Dodge Challenger 2019 Manuel utilisateur

2019 CHALLENGER QUICK REFERENCE GUIDE

Vehicle User Guide — If Equipped

To access the Vehicle User Guide on your

Uconnect Touchscreen: Tap the Uconnect Apps

button, then tap the Vehicle User Guide icon on

your touchscreen. No Uconnect registration is

required.

NOTE:

Vehicle User Guide features are not available

while the vehicle is moving.

Features

• Your User Guide — Updated in real-time

• Available when and where you need it

• Touchscreen convenience

• Customizable interface

• Maintenance schedules and information

• Multilingual

• Comprehensive icon & symbol glossary

Keyless Enter-N-Go — Passive

Entry

The Keyless Enter-N-Go system is an enhance-

ment to the vehicle’s key fob. This feature allows

you to lock and unlock the vehicle’s door(s) and

trunk without having to press the key fob lock or

unlock buttons.

To Unlock From The Driver Or

Passenger Side

Uconnect 4C NAV With 8.4–inch Display

Vehicle User Guide Touchscreen Icon

Grab The Door Handle To Unlock

VEHICLE USER GUIDE — IF

EQUIPPED

PASSIVE ENTRY

• With a valid Keyless Enter-N-Go key fob located

outside the vehicle and within 5 ft (1.5 m) of

the driver or passenger side door handle, grab

either front door handle to unlock the door

automatically.

To Lock The Vehicle

• Both front door handles have buttons located

on the outside of the handle. With one of the

vehicle's Keyless Enter-N-Go key fobs located

outside the vehicle and within 5 ft (1.5 m) of

the driver's or passenger front door handle,

push the door handle button to lock the two

doors and trunk.

• Do NOT grab the door handle, when pushing

the door handle button. This could unlock the

door(s).

NOTE:

• If “Unlock All Doors 1st Press” is programmed,

all doors will unlock when you grab hold of the

front driver's door handle. Additionally, all

doors and the trunk will unlock with this option

programmed when you push the trunk button.

• If a key fob is detected in the vehicle when

locking the vehicle using the power door lock

switch, the doors and trunk will unlock, and the

horn will chirp three times. On the third at-

tempt, your key fob can be locked inside the

vehicle.

• After pushing the Keyless Enter-N-Go lock but-

ton, you must wait two seconds before you can

lock or unlock the vehicle using the door

handle. This is done to allow you to check if the

vehicle is locked by pulling the door handle

without the vehicle reacting and unlocking.

• If a Keyless Enter-N-Go door handle has not

been used for 72 hours, the Keyless Enter-

N-Go feature for that handle may time out.

Pulling the deactivated front door handle will

reactivate the door handle's Keyless Enter-

N-Go feature.

Push The Button To Lock

Do NOT Grab The Handle When Locking

To Enter The Trunk

• With a valid Keyless Enter-N-Go key fob located

outside the vehicle and within 5 ft (1.5 m) of

the deck lid, push the button located on the

center of the light bar which is located on the

deck lid above the license plate.

For further information, and applicable warnings

and cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca (Cana-

dian Residents).

Instrument Cluster Display

The instrument cluster display features an inter-

active driver display that is located in the instru-

ment cluster. Pushing the controls on the left side

of the steering wheel allows the driver to select

vehicle information and Personal Settings.

Trunk Release Button

Instrument Cluster Display Controls

INSTRUMENT CLUSTER

DISPLAY

• Push the up button to scroll upward through the

main menus (Speedometer, mph/km/h, Vehicle

Info, Performance Pages – SRT only, Driver

Assist, Fuel Economy, Trip A, Trip B, Audio,

Stored Messages, Screen Set Up).

• Push the down button to scroll downward

through the main menu and submenus (Speed-

ometer, mph/km/h, Vehicle Info, Driver Assist,

Fuel Economy, Trip A, Trip B, Audio, Stored

Messages, Screen Set Up).

• Push the right button to access the information

screens or submenu screens of a main menu

item.

• Push the left button to access the information

screens or submenu screens of a main menu

item.

• Push the OK button to access/select the infor-

mation screens or submenu screens of a main

menu item. Push and hold the OK button for

two seconds to reset displayed/selected fea-

tures that can be reset. Pushing OK button will

also toggle between mph and km/h on the

digital speedometer.

Compass Calibration

This compass is self-calibrating, which eliminates

the need to set the compass manually. When the

vehicle is new, the compass may appear erratic,

and the cluster will display dashes (- -) until the

compass is calibrated.

You may also calibrate the compass by completing

one or more 360 degree turns (in an area free from

large metal or metallic objects) until the dashes (- -)

displayed in the cluster turn off. The compass will

now function normally.

For further information, and applicable warnings

and cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca (Cana-

dian Residents).

Pairing Procedure

Mobile phone pairing is the process of establish-

ing a wireless connection between a cellular

phone and the Uconnect system.

Start Pairing Procedure On The Radio

Uconnect 4 With 7-inch Display

1. Place the ignition in the ACC or ON position.

2. Press the “Phone” button.

3. Select “Settings.”

4. Select “Paired Phones.”

Uconnect 4 With 7-Inch Display

PHONE PAIRING

5. Select “Add device.”

•

Uconnect Phone will display an “In progress”

screen while the system is connecting.

Uconnect 4C & 4C NAV With 8.4-inch Display

1. Place the ignition in the ACC or ON position.

2. Press the “Phone” button in the Menu Bar on

the touchscreen.

3. Select “Pairing.”

4. Select “Paired Phones And Audio Devices.”

5. Select “Add Device.”

•

Uconnect Phone will display an “In progress”

screen while the system is connecting.

Pair Your iPhone:

To search for available devices on your Bluetooth

enabled iPhone:

1. Press the Settings button.

2. Select Bluetooth.

• Ensure the Bluetooth feature is enabled.

Once enabled, the mobile phone will begin

to search for Bluetooth connections.

3. When your mobile phone finds the Uconnect

system, select “Uconnect”.

Complete The iPhone Pairing Procedure:

1. When prompted on the mobile phone, accept

the connection request from Uconnect Phone.

NOTE:

Some mobile phones will require you to enter the

PIN number.

Uconnect 4C & 4C NAV With 8.4-Inch Dis-

play

Bluetooth On/Uconnect Device Pairing Request

Pair Your Android Device:

To search for available devices on your Bluetooth

enabled Android Device:

1. Push the Menu button.

2. Select Settings.

3. Select Connections.

4. Turn Bluetooth setting to “On.”

• Ensure the Bluetooth feature is enabled.

Once enabled, the mobile phone will begin

to search for Bluetooth connections.

5. Once your mobile phone finds the Uconnect

system, select “Uconnect”.

• You may be prompted by your mobile phone

to download the phonebook, check “Do Not

Ask Again” to automatically download the

phonebook. This is so you can make calls by

saying the name of your contact.

Complete The Android Pairing Procedure:

1. Confirm the passkey shown on the mobile

phone matches the passkey shown on the

Uconnect system then accept the Bluetooth

pairing request.

NOTE:

Some mobile phones require the PIN to be en-

tered manually, enter the PIN number shown on

the Uconnect screen.

NOTE:

Software updates on your phone or the Uconnect

system may interfere with the Bluetooth connec-

tion. If this happens, simply repeat the pairing

process. However, first, make sure to delete the

device from the list of phones on your Uconnect

system. Next, be sure to remove Uconnect from

the list of devices in your phone’s Bluetooth set-

tings.

For further information on Uconnect Phone,

please refer to “Uconnect Phone” in the vehicle’s

User Guide.

Uconnect Device

Pairing Request

Automatic High Beam —

If Equipped

This system automatically controls the operation

of the headlamp high beams as oncoming vehicles

approach.

• The Automatic High Beam Headlamp Control

can be turned on or off using the Uconnect

System.

• Push the turn signal lever away from you.

•

With the headlight switch in the “AUTO” posi-

tion, the high beams are controlled automatically.

• Pull the turn signal lever toward you to manu-

ally deactivate the system.

• To improve system recognition of crossing traf-

fic, and to limit use in a residential area, the

vehicle must be moving at a speed greater than

20 mph (32 km/h) before the Automatic High

Beam Module (AHBM) begins requesting high

beam activation.

NOTE:

If the windshield or Automatic High Beam Head-

lamp Control mirror is replaced, the mirror must

be re-aimed to ensure proper performance. See an

local authorized dealer.

For further information, and applicable warnings

and cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca

(Canadian Residents).

Adaptive Cruise Control (ACC) —

If Equipped

If your vehicle is equipped with Adaptive Cruise

Control, the controls operate exactly the same as

the standard cruise control, with one difference.

You can set a specified distance you would like to

maintain between you and the vehicle in front of

you.

• If the ACC sensor detects a vehicle ahead, ACC

will apply limited braking or acceleration auto-

matically to maintain a preset following dis-

tance while matching the speed of the vehicle

ahead.

NOTE:

Your vehicle will not exceed the cruise speed you

have set.

LIGHTS SPEED CONTROL

• If the sensor does not detect a vehicle directly

ahead of you, it functions like a standard cruise

control system, maintaining the speed you set.

For further information, and applicable warnings

and cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca (Cana-

dian Residents).

Forward Collision Warning —

If Equipped

The Forward Collision Warning (FCW) system pro-

vides the driver with audible warnings, as well as

visual warnings within the instrument cluster dis-

play, to warn the driver when a potential frontal

collision is detected. The warnings are intended to

provide the driver with enough time to react, to

avoid or mitigate the potential collision.

FCW monitors the information from the forward

looking sensors, as well as the Electronic Stability

Control (ESC) system, to calculate the probability

of a forward collision. When the system deter-

mines that a forward collision is probable, the

driver will be provided with the audible and visual

warnings.

NOTE:

The FCW feature can be customized and turned

off through the Uconnect System touchscreen.

Adaptive Cruise Switches

1 — Adaptive Cruise Control (ACC)

On/Off

2 — Distance Setting – Decrease

3 — Distance Setting – Increase

SAFETY FEATURES

For further information, and applicable warnings

and cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca (Cana-

dian Residents).

SRT Vehicles

Chassis

• Wheels - due to the high performance nature of

the brake system, the wheels will get coated

with brake dust. It is recommended that

Mopar

Wheel Cleaner be used on your wheels

to avoid any possible damage to the finish.

However, do not use wheel cleaner if your

vehicle is equipped with Dark Vapor or Black

Satin Chrome wheels, which must only be

cleaned with mild soap, water, and a soft cloth.

NOTE:

Due to the high performance nature of the brakes

on your SRT, vehicle dust and some noise are

expected and normal.

• Tire Service Kit - your vehicle comes with a tire

inflator kit; there is no spare tire included in

your vehicle.

•

Trailer Tow - Trailer towing with your SRT vehicle

is not recommended.

• ESC (Electronic Stability Control) - your vehicle

is equipped with selectable ESC modes. The

ESC mode selected will alter the handling char-

acteristics of your vehicle.

•

Adjustable Modes - your vehicle is equipped with

selectable driving modes: Default (Street), Sport,

Track, Custom, ECO, and Valet. Please refer to

the Owner’s Manual for further information.

• Three-Season Tires - This vehicle may be

equipped with three-season tires to enhance

performance. FCA US LLC does not recom-

mend use of these tires when temperatures are

below 40°F (4°C) or in snow/ice conditions.

Powertrain & Drivetrain

• Engine & Transmission (SRT Engine Break-In

Recommendations) - The following tips will be

helpful in obtaining optimum performance and

maximum durability for your new SRT Vehicle.

Despite modern technology and World Class

manufacturing methods, the moving parts of

the vehicle must still wear in with each other.

This wearing in occurs mainly during the first

500 miles (805 km) and continues through the

first oil change interval.

NOTE:

Check engine oil with every refueling and add if

necessary. Oil and fuel consumption may be

higher through the first oil change interval.

STARTING AND OPERATING

Autres manuels pour Challenger 2019

Table des matières

Autres manuels Dodge Automobile

Dodge

Dodge Challenger SRT 392 2015 Manuel du propriétaire

Dodge

Dodge Dakota 2011 Manuel utilisateur

Dodge

Dodge 2009 Dakota Manuel utilisateur

Dodge

Dodge challenger 2017 Manuel utilisateur

Dodge

Dodge 2011 Dodge Nitro Manuel utilisateur

Dodge

Dodge 2012 Ram Truck Gas 2500 Manuel utilisateur

Dodge

Dodge Grand Caravan Manuel utilisateur

Dodge

Dodge 2013 VIPER SRT Manuel utilisateur

Dodge

Dodge 2009 nitro Manuel utilisateur

Dodge

Dodge 2016 Challenger Manuel utilisateur

Dodge

Dodge avenger 2013 Manuel utilisateur

Dodge

Dodge Caliber 2012 Manuel utilisateur

Dodge

Dodge Grand Caravan 2018 Manuel utilisateur

Dodge

Dodge DURANGO 2017 Manuel utilisateur

Dodge

Dodge Ram Truck 1500 Mode d’emploi

Dodge

Dodge RAM PROMASTER CITY 2018 Manuel utilisateur

Dodge

Dodge 2016 Viper SRT ACR Manuel utilisateur

Dodge

Dodge 2008 Caravan Manuel utilisateur

Dodge

Dodge CALIBER 2011 Manuel utilisateur

Dodge

Dodge 2006 Durango Manuel utilisateur

Dodge

Dodge 2006 ZB Viper Manuel utilisateur

Dodge

Dodge avenger 2013 Manuel utilisateur

Dodge

Dodge RAM 2016 Manuel utilisateur

Dodge

Dodge Ram 2004 Manuel utilisateur

Manuels Automobile populaires d'autres marques

Toyota

Toyota 2000 Tundra Manuel utilisateur

CITROËN

CITROËN DS4 DSign Manuel utilisateur

Lexus

Lexus 2015 CT 200h Manuel utilisateur

Cadillac

Cadillac CTS 2008 Manuel utilisateur

Mercedes-Benz

Mercedes-Benz M-class ML 55 AMG Manuel utilisateur

Porsche

Porsche Boxster S Manuel utilisateur

GMC

GMC 2010 Savana 1500 Cargo Manuel utilisateur

KIAM

KIAM SPORTAGE 2014 Manuel de la liste des pièces

GMC

GMC 2013 Terrain Instructions de montage

GMC

GMC T-Series 1999 Manuel utilisateur

Mercury

Mercury 1998 Mystique Manuel utilisateur

Mercury

Mercury 2007 Mariner Manuel utilisateur

Mazda

Mazda 2007 Mazdaspeed 3 Mode d’emploi

Mazda

Mazda 2014 CX-5 Manuel utilisateur

GMC

GMC Chevrolet Express 2022 Manuel utilisateur

GMC

GMC 1997 Jimmy Manuel utilisateur

Chevrolet

Chevrolet 2012 Malibu Manuel utilisateur

Cadillac

Cadillac 2010 Escalade Manuel utilisateur