DOM RONIS CoverK Manuel utilisateur
CoverK
Instructions
CoverK
INSTRUCTIONS
MANAGEMENT CARD
MASTER CARDS
USER CARDS
Cards and functions
MANAGEMENT CARD
Function:
Create and Delete Master cards
MASTER CARD
Functions: Create / Delete User cards
(Single user only) Inspection mode
and Delete User cards
USER CARD
Functions: Open / Close locks
SETTINGS CARD
Functions: Duplicate parameters
from lock A to lock B.
■ Modes : Multiuser (Public) /
Single User (Private)
■ Acoustic signal
■ Automatic opening time
CoverK
INSTRUCTIONS
Single User mode:
1. The lock is closed.
2. Place the assigned User Card close
to the lock. The lock will open.
3. Aer 2 seconds the latch
closes automatically.
4. OK: 1 long beep = the lock is closed
5. NOT OK: and 3 short beeps.
....
Multiuser mode: Close and Open
1. The locker is open.
2. Place the blank User Card close
to the lock. The lock is now
assigned to the card.
3. If you present your card again the
lock will open and reset for the next
usage. (Same or dierent User card)
4. OK: 1 long beep = the lock will close
5. NOT OK: 3 short beeps = lock is
already assigned to another User
Card or the User Card is already
assigned to another lock.
....
Close Open
Assign the Management card
Locks are typically pre-assigned with
the correct Management Card.
ATTENTION
Read the process in full!
1. Place the Management Card
close to the lock :
1 long beep
Wrong process : 3 short beeps
.... .. .. .. ..
CoverK
INSTRUCTIONS
Create Master Card
Maximum 5 Master Cards allowed
per lock.
ATTENTION
1. Place the Management Card close
to the lock :
1 long beep + intermittent beep
2. During the intermittent short beeps,
place the Master Card close to
the lock :
1 long beep.
3. To finish the process correctly,
wait 5 seconds until the intermittent
short beeps stop.
.... .. .. .. .. .... .. .. .. ..
Wrong process : 3 short beep
CoverK
INSTRUCTIONS
Delete Master Card
ATTENTION
1. Place Management Card close
to the lock: 1 long beep +
intermittent beep.
2. During the intermittent short beeps,
place the assigned Master Card
close to the lock: 2 short beeps.
3. To finish the process correctly,
wait 5 seconds until the
programming sound stops.
Wrong process : 3 short beeps
.... .. .. .. .. .... .. .. .. ..
Delete all Master Cards
For this process, it is not necessary
to use the Master Cards.
To remove all the Master Cards at
once, place the Management Card
close to the lock 4 times (4 beeps).
■ To finish the process correctly,
wait 5 seconds until the intermittent
beeps stop. A final confirmation
sound will indicate the end of
the process.
Wrong process : 3 short beeps
.... .. .. .. ..
x4
CoverK
INSTRUCTIONS
Inspection process
ATTENTION:
The CoverK lock must be closed
prior to the inspection process.
1. Place the Master Card close
to the lock: 1 long beep.
2. Wait (5 intermittent short beeps).
3. The CoverK lock will open during
the inspection time of 30 seconds.
4. When the inspection time ends,
the latch will close and the final
inspection sound will be heard,
keeping the previous user.
Wrong process : 3 short beeps
.... .. .. .. ..
Autres manuels pour RONIS CoverK
1
Table des matières
Autres manuels DOM Verrouillage
