Dragino LG01v2 Manuel utilisateur

LG01v2 -- LoRa Gateway User Manual

last modiﬁed by Kilight Cao

on 2023/06/20 10:40

Table of Contents

1. Introduction .......................................................................................................................................................................... 4

1.1 What is LG01v2 ............................................................................................................................................................. 4

5.2.5 Plot data chart in LG01v2 .................................................................................................................................... 28

6. How users can access LG01v2 using serial USB ....................................................................................................... 30

7. OTA System Update ....................................................................................................................................................... 33

8. FAQ .................................................................................................................................................................................... 33

8.1How does LG01v2 communicate with Lora shield (LoRa.h) .................................................................................. 33

8.2 How does LG01v2 communicate with Heltec LoRa Node ..................................................................................... 36

8.3 How does LG01v2 communicate with LoRaWAN node ........................................................................................ 39

9. Trouble Shooting .............................................................................................................................................................. 43

9.1 Fallback IP does not work, how can users check ................................................................................................. 43

10. Supports .......................................................................................................................................................................... 44

12. Order Info ........................................................................................................................................................................ 45

13. Manufacturer Info ........................................................................................................................................................... 45

14. FCC Warning .................................................................................................................................................................. 45



Table of Contents：

•1. Introduction

•1.1 What is LG01v2

•1.2 Speciﬁcations

•1.3 Features

•1.4 Block Diagram

•1.5LED Indicators

•1.6 Button Intruction

•2. Quick Start

•2.1 Access and Conﬁgure LG01-v2

•2.1.1 Find IP address of LG01-v2

•Method 1: Connect via Ethernet with DHCP IP from the router

•Method 2: Connect via LG01v2 Fallback IP

•Method 3: Connect via WiFi with DHCP IP from the router

•2.1.2 Access Conﬁgure Web UI

•3. Web Conﬁgure Pages

•3.1 Home

•3.2 Network Settings

•3.2.1 Network --> WiFi

•3.4.2 Network --> System Status

•3.5 System

•3.5.1 System --> System Overview

•3.5.2System --> Backup/Restore

•3.5.3 System --> System General

•3.5.4 System --> Remoteit

•3.5.5 System --> Package Management

•4. Build in Server

•4.1 Application Server -- Node-Red

•5. How to conﬁgure the Lora Gateway

•5.1 Conﬁgure and Debug LoRa wireless of LG01v2

•5.2 Example: LG01v2

•5.2.1 Introduce for the example:

•5.2.2 Set Up LA66 Shield + UNO

•Set up LA66 Module

•Set up Arduino UNO

•1. Open Arduino IDE

•2. Open project

•3.Open the Serial Monitor to check the LA66 Shield data

•5.2.3 Set Up LG01v2

•5.2.4 Test result

•5.2.5 Plot data chart in LG01v2

•6. How users can access LG01v2 using serial USB

•7. OTA System Update

•8. FAQ

•8.1How does LG01v2 communicate with Lora shield (LoRa.h)

•8.2 How does LG01v2 communicate with Heltec LoRa Node

•8.3 How does LG01v2 communicate with LoRaWAN node

•9. Trouble Shooting

•9.1 Fallback IP does not work, how can users check

•10. Supports

•11. Reference

•12. Order Info

•13. Manufacturer Info

•14. FCC Warning

1. Introduction

1.1 What is LG01v2

The LG01v2 is anopen-source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an

IP network via WiFi , Ethernet or Cellular Network (via Optional 4G module). The LoRa wireless allows users to

send data and reach extremely long ranges at low data rates.

LG01v2 is specially design for peer to peer LoRaprotocol instead of LoRaWAN protocol. The LG01v2 use

single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.

LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on

it. It has 1.2Ghz Quad-Core CPU , 4GB eMMC storage and 512MB RAM for most application.

LG01v2 supports remote management. System Integrator can easy to remote monitor the gateway and

maintain it.

1.2 Speciﬁcations

Hardware System:

• CPU: Quad-core Cortex-A7 1.2Ghz

• RAM: 512MB

• eMMC: 4GB

Interface:

• 10M/100M RJ45 Ports x 1

• WiFi 802.11 b/g/n

Operating Condition:

• Work Temperature: -20 ~ 65°C

• Storage Temperature: -20 ~ 65°C

• Power Input: 5V, 2A, DC

1.3 Features

• Open Source Debian system

• Managed by Web GUI, SSH via WAN or WiFi

• Remote Management

• Auto-provisioning for batch deployment and management

• LoRa Gateway

• Built-in Node-Redlocal Application server

1.4 Block Diagram

1.5LED Indicators

LG01-V2 has totally four LEDs, They are:

# Power LED: This RED LED will be solid if the device is properly powered

# ETH LED: This RGB LED will blink GREEN when the ETH port is connecting

# SYS LED: This RGB LED will show diﬀerent colors in diﬀerent states:

# SOLID GREEN: The device is alive with a LoRaWAN server connection.

# BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b) Device

is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN

together

#SOLID RED: Device doesn't have an Internet connection.

# WIFI LED:This LED shows the WIFI interface connection status.

1.6 Button Intruction

LG01-V2 has a black toggle button, which is:

#Long press 4-5s :the gateway will reload the Network andInitialize wiﬁ conﬁguration

LED status: ETH LED will BLINKIND BULE Until the reload is ﬁnished.

# Long press more than 10s:the gateway will restore the factory settings.

LED status: ETH LED will SOLID BULE Until the restore is ﬁnished.

2. Quick Start

The LG01-V2 supports network access via Ethernet or Wi-Fi connection andruns without a network.

In most cases, the ﬁrst thing you need to do is make the LG01-v2 accessible to the network.

2.1 Access and Conﬁgure LG01-v2

2.1.1 Find IP address of LG01-v2

Method 1: Connect via Ethernet with DHCP IP from the router

Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the

router's management portal, you should be able to ﬁnd what IP address the router has assigned to the LG01-V2.

You can also use this IP to connect.

Method 2: Connect via LG01v2 Fallback IP

Steps to connect via fallback IP:

1. Connect the PC's Ethernet port to LG01v2's WAN port

2. Conﬁgure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252

Settings --> Network & Internet --> Ethernet --> Change advanced sharing options -->Double-

click"Ethernet" --> Internet Protocol Version 4 (TCP/IPv4)

As in the below photo:

Conﬁgure computer Ethernet port steps video:fallback ip.mp4

If you still can't access the LG01v2 fallback ip, follow this connection to debug :Trouble Shooting

3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.

Method 3: Connect via WiFi with DHCP IP from the router

Fill in the WiFi information by checking the box and clicking Save&Apply

Wi-Ficonﬁguration successful

2.1.2 Access Conﬁgure Web UI

Web Interface

Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)

http://IP_ADDRESS or http://172.31.255.254(Fallback IP)

You will see the login interface of LG01v2 as shown below.

The account details for Web Login are:

User Name: root

Password: dragino

3. Web Conﬁgure Pages

3.1 Home

Shows the system running status:

Autres manuels pour LG01v2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dragino Porte

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur