRAX tapis roulant
Manuels tapis roulant populaires d'autres marques
Smooth Fitness
Smooth Fitness EVO 3i Manuel utilisateur
NordicTrack
NordicTrack NETL81810.0 Manuel utilisateur
Schwinn
Schwinn 830/Journey 8.0 Manuel utilisateur
Keys Fitness
Keys Fitness HealthTrainer HT-740T Manuel utilisateur
Spirit
Spirit XT8 Manuel utilisateur
NordicTrack
NordicTrack T 14.0 Treadmill Manuel utilisateur