Display Mount Pro GS352D Manuel utilisateur

English

Installation Instruction

UNPACKING INSTRUCTIONS

! Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

! Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

! Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

! Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

! Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Par ts List

CAUTION!

WARNING

!This monitor desktop mount must be securely

attached to the horizontal desk. If the mount is

not properly installed it may fall, resulting in

possible injury and/or damage.

Tools Required Phillips Screwdriver

(1) 35mm Tube Support-a (2) VESA Plate with

Gas Spring Arm-c

(8)M4 Space-n(8)M4x30 Bolt-m

(1) Disconnected

“C” Clamp-b

(2)M10x15 Bolt-j (1)Allen Key-k(4)M6x12 Bolt-i(6)M4x6 Bolt-h

(2)Add-on Arm-d (2)Wire Cover-e (4)Axis Cover-f (1)Stopper Ring-g

(1)Arm Connector-o

(8)M4x12

Thumb Bolt-l

Step 1 Install the “C” Clamp According to the Desktop Thickness

Step 2 Install Stopper Ring to the Tube Support

The depth of “C” clamp can be changed in

three positions. Choose the proper depth

acc o r di n g to t he thi c k ne s s of y ou r

desktop. Connect it by 2pcs M10x15

bolts(j), using the supplied Allen Key(k).

Install Stopper Ring(g) to the

Tube Support(a), fasten the

grub screw by supplied Allen

Key(k).

Grub Screw

Step 3 Assemble Two Arms and Wire Cover

For Curved Back Monitor

Step 4

Step 5

Install Arm to the Tube Support

Mount the Monitor to VESA Plate

*The Add-on Arm(d) can be removed as another option if you use stand for the

smaller screens on a desk that is against a wall.

For Flat Back Monitor

Step 7 Adjust the Torque of Gas Spring

Adjust the torque of gas spring according to the weight of your

monitor. If your monitor can not stay in the lower position, turn the

grub screw clockwise(-). If your monitor can not stay in the higher

position, turn the grub screw counterclockwise(+). Keep turning

until monitor position can be raised and lowered easily.

Step 6 Make Necessary Adjustments, and Run Cables

Thank you for choosing our products!

Fix Tilt

Angle

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Display Mount Pro Support et étagère

Display Mount Pro

Display Mount Pro CURVE-D-STAND Manuel utilisateur

Display Mount Pro

Display Mount Pro LCD351D-STAND Manuel utilisateur

Display Mount Pro

Display Mount Pro FS411 Manuel utilisateur

Display Mount Pro

Display Mount Pro SSW004 Manuel utilisateur

Display Mount Pro

Display Mount Pro GS-002-WALL Manuel utilisateur

Display Mount Pro

Display Mount Pro ND6455 Manuel utilisateur

Display Mount Pro

Display Mount Pro LCD482T-STAND Manuel utilisateur

Display Mount Pro

Display Mount Pro GS-001-WALL Manuel utilisateur

Display Mount Pro

Display Mount Pro ATV-04 Manuel utilisateur

Display Mount Pro

Display Mount Pro MDM 003T Manuel utilisateur

Display Mount Pro

Display Mount Pro LCD512-S Manuel utilisateur

Display Mount Pro

Display Mount Pro LCD3502-T Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur