Directed Electronics VIPER 5901 Manuel utilisateur
Model 5901
Security and Remote Start
Owner’s Guide
© 2008 Directed Electronics, Vista, CA
G5702V 2008-07
Contents
Government regulations .....................................................................................5
Warning! Safety first .........................................................................................6
What is included...............................................................................................9
Important information ........................................................................................9
Your warranty...........................................................................................9
Replacement remotes...............................................................................10
Out of Range Notification........................................................................10
System maintenance ...............................................................................10
Charging the Battery...............................................................................11
Low battery indicator ..............................................................................11
Battery Replacement................................................................................12
Responder LC 2-Way.......................................................................................13
LC 1-way companion.......................................................................................14
Transmitter configuration..........................................................................14
LCD Iayout.............................................................................................15
LCD icons ..............................................................................................15
Feature List:............................................................................................17
Using the system .............................................................................................22
Arming the system...................................................................................22
While the system is armed .......................................................................23
Modified Arming Modes..........................................................................24
Disarming the System ..............................................................................26
System override......................................................................................27
Using the remote start ......................................................................................29
Before using your Remote Start .................................................................29
Remote starting your vehicle.....................................................................29
Points to remember .................................................................................30
Runtime Check .......................................................................................30
Manual transmission ...............................................................................31
Timer mode............................................................................................32
Turbo timer mode....................................................................................35
Safety features ...............................................................................................37
Starter anti-grind circuitry.........................................................................37
Disabling the remote start system ..............................................................37
Diagnostics ....................................................................................................38
Arming .................................................................................................38
Disarming .............................................................................................39
System status chirps ...............................................................................39
Table of zones........................................................................................40
Interpreting zone diagnostics....................................................................40
Nuisance prevention® circuitry ................................................................41
Owner recognition .........................................................................................42
Rapid resume logic..........................................................................................42
Power saver mode...........................................................................................43
System...................................................................................................43
2-way remote .........................................................................................43
Programming options.......................................................................................44
Security & convenience expansions ...................................................................46
Glossary of terms............................................................................................48
Quick reference guide .....................................................................................55
Limited lifetime consumer warranty ....................................................................57
5
© 2008 Directed Electronics. All rights reserved.
Government regulations
This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Remote Controls
To satisfy FCC RF exposure compliance requirements, this device should be used
in hand-held, hand operated configurations only. The device and its antenna
must maintain a separation distance of 20 cm or more from the person’s body,
except for the hand and wrists, to satisfy RF exposure compliance. This device
is designed to be used in a person’s hands and its operating configurations do
not support normal transmissions while it is carried in pockets or holsters next to
a person’s body.
6© 2008 Directed Electronics. All rights reserved.
Control Center
To satisfy FCC RF exposure compliance requirements, the device and its antenna
must maintain a separation distance of 20 cm or more from the person’s body,
except for the hand and wrists, to satisfy RF exposure compliance.
This device complies with the Industry Canada Radio Standards Specification
RSS 210. Its use is authorized only on a no-interference, no-protection basis; in
other words, this device must not be used if it is determined that it causes harm-
ful interference to services authorized by IC. In addition, the user of this device
must accept any radio interference that may be received, even if this interference
could affect the operation of the device.
WARNING!
Changes or modications not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate this device.
7
© 2008 Directed Electronics. All rights reserved.
Warning! Safety first
The following safety warnings must be observed at all times:
Due to the complexity of this system, installation of this product must only be
performed by an authorized Directed dealer.
When properly installed, this system can start the vehicle via a command signal
from the remote control transmitter. Therefore, never operate the system in an
enclosed area or partially enclosed area without ventilation (such as a garage).
When parking in an enclosed or partially enclosed area or when having the
vehicle serviced, the remote start system must be disabled using the installed
toggle switch. It is the user’s sole responsibility to properly handle and keep out
of reach from children all remote control transmitters to assure that the system
does not unintentionally remote start the vehicle. THE USER MUST INSTALL A
CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJA-
CENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING
AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE
AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole
responsibility of the user.
Remote starters on manual transmission vehicles operate differently than those
with automatic transmission
because you must leave your car in neutral. You
must read this Owner’s Guide to familiarize yourself with the proper procedures
regarding manual transmission remote starters. If you have any questions, ask
your installer or contact Directed at 1-800-753-0600.
Before remote starting a manual transmission vehicle, be sure to:
Leave the vehicle in neutral and be sure no one is standing in front or•
behind the vehicle.
Only remote start on a flat surface•
Have the parking brake fully engaged•
8© 2008 Directed Electronics. All rights reserved.
WARNING!
It is the responsibility of the owner to ensure the parking/emergen-
cy brake properly functions. Failure to do so can result in personal injury or prop-
erty damage. We recommend the owner have the parking / emergency brake
system inspected and adjusted by a qualified automotive shop bi-annually.
Use of this product in a manner contrary to its intended mode of operation may
result in property damage, personal injury, or death. (1) Never remotely start the
vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with
the keys in the ignition. The user must also have the neutral safety feature of the
vehicle periodically checked, wherein the vehicle must not remotely start while
the car is in gear. This testing should be performed by an authorized Directed
dealer in accordance with the Safety Check outlined in the product installation
guide. If the vehicle starts in gear, cease remote start operation immediately and
consult with the authorized Directed dealer to x the problem.
After the remote start module has been installed, contact your authorized dealer
to have him or her test the remote start module by performing the Safety Check
outlined in the product installation guide. If the vehicle starts when performing
the Neutral Safety Shutdown Circuit test, the remote start unit has not been
properly installed. The remote start module must be removed or the installer must
properly reinstall the remote start system so that the vehicle does not start in gear.
All installations must be performed by an authorized Directed dealer.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN
GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT-
ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT
IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY
CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU-
THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED
REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR
PAY FOR INSTALLATION OR REINSTALLATION COSTS.
9
© 2008 Directed Electronics. All rights reserved.
This product is designed for fuel injected vehicles only. Use of this
product in a standard transmission vehicle must be in strict accordance
with this guide.
This product should not be installed in any convertible vehicles, soft or
hard top with a manual transmission. Installation in such vehicles may
pose certain risk.
10 © 2008 Directed Electronics. All rights reserved.
What is included
One ve-button/2-way Supercode Responder LC Remote Control •
(p/n 7752V)
One ve-button/ 1-way Supercode remote • (p/n 7652V)
The control module with Stinger™DoubleGuard®two-stage shock •
sensor
Control center (installed out of sight on your vehicle) with inte-•
grated status LED and Valet override switch (P/N 6711T)
Revenger™Soft Chirp™six-tone siren•
A remote start defeat toggle switch•
Battery charger•
Window decals•
Your warranty registration•
Important information
Congratulations on the purchase of your state-of-the-art remote start and
alarm system. Due to the complexity of this system, it must be installed
by an authorized dealer only. Installation of this product by anyone
other than an authorized dealer voids the warranty. All dealers are
provided with a preprinted dealer certificate to verify authorization.
By carefully reading this Owner’s Guide prior to using your system,
you will maximize the use of this system and its features. You can print
additional or replacement copies of this manual by accessing our web
site at www.directed.com.
➢Your warranty
Your warranty registration must be completely filled out and returned
within 10 days of purchase. Your product warranty will not be validat-
Autres manuels Directed Electronics Démarreur à distance
Directed Electronics
Directed Electronics AutoCommand 25622 Guide de démarrage rapide
Directed Electronics
Directed Electronics 7111A Manuel utilisateur
Directed Electronics
Directed Electronics AutoCommand 28624T Manuel utilisateur
Directed Electronics
Directed Electronics 991 Manuel utilisateur
Directed Electronics
Directed Electronics 560T Manuel utilisateur
Directed Electronics
Directed Electronics Smart start Manuel utilisateur
Directed Electronics
Directed Electronics 4400 Manuel utilisateur
Directed Electronics
Directed Electronics Valet 562T Manuel utilisateur
Directed Electronics
Directed Electronics 4103 Series Manuel utilisateur
Directed Electronics
Directed Electronics ONE-WAY FM AUTOMATIC/MANUAL TRANSMISSION Manuel utilisateur
Directed Electronics
Directed Electronics Valet 562T Manuel utilisateur
Directed Electronics
Directed Electronics Avital G3000 7/01 Manuel utilisateur
Directed Electronics
Directed Electronics PS-4661TWE-FM Manuel utilisateur
Directed Electronics
Directed Electronics AutoCommand 41026 Guide de démarrage rapide
Directed Electronics
Directed Electronics AS-1775 Manuel utilisateur
Directed Electronics
Directed Electronics AutoCommand 28624TN Guide de démarrage rapide
Directed Electronics
Directed Electronics Valet 712T Manuel utilisateur
Directed Electronics
Directed Electronics Python 1401 Manuel utilisateur
Directed Electronics
Directed Electronics 3000 Manuel utilisateur
Directed Electronics
Directed Electronics 5301 Manuel utilisateur
