Dover Triton 9600 Series Manuel utilisateur

E*TRADE ADDENDUM
TO9600-SERIES
OPERATION MANUAL
VERSION 1.0
TDN 07103-00024 08/01
COPYRIGHT NOTICE
Copyright © 2001 Triton Systems , Inc. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
human or computer language, in any form, by any means whatsoever, without the express
written permission of Triton Systems, Inc.
CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION)
RETURN ADDRESS:
522 E. Railroad Street 21405 B Street
Long Beach, MS 39560 Long Beach, MS 39560
PHONE: (228) 868-1317
FAX: (228) 868-0437

Contents
SECTION 1 - INTRODUCTION............................................................................................................................ 1-1
WHAT’SIN THIS ADDENDUM ....................................................................................................................................... 1-2
MANAGEMENT FUNCTIONS .......................................................................................................................................... 1-2
CUSTOMER TRANSACTIONS ......................................................................................................................................... 1-2
JOURNAL ................................................................................................................................................................. 1-3
SECTION 2 - MANAGEMENT FUNCTIONS ....................................................................................................... 2-1
INTRODUCTION .......................................................................................................................................................... 2-2
NEW OR MODIFIED MANAGEMENT FUNCTIONS ............................................................................................................... 2-2
FUNCTION: TRANSACTION TYPE SETUP............................................................................................................ 2-3
FUNCTION: E*TRADE TRANSACTION TYPES ..................................................................................................... 2-4
FUNCTION: NON-E*TRADE TRANSACTION TYPES ............................................................................................ 2-5
FUNCTION: ACCOUNT TYPE SETUP.................................................................................................................... 2-6
FUNCTION: E*TRADE ACCOUNT TYPES ............................................................................................................. 2-7
FUNCTION: NON-E*TRADE ACCOUNT TYPES .................................................................................................... 2-8
FUNCTION: E*TRADE BINS ................................................................................................................................... 2-9
FUNCTION: O.A.R. SWITCH................................................................................................................................. 2-10
FUNCTION: TRITON CONNECT........................................................................................................................... 2-11
FUNCTION: T.O.T.C.C ........................................................................................................................................... 2-12
FUNCTION: SURCHARGE LOCATION / MESSAGE ............................................................................................ 2-15
SECTION 3 - CUSTOMER TRANSACTIONS...................................................................................................... 3-1
INTRODUCTION .......................................................................................................................................................... 3-2
CUSTOMER TRANSACTIONS ......................................................................................................................................... 3-2
FIGURE 3-1 - E*TRADE WITHDRAWAL TRANSACTION FLOW ....................................................................... 3-3
FIGURE 3-2 - E*TRADE TRANSFER TRANSACTION FLOW ............................................................................ 3-5
FIGURE 3-3 - E*TRADE BALANCE TRANSACTION FLOW............................................................................... 3-7
FIGURE 3-4 - NON-E*TRADE CUSTOMER TRANSACTION FLOW .................................................................. 3-9
SECTION 4 - JOURNAL ...................................................................................................................................... 4-1
JOURNAL ENTRIES .................................................................................................................................................... 4-2

SECTION 1
INTRODUCTION

TRITON SYSTEMS, INC.
E*TRADE ATM SOFTWARE - ADDENDUM
1-2
SECTION 1 - INTRODUCTION
WHAT’SIN THIS ADDENDUM
ThisAddendumtotheATMOperationsManualdescribesthenew
features offered by the E*TRADE OAR version of Triton ATM
software.
TheAddendumcontentsarespreadacrossthe following sections:
Section 1 - Introduction. This section gives a summary of the
new features offered by the E*TRADE OAR version of Triton ATM
software.
Section 2 - Management Functions. This section describes the
newconfigurationoptionsavailable in the E*TRADE OAR version
of Triton ATM software.
Section 3 - Customer Transactions. This section describes the
transactions available to customers of an ATM that is running the
E*TRADE version of Triton ATM software. Both E*TRADE and
non-E*TRADE transactions are described.
Section 4 - Journal. This section provides an example of a
transaction-type journal entry, and provides an extensive list of all
new transaction codes.
MANAGEMENT FUNCTIONS
New management functions enable you to selectively turn on or
turn off various account and transaction types for both E*TRADE
and Non-E*TRADE customers.
Also, a new T.O.T.C.C. (Terminal Originated Triton Connect Call)
feature enables you to establish a time at which the terminal will
automatically call out to a Triton Connect Host PC to retrieve any
pending commands or operations.
CUSTOMER TRANSACTIONS
The customer interface of the E*TRADE version of Triton ATM
software now offers a distinctive, E*TRADE-branded identity.
Two transaction-paths are available, depending upon the type of
ATM card used and the current configuration of the ATM. These
transaction-paths are:
1. E*TRADE Customer Transactions.
2. Non-E*TRADE Customer Transactions.
Terminal Hardware
Requirements
ThenewOARandT.O.T.C.C.features
requirethatthefollowinghardwarebe
installed in the terminal:
1. An Expanded Memory Card.
2. EPROM version 3.00 or higher.
OARandT.O.T.C.C.features arenot
supported unless the terminal
meets the above minimum
hardware requirements!

TRITON SYSTEMS, INC. 1-3
E*TRADE ATM SOFTWARE - ADDENDUM SECTION 1 - INTRODUCTION
E*TRADE customers using a qualifying ATM card will be offered
additional transaction options, which include the ability to withdraw
funds, check balances and transfer funds between E*TRADE
accounts.E*TRADEaccounts fall intotwocategories:1.)E*TRADE
bank or 2.) E*TRADE brokerage accounts.
Within each category of E*TRADE account, both primary and
secondary accounts are available. Transactions can be performed
onvariouscombinations ofprimaryorsecondary,bankorbrokerage
accounts.
Non-E*TRADE customers are offered the standard set of options
for withdrawal, balance inquiry and transfer of funds between non-
E*TRADE bank checking, savings and credit card accounts.
JOURNAL
Because of the large number of transactions that can now be
performed, additional transaction codes have been created to
represent these transactions in communication between the ATM
andthesponsoringhostprocessor system. These codes arestored
intheunit’selectronicjournalandareprintedoutonjournal reports.


SECTION 2
MANAGEMENT FUNCTIONS

TRITON SYSTEMS, INC.
E*TRADE ATM SOFTWARE - ADDENDUM
2-2
SECTION 2 - MANAGEMENT FUNCTIONS
INTRODUCTION
This section describes the new or revised Management Functions
in the E*TRADE version of ATM operating software.
NEW OR MODIFIED MANAGEMENT FUNCTIONS
A summary of changes to the Management Functions is provided
below:
TRANSACTION TYPES. This function has been split into areas
for E*TRADE and NON-E*TRADE customers. Options to turn ON
or OFF the availability of transaction types (Transfers and Balance
Inquiries) for E*TRADE specific accounts have been added.
ACCOUNT TYPES. This function has also been split into areas for
E*TRADEandNON-E*TRADEcustomers. New optionsenableyou
to turn ON or OFF the availability of account types that are only
offered to E*TRADE customers, such as Money Market and
Brokerage accounts.
E*TRADE BINS. This function enables the ATM to recognize
E*TRADE customer cards, using the BIN (Bank Identification
Number) stored on the card.
O.A.R. SWITCH. The O.A.R. (Open Account Relationship) Switch
enables you to turn ON or OFF the availability of E*TRADE
customer account and transaction type options.
T.O.T.C.C.. The T.O.T.C.C. (Terminal Originated Triton Connect
Calls) feature enables a terminal to call a Triton Connect PC on a
scheduled basis, during which any pending operations can be
performed.
SURCHARGE.TheSURCHARGELOCATIONANDSURCHARGE
MESSAGE functions have been modified from previous versions
of ATM software. The surcharge location setting is now fixed at
‘Beginning’and the surcharge location option has been removed
from Management Functions. The standard surcharge message
now reflects an E*TRADE branded appearance.

TRITON SYSTEMS, INC. 2-3
E*TRADE ATM SOFTWARE - ADDENDUM SECTION 2 - MANAGEMENT FUNCTIONS
FUNCTION: TRANSACTION TYPE SETUP
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select the TERMINAL CONFIGURATION option from the
MANAGEMENT FUNCTIONS screen.
2.) Select TRANSACTION TYPES.
DESCRIPTION:
This menu allows you to access transaction type configuration op-
tions for E*TRADE OR NON-E*TRADE customers.
ERROR CONDITIONS:
There are no error conditions directly associated with this function.

TRITON SYSTEMS, INC.
E*TRADE ATM SOFTWARE - ADDENDUM
2-4
SECTION 2 - MANAGEMENT FUNCTIONS
FUNCTION: E*TRADE TRANSACTION TYPES
FACTORY DEFAULT: ON
ACCESS INSTRUCTIONS:
1.) Select the TERMINAL CONFIGURATION option from the
MANAGEMENT FUNCTIONS screen.
2.) Select TRANSACTION TYPES.
3.) Select E*TRADE CUSTOMER.
DESCRIPTION:
This menu allows you to access transaction type configuration op-
tionsforE*TRADEcustomers.Theavailabletransactiontypesare:
TRANSFERS. This option enables transfers between the various
accounts available to E*TRADE customers (such as PRIMARY
ORSECONDARYBANK,BROKERAGE,CHECKINGorSAVINGS
accounts).
BALANCE INQUIRIES. This option enables the customer to ob-
tain the balance of various E*TRADE accounts.
When the transaction type is turned ON, the terminal will provide
that option to the customer. When the transaction type is turned
OFF, the selected transaction type will not be displayed to the cus-
tomer. The current state of the transaction type is shown as either
ON or OFF in the applicable button label on the display. Press the
button next to the label to toggle the state of the transaction type
between ON and OFF.
ERROR CONDITIONS:
There are no error conditions directly associated with this function.
Table des matières
Autres manuels Dover Terminal tactile
Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur

Amano
Amano MTX-15 Manuel utilisateur

FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco
Demco SP7 Manuel utilisateur












