Dometic STIIC Manuel utilisateur

MARINE

CONTROL UNITS

WARNING

Cancer and Reproductive Harm

www.P65Warnings.ca.gov

STIIC

EN Smart Touch Integrated Intelligence

Control (STIIC)

Installation and Operation Manual........2

2EN

Contents STIIC Controller

1 Explanation of Symbols and Safety

Instructions ............................ 2

1.1 Recognize Safety Information .............2

1.2 Understand Signal Words................2

1.3 Supplemental Directives.................3

1.4 General Safety Messages ................3

2 General Information ..................... 3

2.1 STIIC PLC LCD Display...................4

2.2 STIIC PLC Touchscreen Display ...........4

2.3 Inputs and Outputs .....................5

2.4 STIIC MODBUS Address Layout ...........6

3 Intended Use ........................... 6

4 Specifications .......................... 7

5 Wiring Diagram......................... 8

6 Installation and Setup................... 10

6.1 Making Terminal Connections in the

Electric Box ..........................10

6.2 Connecting the Touchscreen ............10

6.3 Configuring the STIIC PLC............... 11

7 Operation............................. 15

7.1 Accessing a Device Type................15

7.2 Managing an Air Conditioning Device.....15

7.3 Managing a Refrigeration Device .........17

7.4 Managing an Eskimo Ice Device..........18

7.5 Managing a FAMU or SWV Device........18

7.6 Managing a Reverse Osmosis Device .....19

8 Alarms ............................... 21

8.1 Using the Touchscreen to View Alarms ....21

8.2 Using the LCD Display to View Alarms .....21

9 Disposal ..............................22

10 Warranty Information................... 22

10.1 United States and Canada ..............22

10.2 All Other Regions .....................22

Contents

Service Center & Dealer Locations

Visit: www.dometic.com

Read these instructions carefully. These instructions

MUST stay with this product.

1 Explanation of Symbols and

Safety Instructions

This manual has safety information and instructions to

help you eliminate or reduce the risk of accidents and

injuries.

1.1 Recognize Safety Information

This is the safety alert symbol. It is used to alert

you to potential physical injury hazards. Obey all

safety messages that follow this symbol to avoid

possible injury or death.

1.2 Understand Signal Words

A signal word will identify safety messages and property

damage messages, and also will indicate the degree or

level of hazard seriousness.

DANGER!

Indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING

Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION

Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE: Used to address practices not related to

physical injury.

IIndicates additional information that is not related

to physical injury.

STIIC Controller General Information

1.3 Supplemental Directives

To reduce the risk of accidents and injuries, please

observe the following directives before proceeding to

install or operate this appliance:

• Read and follow all safety information and

instructions.

• Read and understand these instructions before

installing or operating this product.

• The installation must comply with all applicable local

or national codes, including the latest edition of the

following standards:

U.S.A.

– American Boat and Yacht Council (ABYC)

– ANSI/NFPA70, National Electrical Code (NEC)

1.4 General Safety Messages

WARNING: ELECTRICAL SHOCK, FIRE, AND/

OR EXPLOSION HAZARD. Failure to obey the

following warnings could result in death or

serious injury:

• Use only Dometic replacement parts and

components that are speciﬁcally approved for use

with the appliance.

• Avoid improper installation, adjustment, alterations,

service, or maintenance of the appliance. Service and

maintenance must be done by a qualiﬁed service

person only.

• Do not modify this product in any way. Modiﬁcation

can be extremely hazardous.

• Use care when diagnosing and/or adjusting

components on a powered unit.

2 General Information

The Dometic STIIC Programmable Logic Controller

(PLC) provides a plug and play networking solution

for Dometic products. The user-friendly soware

connects a vessel’s Dometic devices and systems, like

air conditioning, water makers, ice makers, refrigeration

systems, and shipwide ventilation systems, to the

STIIC PLC. This technology allows the user to monitor,

manage, and troubleshoot the vessel’s marine comfort

systems from anywhere in the world, using a mobile

device or the Internet.

This is a MODBUS and CANBUS networked system.

The STIIC PLC is designed to work with unit controllers,

not to replace them. While the STIIC PLC allows you

to monitor and perform basic actions for the devices

enabled in the system, any in-depth diagnostics must be

done through the individual device or system.

IThe images used in this document are for reference

purposes only. Components and component

locations may vary according to speciﬁc product

models. Measurements may vary ±0.38 in.

(10 mm).

4EN

General Information STIIC Controller

2.1 STIIC PLC LCD Display

The STIIC PLC has an integrated LCD display with six

buttons for moving through the menus. This section

describes the LCD display buttons.

q r

ww t

eee y

1 LCD Display Buttons

qAlarm rScroll Up

wProgram tEnter

eEscape yScroll Down

No. Button Description

qAlarm Press the button when it is ﬂashing red

to display the active alarm screen. See

“Using the LCD Display to View Alarms”

on page 21.

wProgram Press this button to display the system

menus. Use the scroll buttons to step

through the options. Tap the Enter button

to select an option.

eEscape Press this button to exit the current screen

and return to the previous screen.

rScroll Up Press this button to step through available

menu options, change values in ﬁelds,

and move through pages on the screen.

tEnter Press this button to conﬁrm menu option

selections and saves changes.

yScroll

Down

Press this button to step through available

menu options, change values in ﬁelds,

and move through pages on the screen.

2.2 STIIC PLC Touchscreen Display

This section describes the buttons on the touchscreen

display.

q w er t y

2 Touchscreen Display

qSTIIC PLC

Conﬁguration

rEskimo Ice

Systems

wAir Conditioning tFAMU & SWV

eRefrigeration yReverse Osmosis

No. Button Description

qSTIIC

Conﬁguration

Tap the button to open the

conﬁguration menus used for:

• Enabling/disabling devices

• Technical support monitoring

through a VNC (Virtual Network

Computing) server

• Naming room controls and KRAs

(KRA series condensing units)

• Viewing the soware version

See “Installation and Setup” on

page 10.

wAir

Conditioning

Tap the button to open the main page

for chiller and room control monitoring

and control. See “Managing an Air

Conditioning Device” on page 15.

eRefrigeration Tap the button to open the main page

for monitoring and controlling the KRA

coolers and freezers on a vessel. See

“Managing a Refrigeration Device” on

page 17.

rEskimo Ice

Systems

Tap the button to open the main page

for monitoring and controlling up to

three Dometic Eskimo ice makers.

tFAMU & SWV Tap the button to open the main

page for monitoring and controlling

the FAMU (Fresh Air Make-up Unit)

and the SWV (Shipwide Ventilation)

system.

yReverse

Osmosis

Tap the button to open the main

screen for monitoring and controlling

the XTC SeaXchange , ZTC Spotzero,

and XZ combination system.

STIIC Controller General Information

2.3 Inputs and Outputs

The STIIC PLC allows you to connect diﬀerent Dometic

devices and has outputs to display the information

received by the devices. Figure 3 illustrates the STIIC PLC

I/O layout.

3 STIIC PLC I/O Layout

2.3.1 PLC Inputs

The PLC Input Table describes the inputs for the

STIIC PLC.

IIf a temperature sensor is defective or not

connected, the STIIC PLC generates an alarm for

that sensor.

PLC Input Table

Input I/O# Description Port

Conﬁguration

MBM_FB2 J26 Connection

port for Dometic

devices to

communicate

with the STIIC PLC

•Baudrate: 19200

•Data length: 8

•Stop bits: 1

•Parity: None

6EN

Intended Use STIIC Controller

2.3.2 PLC Outputs

The PLC Output Table describes the outputs for the

STIIC PLC.

IIf a temperature sensor is defective or not connected,

the STIIC PLC generates an alarm for that sensor.

PLC Output Table

Output I/O # Description Port

Conﬁguration

Touch_

pLAN

J11 Connection

to the

Touchscreen

•Baudrate: 3840

•Data length: 8

•Stop bits: 1

•Parity: None

MODBUS

TCP/IP

ETH MODBUS

TCP/IP slave

connection

Port: 502

MODBUS

slave

J25 MODBUS

RTU slave

connection

•Baudrate: 3840

•Data length: 8

•Stop bits: 1

•Parity: None

MODBUS

slave

Fieldbus

Card MODBUS

RTU slave

connection

•Baudrate: 19200

•Data length: 8

•Stop bits: 2

•Parity: None

MODBUS

slave

BMS

Card MODBUS

RTU slave

connection

•Baudrate: 19200

•Data length: 8

•Stop bits: 1

•Parity: None

2.4 STIIC MODBUS Address Layout

The STIIC MODBUS Address Layout Table lists the

MODBUS address layout for the various systems that can

be controlled by the STIIC PLC.

STIIC MODBUS Address Layout Table

System Max

Units on

STIIC

MODBUS

Device Add

Platinum Chillers 1 1 (Master PLC)

2 (Slave PLC)

VARC Chiller 1 3

XTC Seawater 1 11

ZTC Freshwater 1 13

XZ Combination System 1 15

SWV 1 20

MODBUS Converter 4 30–33

KRA #1 3 40–42

KRA #2 3 43–45

KRA #3 3 46–48

KRA #4 3 49–51

KRA #5 3 52–54

KRA #6 3 55–57

FAMU 1 60

3 Intended Use

The STIIC PLC application technology simpliﬁes

integration to ship-wide network control systems. This

allows one connection point for third-party soware

developers to communicate with enabled Dometic

systems on the network and provides easy monitoring

and control access for the user and technicians.

This manual provides the necessary information for the

proper installation and operation of the STIIC PLC.

NOTICE: Insuﬃcient installation, conﬁguration, or

operating parameters could result in unsatisfactory

performance and possibly failure.

The manufacturer accepts no liability for damage in the

following cases:

• Faulty assembly or connection

• Damage to the product resulting from mechanical

inﬂuences and excess voltage

• Alterations to the product without express permission

from the manufacturer

• Use for purposes other than those described in the

operating manual

Dometic Corporation reserves the right to modify

appearances and speciﬁcations without notice.

STIIC Controller Intended Use

4 Speciﬁcations

This section describes the display, electrical,

environmental, and physical speciﬁcations for the STIIC

PLC components: Touchscreen display, LCD display, and

electric box.

Touchscreen Technical Speciﬁcations

Display

Type LCD TFT

Resolution 800 x 480 (WVGA)

Active Display Area 7 in. (178 mm) diagonal

16:9 ratio

Colors 64 K

Backlighting LED

Brightness Adjustment Ye s

Electrical

Power Supply •24 VAC (-15% to +10%)

•50–60 Hz Max

•1.2 A (24 VAC)

•12–30 VDC, ±5% Max

•0–9 A at 12 VDC

Power Input 12 W (minimum power cable

cross-section of 0.5 mm2)

Fuse Automatic

Battery Not rechargeable, lithium,

model BR2330

Soware Class and

Structure

Resistance to Heat and Fire Category D

Immunity Against Voltage

Surges

Category II

Insulation Class Class III, incorporate in

class I or class III devices

Environmental Conditions

Operating Temperature -4°F to 140°F

(-20°C to 60°C)

Storage Temperature -4°F to 140°F

(-20°C to 60°C)

Operating and Storage

Humidity

5% to 85% relative humidity,

non-condensing

Protection Rating IP65 (front); IP20 (rear)

Degree of Pollution Degree II

Standards of Compliance Compliant with European

EMC and LVD directives;

UL Certiﬁcation

PLC Technical Speciﬁcations

Physical

Dimensions (H x W x D) 4.4 in. x 8.96 in. x 2.4 in.

(110 mm x 227.5 mm x 60 mm)

Assembly •DIN rail (in accordance with

DIN 43880 and IEC EN

50022)

•Panel

Environmental Conditions

Operating Conditions •-4°F to 140°F

(-20°C to 60°C)

•90% relative humidity,

non-condensing

Storage Conditions •-22°F to 158°F

(-30°C to 70°C)

•90% relative humidity,

non-condensing

Ingress Protection IP20 on the front panel only

Controller Pollution Class 2

Class According to

Protection Against Electric

Shock

Integrate into class I and/or

class II equipment

Electrical

Power Supply (VAC) •24 VAC (-15% to +10%)

•50–60 Hz Max

•2.5 A T external fuse

•45 VAC

Power Supply (VDC) •28–36 VDC (-20% to +10%)

•2.5 A T external fuse

•30 W

Battery •3 VDC lithium button battery

•.95 in. x .12 in. (24 x 3 mm)

•Code CR2430

•3 VDC lithium button battery

•.79 in. x .13 in.(20 x 3.2 mm)

•Code BR2032

Soware Class and

Structure

Electric box Dimensions

Height 10.50 in. (267 mm)

Width 15.00 in. (381 mm)

Depth 5.00 in. (127 mm)

8EN

Intended Use STIIC Controller

5 Wiring Diagram

Figure 4 and Figure 5 provide examples of the wiring

diagram and terminal connections used for STIIC PLC.

4 STIIC PLC Wiring Diagram

(with 4 Room Controls, 2 KRA units, VARC Chiller, ZTC SpotZero,

SeaXchange and 2 Touchscreens)

STIIC Controller Intended Use

5 Device Terminal Connections

10 EN

Installation and Setup STIIC Controller

6 Installation and Setup

This STIIC PLC is set up with basic factory defaults, so the

control requires conﬁguration to match the constraints of

the devices that are installed in the vessel.

6.1 Making Terminal Connections in

the Electric Box

WARNING: ELECTRICAL SHOCK HAZARD.

Exercise extreme care when working around

energized equipment. Failure to obey this warning

could result in death or serious injury.

The STIIC PLC electric box comes in two diﬀerent versions,

one with a 24 VDC power supply and one without the

24 VDC power supply. The components inside the electric

box are powered using 24 VDC. Verify which model is

being installed. Figure 6 shows the STIIC PLC electric box

without the 24 VDC power supply.

6 STIIC PLC Electric Box

Make the following connections to the electric box:

1. Wire the input power to the circuit breaker labeled

“CONTROL”.

2. Wire the three-wire communication cable from the

devices installed in the vessel to the appropriate

terminal in the STIIC PLC electric box:

– Wire MODBUS controlled units only to MODBUS

feedthroughs.

– Wire CANBUS controlled units only to CANBUS

feedthroughs.

Refer to Figure 5 on page 9 and the “Connection

Port Table” on page 10 for information on the correct

port to use when connecting Dometic devices to the

STIIC PLC.

Connection Port Table

Dometic Devices Connection to STIIC PLC

Platinum Chiller MODBUS Communication

VARC Chiller MODBUS Communication

Fresh Air Makeup PLC

Control

MODBUS Communication

XTC SeaXchange MODBUS Communication

ZTC SpotZero MODBUS Communication

XZ Combination MODBUS Communication

Shipwide Ventilation MODBUS Communication

Eskimo Ice CANBUS Communication

Room Controls CANBUS Communication

KRA MODBUS Communication

6.2 Connecting the Touchscreen

WARNING: ELECTRICAL SHOCK HAZARD.

Verify that all unit power lines are in unison phasing

to eliminate the potential for a short circuit. Failure

to obey this warning could result in death or serious

injury.

Figure 7 shows the available Touchscreen connection

ports.

7 Touchscreen Connections

qPower Input (24 VAC) eEthernet Connectivity

Port

wUSB Port rMODBUS

Communication Port

(serial port 1)

Make the following connections to the touchscreen:

1. Connect a 24 VAC power supply to the power input.

2. Connect a three-core communication cable to serial

port 1.

Table des matières

Autres manuels Dometic Unité de contrôle

Dometic

Dometic MCS-CTRL Manuel utilisateur

Dometic

Dometic Qht Manuel utilisateur

Dometic

Dometic MAGICSPEED MSBE7 Manuel utilisateur

Dometic

Dometic ACC3100D Manuel utilisateur

Dometic

Dometic Passport I/O Compact Manuel utilisateur

Dometic

Dometic PGD1 Manuel utilisateur

Dometic

Dometic Optimus i7700 Mode d’emploi

Dometic

Dometic CapTouch Manuel utilisateur

Dometic

Dometic Elite Control Series Manuel utilisateur

Dometic

Dometic AH-Passport I/O Compact Manuel utilisateur

Dometic

Dometic Connect Panel Manuel utilisateur

Dometic

Dometic Radome ECU Manuel d'instructions

Dometic

Dometic Smart D Manuel utilisateur

Dometic

Dometic DTD01 Manuel utilisateur

Dometic

Dometic 3308741.002 Manuel utilisateur

Dometic

Dometic Q3 Manuel utilisateur

Dometic

Dometic Switch200VTO Manuel utilisateur

Dometic

Dometic Smart Touch Cabin Control Manuel utilisateur

Dometic

Dometic AH Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur