dji OSMO MOBILE SE Manuel utilisateur
User Manual 2022.09
v1.0
2
©2022 DJI All Rights Reserved.
Using this Manual
Legend
Important Hints and Tips
Before Use
Read the following documents before using DJITM OSMOTM Mobile SE:
1. Safety Guidelines
2. Quick Start Guide
3. User Manual
It is recommend to watch all tutorial videos on the official DJI website (www.dji.com/
osmo-mobile-se/video) or in the DJI Mimo app. Read the safety guidelines and quick start
guide before using for the first time. Refer to this user manual for more information.
Downloading the DJI Mimo App
Scan the QR code above to download the latest version of DJI Mimo app.
The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version
of DJI Mimo is compatible with Android v8.0 and later.
DJI Mimo App
https://s.dji.com/guide37
Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are
using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or
Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to
that section.
Printing this Document
This document supports high resolution printing.
©2022 DJI All Rights Reserved. 3
Using this Manual 2
Legend 2
Before Use 2
Downloading the DJI Mimo App 2
Introduction 4
Overview 4
Getting Started 5
Charging 5
Attaching the Phone 5
Using Osmo Mobile SE 7
On-board Features 7
Operating Mode 10
DJI Mimo App 11
Connecting to the DJI Mimo App 12
Camera View 12
Firmware Update 16
How to Update 16
Storage 16
Specifications 17
Contents
4
©2022 DJI All Rights Reserved.
Introduction
Boasting 3-axis stabilization, the lightweight Osmo Mobile SE unlocks the full potential
of your mobile phone. The foldable magnetic design makes setup easier than ever,
transportation and storage more convenient. Osmo Mobile SE can be operated in both
portrait and landscape, while the upright, underslung, side grip, and low position modes
help capture the perfect shot. Take content to the next level through DJI Mimo with
ActiveTrackTM 5.0, DynamicZoom, and Pano. The Story mode, Timelapse, and ShotGuides
provide step-by-step tutorials according to the scenario and help generate a video that
can be shared on social media.
Overview
1. Magnetic Phone Clamp 3
2. Roll Motor
3. M3×0.5 Screw Hole
4. Pan Motor
5. Status Panel
6. Joystick
7. Zoom Slider
8. 1/4"-20 UNC Port
9. Charging Port (USB-C)
10. Switch Button
11. Shutter/Record Button
12. Power/M Button
13. Tilt Motor
14. Trigger
Osmo Mobile SE is compatible with DJI OM Fill Light Phone Clamp, which can be
purchased in the DJI Store.
1
2
3
4
7
5
910
11
12
13
14
6
8
©2022 DJI All Rights Reserved. 5
Getting Started
Charging
To charge Osmo Mobile SE, connect a USB adapter (not included) to the charging port
using the power cable. The battery is fully charged when the battery level indicator turns
off on the status panel.
Charging time: approx. 2 hours and 12 minutes (tested in the environment temperature
of 25° C when using a 10 W charger)
Max runtime: approx. 8 hours (tested with the gimbal balanced and held steadily. This
value should be taken as a reference only)
Attaching the Phone
1. Attach the magnetic phone clamp in the center of the phone. The magnetic phone
clamp can be stretched to adapt to the mobile phone width. The camera mark should
point towards the camera of the phone.
Osmo Mobile SE User Manual
6
©2022 DJI All Rights Reserved.
The anti-slip pads help to secure the mobile phone and the magnetic phone clamp. Attach
the anti-slip pad to the magnetic phone clamp as shown in the figure below and press
down firmly.
Magnetic Phone Clamp Tips
Make sure the direction of the magnetic phone clamp is the same as shown in the figure
above. For optimal performance, make sure the magnetic phone clamp is in the middle of
the mobile phone, and the distance between the clamp arms is the same.
2. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the
mobile phone to Osmo Mobile SE.
3. Unfold the gimbal as shown. Press and hold the M button to power on. Osmo Mobile
SE will stabilize once the gimbal mode indicator lights up on the status panel.
2s
1
2
©2022 DJI All Rights Reserved. 7
M Button
When powered off
Press once: check the battery level
Press and hold: power on
When powered on
Press once: switch between gimbal modes
Press three times: enter standby mode (press any button to exit)
Press and hold: power off. Press and hold for 20 seconds to force
power off
Using Osmo Mobile SE
On-board Features
Status Panel
Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.
System Status Indicator Descriptions
Blinking Pattern Descriptions
Solid yellow Bluetooth disconnected
Solid green Bluetooth connected
Pulses yellow or green Standby mode
Blinks red and green alternately Firmware updating/firmware update failed
Solid red Abnormal status detected
Battery Level Indicator Descriptions
Blinking Pattern Battery Level
Blinks red quickly ≤5%
Solid red 6%-19%
Solid yellow 20%-60%
Solid green >60%
Gimbal Mode
Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement
of the grip. Suitable for scenarios when moving up and down or on a slant.
Tilt Locked: only the pan axis follows, where only the pan axis follows the movement
of the grip. Suitable for scenarios such as arc shots or moving from left to right.
FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the
grip. Suitable for shooting the first-person view.
SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis
rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is
suitable for shooting push, pull, and down.
Osmo Mobile SE User Manual
8
©2022 DJI All Rights Reserved.
Zoom Slider
Move the slider to the + direction to enlarge the subject and move
the slider to the - direction to shrink. Push the slider once to
change the zoom once. Push the slider continuously to change the
zoom continuously.
Joystick
Move vertically and horizontally to tilt and pan the mobile phone.
The joystick control direction can be set in DJI Mimo. Use the
joystick to navigate through settings on the Quick Settings page.
Shutter/Record Button
Press once: take a photo or start or stop recording.
Press and hold: for burst shooting when in photo mode.
Switch Button
Press once: switch between front and rear cameras.
Press twice: switch between landscape and portrait mode.
Press three times: switch between photo and record mode. The
feature can be set to control Quick Settings in DJI Mimo.
Trigger
Press once to start or stop ActiveTrack 5.0 (requires used with
Mimo).
Press twice to recenter the gimbal. When using ActiveTrack 5.0,
the gimbal will recenter to the center of the camera view.
Press once, and then press and hold to adjust the follow speed
to fast mode, release to exit.
Press and hold to enter lock mode. In lock mode, the gimbal will
not follow the handle movements. Release to exit lock mode.
Charging Port (USB-C)
Charge Osmo Mobile SE by connecting a USB adapter to this port.
1/4"-20 UNC Port
The 1/4"-20 UNC port can be used to attach a tripod.
Osmo Mobile SE User Manual
©2022 DJI All Rights Reserved. 9
M3×0.5 Screw Hole
Used to mount counterweights. Counterweights should be used
if a camera lens or microphone is mounted on the mobile phone.
Make sure the total weight of these accessories is less than 290 g.
Combination Operation
Press the switch button, shutter/record button, and trigger simultaneously for more than
one second to reset the Bluetooth name and connection and reconnect.
Osmo Mobile SE will be powered off automatically if there is no operation for three
minutes in standby mode.
Osmo Mobile SE User Manual
10
©2022 DJI All Rights Reserved.
Upright Mode
Upright mode can be used without any
further user input. In this mode, press the
trigger twice quickly to center the mobile
phone.
Underslung Mode
Hold Osmo Mobile SE upside down to
enter Underslung mode, in which the
mobile phone can easily capture images
from a lower position. Press the trigger
twice to center the mobile phone.
Side Grip Mode
Rotate Osmo Mobile SE to the right or
left by 90° to go from Upright to Side Grip
mode. Press the trigger twice to center
the mobile phone.
Low Position Mode
Press and hold the trigger, and then tilt
Osmo Mobile SE forward to enter Low
Position mode. The tilt angle is enlarged,
making it more suitable to shoot from a
low position.
Operating Mode
Operation modes apply when used in portrait and landscape mode.
Table des matières
Autres manuels dji Accessoires pour appareils photo
dji
dji MG-12000 Manuel utilisateur
dji
dji RS 2 Manuel utilisateur
dji
dji OSMO Manuel utilisateur
dji
dji Focus Manuel utilisateur
dji
dji SMO Manuel utilisateur
dji
dji Ready Rig Quick Connector Manuel utilisateur
dji
dji Zenmuse XT Manuel utilisateur
dji
dji RONIN-M Manuel utilisateur
dji
dji RONIN 2 Manuel utilisateur
dji
dji Ronin-MX Manuel utilisateur
dji
dji LiDAR Range Finder Manuel utilisateur
dji
dji RSC 2 Manuel utilisateur
dji
dji RONIN-S Focus Motor Manuel utilisateur
dji
dji RONIN 4D Manuel utilisateur
dji
dji T20 Manuel utilisateur
dji
dji ZENMUSEX9 Manuel utilisateur
dji
dji TB50 Mode d’emploi
dji
dji RONIN 2 Manuel utilisateur
dji
dji Zenmuse X5 Manuel utilisateur
dji
dji OSMO MOBILE 3 Manuel utilisateur
