DMP Electronics 1168 Guide d'installation
INSTALLATION AND PROGRAMMING GUIDE
1168 Wireless Smoke/CO/Low
Temp Detector
TABLE OF CONTENTS
About the 1168 ............................... 1
Indicator LEDs................................................. 1
Power Supply .................................................. 1
Voice Annunciation....................................... 1
Tamper Magnet............................................... 1
Cadence Synchronization ......................... 1
Low Temp Sensor .......................................... 1
1168 Features..................................2
Program the 1168 ...........................3
Select A Location ........................ 10
Install the 1168 .............................. 11
Mount the Base...............................................11
Install the Battery ......................................... 12
Replace the Cover ....................................... 12
Mounting Guidelines ....................13
Authority Having Jurisdiction..................14
Locations to Avoid ....................................... 15
Commercial .................................................... 16
Multi-Family .................................................... 16
Test the 1168 ..................................17
Smoke Test ...................................................... 17
CO Test.............................................................. 17
Additional Information ................21
Reset the Language Selection................. 21
Supervision Message................................... 21
Inspection Testing and Maintenance..... 21
Replace The Batteries.................................22
NFPA 72 Guidelines .....................................23
1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 1
ABOUT THE 1168
The 1168 Wireless Smoke/CO/Low Temp Detector features multi-criteria smoke sensing
using a combination of photoelectric, heat, IR flame flicker, and carbon monoxide
indicators. The 1168 reports fire, CO, and low temp alarms to the control panel. Use the
onboard wireless transmitter to connect the 1168 with DMP1100Series Wireless Receivers.
INDICATOR LEDS
The 1168 has a multi-color top LED that
indicates the state of the device:
• GREEN—Supervisory indication; blinks
during power on, reset, and during
normal operation
• AMBER—Signal maintenance and
trouble events
• RED—Alarm (Smoke/CO/Low Temp)
Indicator lights on the side alarms (initiating
detector only):
• RED—Smoke
• BLUE—CO
POWER SUPPLY
The 1168 is powered by four 3.0V lithium
batteries. Battery life expectancy for the
unit is at least three years under normal
conditions.
VOICE ANNUNCIATION
The 1168 audibly announces alarm and
maintenance requirements, enhancing
occupant understanding and evacuation.
TAMPER MAGNET
The 1168 features a tamper magnet which
sends a trouble message to the panel if the
detector is removed from the mounting
base.
CADENCE SYNCHRONIZATION
The 1168 provides cadence synchronization
with other 1168 or 1164 units on the system.
LOW TEMP SENSOR
The 1168 includes a low temperature
sensor that causes an alarm when inside
temperature falls below 41°F (5°C).
1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide2
1168 FEATURES
Figure 1: 1168 Features
CO Test Button Smoke Test Button
Indicator
LED
IR Flame
Detector
Indicator
Lights
CO Entry
Port
Indicator
Lights
1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 3
PROGRAM THE 1168
When programming an 1168 Wireless Smoke/CO/Low Temp Detector, refer to the
appropriate panel programming guide as needed.
PROGRAMMER MENU
Enter 6653 (PROG) at the keypad to enter the PROGRAMMER
menu.
ZONE INFORMATION
Press CMD until ZONE INFORMATION displays. Press a select
key or area to enter the menu.
ZONE NUMBER
Enter the zone number. Press CMD.
Note: The 1168 takes up to three zone numbers (Smoke,
CO, Temp). The zone numbers must be consecutive.
ZONE NAME
Denote the zone name as a fire zone. Press CMD.
ZONE TYPE
Press any select area. Press CMD to move to the next set of
menu options. Select FI (fire) as the ZONE TYPE.
PROGRAMMER
ZONE INFORMATION
ZONE NO:
* UNUSED *
ZONE TYPE
FI PN EM SV
1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide4
FIRE BELL OUT
Default is 0. Press CMD.
NEXT ZONE
At the NEXT ZONE? prompt, select NO.
WIRELESS
At the WIRELESS? prompt, select YES.
Note: If you are programming the 1168 onto a zone that
can be either hardwired or wireless, then this prompt
appears. If the zone you are programming is wireless-only,
then the prompt does not appear.
SERIAL NUMBER
Enter the eight-digit SERIAL #: - found on the device and press
CMD.
CONTACT TYPE
Enter the CONTACT type as FIRE and press CMD.
FIRE BEL OUT: 0
NEXT ZONE? NO YES
WIRELESS? YES
TRANSMITTER
SERIAL #: -
CONTACT: FIRE
1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 5
SUPERVISION TIME
Enter the SUPVSN TIME, and press CMD.
NEXT ZONE
At the NEXT ZONE? prompt, select YES.
ZONE NUMBER
Enter the zone number. This number must be consecutive
with the previous zone. For example, if 500 was entered for
Fire,501 should be entered here. Press CMD.
ZONE NAME
Denote the zone name as a carbon monoxide (CO) zone. Press
CMD.
ZONE TYPE
Press any select area. Press CMD three times to move to the
last set of menu options. Select CO (carbon monoxide) as the
ZONE TYPE.
FIRE BELL OUT
Default is 0. Press CMD.
SUPVSN TIME: 240
NEXT ZN? YES
ZONE NO:
* UNUSED *
ZONE TYPE
CO IN
FIRE BEL OUT: 0
1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide6
NEXT ZONE
At the NEXT ZONE? prompt, select NO.
WIRELESS
At the WIRELESS? prompt, select YES.
Note: If you are programming the 1168 onto a zone that
can be either hardwired or wireless, then this prompt
appears. If the zone you are programming is wireless-only,
then the prompt does not appear.
SERIAL NUMBER
Enter the eight-digit SERIAL #: - found on the device and press
CMD.
CONTACT TYPE
Enter the CONTACT type as CO and press CMD.
SUPERVISION TIME
Enter the SUPVSN TIME, and press CMD.
NEXT ZONE? NO YES
WIRELESS? YES
TRANSMITTER
SERIAL #: -
CONTACT: CO
SUPVSN TIME: 240
Autres manuels pour 1168
1
Table des matières
Autres manuels DMP Electronics Capteur de sécurité
DMP Electronics
DMP Electronics 1121 Instructions de montage
DMP Electronics
DMP Electronics XTLtouch International Series Manuel utilisateur
DMP Electronics
DMP Electronics 1126 Series Instructions de montage
DMP Electronics
DMP Electronics 1127W Manuel utilisateur
DMP Electronics
DMP Electronics 1127W-WINT Instructions de montage
DMP Electronics
DMP Electronics 1128 Manuel utilisateur
DMP Electronics
DMP Electronics 1183 Series Manuel utilisateur
DMP Electronics
DMP Electronics 1129 WIRELESS GLASSBREAK DETECTOR Manuel utilisateur
DMP Electronics
DMP Electronics DEL AOP PRO 50 Manuel utilisateur
DMP Electronics
DMP Electronics XTLplusINT Series Guide d'installation
DMP Electronics
DMP Electronics 1166 Manuel utilisateur
DMP Electronics
DMP Electronics 1125 Instructions de montage
DMP Electronics
DMP Electronics 1126R Manuel utilisateur
DMP Electronics
DMP Electronics 1122INT Manuel utilisateur
DMP Electronics
DMP Electronics 1128 Manuel utilisateur
DMP Electronics
DMP Electronics 1161 Manuel utilisateur
DMP Electronics
DMP Electronics XR Series Manuel utilisateur
DMP Electronics
DMP Electronics 1184 Manuel utilisateur
DMP Electronics
DMP Electronics XT30INT Manuel utilisateur
DMP Electronics
DMP Electronics 1124 Manuel utilisateur
