Disc NSM4000 Manuel utilisateur
__________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
1
Quick Installations Guide
NSM3000
NSM4000
NSM7000
and
DISC1000
DISC3000
DISC4000
DISC7000
__________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
2
__________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
3
Table of Contents
Table of Contents 3
Copyrights and Trademarks 5
Safety Instructions 8
Setup 13
Checking the Delivery 14
Removing the Transportation Fixtures 15
Mounting the Stands 16
Placing the Optical Library 17
Operation Modes 18
RS232 mode 18
SCSI mode 19
SCSI Cable Requirements 19
SCSI cable length 19
Setting the SCSI ID´s for the Drives 20
Connecting to a Host Computer 21
Connecting the serial robotic interface 21
Connecting the SCSI Interface 22
The User Interface 25
The User Interface 26
User Interface Modes 27
Activating the User Interface 28
PIN Codes 28
Enter Admin PIN 28
Enter Service PIN 28
Change Admin PIN 28
Change Service PIN 28
Alarm 29
Mute Alarm Signal 30
__________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
4
Settings 31
Machine Defaults 31
Auto DISC 31
Auto Start 31
Event Logging 32
Event Logging Functions 32
Technical Data 33
NSM3-7000 34
DISC1-7000 35
Slot Upgrade 37
Agency Approvals 38
FCC Declaration 39
Declaration of Conformity NSM3000 40
Declaration of Conformity NSM4000 41
Declaration of Conformity NSM7000 42
Declaration of Conformity DISC1000 43
Declaration of Conformity DISC3000 44
Declaration of Conformity DISC4000 45
Declaration of Conformity DISC7000 46
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
5
COPYRIGHTS and
TRADEMARKS
■
Notice of Copyright
■
Disclaimer
■
Trademarks
■
Contacting DISC
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
6
NOTICE OF COPYRIGHT
All rights reserved. Copyright © 2004 by DISC GmbH. No part of this
publication may be reproduced, stored in a retrieval system, or traDISCitted in
any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written consent of:
DISC GmbH
Schultheiss-Kollei-Straße 5
D-55411 Bingen
Germany.
Disclaimer
DISC GmbH (DISC GmbH and all of its subsidiaries) takes no responsibility
and offers no warranty with respect to the adequacy of this documentation, or
the procedures which it describes for any particular purpose, or with respect to
its adequacy to produce any particular result. In no event shall DISC GmbH, its
employees, its contractors or the authors of this documentation be liable for
special, direct, indirect or consequential damages, losses, costs, charges,
claims, demands, or claim for lost profits, fees or expenses of any nature or
kind.
CHANGES
The following paragraph does not apply where such provisions are inconsistent
with local law. Some states do not allow disclaimer of express or implied
warranties in certain transactions. Therefore, this statement may not apply to
you: The material in this documentation is for information only and is subject to
change without notice. While reasonable efforts have been taken in the
preparation of this manual to assure its accuracy, DISC GmbH assumes no
liability resulting from any errors or omissions in this manual, or from the use of
the information contained herein.
DISC GmbH reserves the right to make changes in the product design without
reservation and without notification to its users.
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
7
Additional Information may be obtained from:
DISC GmbH
Schultheiss-Kollei-Straße 5
55411 Bingen
Germany
TRADEMARKS USED IN THIS MANUAL
DISC, and the DISC logo are registered trademarks of DISC Group
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
8
CHAPTER 2:
SAFETY INSTRUCTIONS
■
Intended Use
■
Residual Risks
■
Safety
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
9
RAPID METHOD
DISCx000: DICC1000 NSMx000: NSM3000
DISC3000 NSM4000
DISC4000 NSM7000
DISC7000
INTENDED USE
The NSMx000 and DISCx000 Optical Libraryes are controlled by a host
computer or combined server unit (NAS). The Optical Libraryes were
designed exclusively to read and write bare media, especially the Blue Laser
(PDD, PD, BD) media, CD/DVD media and are not intended for any other
use.
Improper use of the Optical Libraryes may cause residual risks if they are
used or operated by unauthorized individuals. Any person who uses the
Optical Libraryes should read and understand the user´s manual and
especially the safety instructions.
Residual Risks
Disregarding the safety messages can cause damage to the unit or result in
personal injury. Ban of Arbitrary Reversions and Changes The Optical
Libraryes may not be altered due to applicable safety regulations.
BAN ON ARBITRARY REVERSIONS AND
CHANGES
The Optical Library must not be altered or changed in any way that does not
comply with applicable safety regulations.
REPAIRS
Repairs must be carried out only by DISC staff, or DISC authorized service
providers.
DISC will not be liable for any damage caused from repair by unauthorized
individuals. Repair by unauthorized individuals may void your warranty.
_________________________________________________________
143715-F NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
10
Fire Damages
To reduce fire or shock hazard, do not expose the units to rain or moisture.
OPENING THE UNIT
To prevent electrical shock, remove line cord before opening the unit!
Do not leave one of the side walls open while the Optical Library is
powered on! Beside danger of injury, incidence of light will disturb the
media detection and incomming dust may affect the read/write ability of
the media!
SAFETY
This product is in the used way a Laser Class 1 device. Disc access is
accomplished via a laser beam. The laser beam does not represent any risk for
the user.
This product complies with the DHHS Rules 21 CFR chapter 1, sub chapter J,
accession number 9520184, applicable at the date of manufacture.
Caution:
The built in drives become under Laser Class 2M and 3B radiation if they get
opened! This includes the risk of injury if you stare into the beam or expose
something to the beam. You must not remove and open an optical drive of
this Optical Library!
Ce manuel convient aux modèles suivants
6
Table des matières
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
