Doro PhoneEasy 331ph Manuel utilisateur
PhoneEasy 331ph
2
3
5
4
1
1 Ringer indicator
2 Redial function
3 Volume control
4 Flash button/programming
5 Speed dial memories
English
1
English
Operation
Making a call
Regular dialling
1. Pick up the handset.
2. Enter the desired number.
Redial function
If a number was engaged or if you wish to redial the most recently
entered number, pick up the handset and press the redial button .
Memories
This telephone has 3 speed dial memories.
Once a number has been saved in a memory location, you only need to
press one button to make the call. A picture or symbol can be placed
under the transparent cover on the speed dial buttons so it is easy to see
who you are calling.
Dialling with speed dial
1. Pick up the handset and wait for the dialling tone.
2. Select required speed dial by pressing on the appropriate button.
Volume control
The handset earpiece volume may be adjusted during a call using .
Hearing loop
The handset has a built-in hearing loop for those who wish to use their
hearing aids while using the telephone. Select the T mode on your hearing
aid to enable this feature.
2
English
Settings
Connection
1. Connect the telephone cord to a network wall socket and to the T
socket on the back of the telephone.
2. Connect the curly cord to the handset and to the socket marked q
on the side of the telephone.
3. You will hear a click when the modular plug is correctly in place.
4. Set correct Flash button time to 100 (see Technical Information).
5. Lift the handset and listen for the dial tone.
Ring signal
The ringer volume can be adjusted using .
Memories
Saving speed dial numbers
1. Make sure that the R/Pswitch on the base of the telephone is set to P.
2. Lift the receiver and press P(R) (ignore anything you hear in the
earpiece).
3. Enter the phone number (up to 16 digits) using the keypad. Press P(R).
4. Select memory position by pressing the corresponding button.
5. Replace the handset. The number has now been saved.
Remember to return the R/Pswitch on the base of the telephone to the
Rposition when all the telephone numbers have been saved.
Press if you want a pause in the telephone number.
3
English
Technical Information
There are several switches on the base of the telephone.
These switches set technical parameters.
Flash button time (100/300/600)
100 is the standard setting for most countries.
300 for France/Portugal.
600 for New Zealand.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other phones.
If the problem is resolved, the fault is with some other equipment.
Test the equipment on a known working line (e.g. at a neighbour’s house).
If the equipment works there the fault is probably with your telephone
line. Please report this to your network operator.
If you are still experiencing difculties, contact the place of purchase.
Guarantee
This product is guaranteed for a period of 12 months from the date of
purchase. If you experience any problems please contact the place of
purchase. Proof of purchase is required for any service or support needed
during the guarantee period.
This guarantee shall not apply to a fault caused by an accident or a similar
incident or damage, liquid ingress, negligence, abnormal usage or any
other circumstances on the purchaser’s part. Furthermore, this guarantee
will not apply to any fault caused by a thunderstorm or any other voltage
uctuations.
As a matter of precaution, we recommend disconnecting the telephone
during a thunderstorm.
4
English
UK
If you cannot resolve the fault using the faultnder section, technical
support is available by email on tech@doro-uk.com or via a premium
rate telephone number: 0905 895 0854, calls cost 50 pence per minute
(prices correct at the time of publication). Further contact details are
available on our website: www.doro-uk.com
Alternatively you can write to:
Customer Services
Doro UK Ltd
1 High Street
Chalfont St Peter
Buckinghamshire
SL9 9QE
Declaration of conformity
Doro hereby declares that the product Doro PhoneEasy 331ph conforms
to the essential requirements and other regulations contained in the
directives 1999/5/EC (R&TTE), 2002/95/EC (ROHS).
A copy of the manufacturer’s declaration is available at
www.doro.com/dofc
English
Version 1.0
Autres manuels pour PhoneEasy 331ph
4
Table des matières
Autres manuels Doro Téléphone
Doro
Doro 914c Manuel utilisateur
Doro
Doro 909c Manuel utilisateur
Doro
Doro COMFORT 3000 Manuel utilisateur
Doro
Doro CONGRESS 200 Manuel utilisateur
Doro
Doro HearPlus 317c Manuel utilisateur
Doro
Doro AUB 200 Manuel utilisateur
Doro
Doro Magna 2005 Manuel utilisateur
Doro
Doro PHONE EASY Manuel utilisateur
Doro
Doro SECURE 350 Manuel utilisateur
Doro
Doro COMFORT 4005 Manuel utilisateur
Doro
Doro AFTI 45 Manuel utilisateur
Doro
Doro SeePlus 314ci Manuel utilisateur
Doro
Doro Kronos Manuel utilisateur
Doro
Doro PhoneEasy 331ph Manuel utilisateur
Doro
Doro 914c Manuel utilisateur
Doro
Doro HEARPLUS 313CI Manuel utilisateur
Doro
Doro MemoryPlus 319i ph Manuel utilisateur
Doro
Doro 916i cr Manuel utilisateur
Doro
Doro aub200h Manuel utilisateur
Doro
Doro PhoneEasy 311C Manuel utilisateur
