Digitus DA-71120 Manuel utilisateur

Mini enclosure for M.2 NVMe

PCIe SSD, USB 3.1 Type-C™

Manual

DA-71120

Thank you for your purchase of the USB3.1 M.2 NVMe PCIe SSD

external enclosure. This Plug & Play enclosure enables you to use M.2

NVMe PCIe SSD and gives you the connection of Super-speed USB

3.1. The product uses the USB Type-C interface，enhance ease of use

for connecting USB devices with a focus on minimizing user confusion

for plug and cable orientation

Features

•Support USB Super-speed Gen2 (10 Gbps) / Super-speed Gen1

(5 Gbps)/High-speed (480 Mbps)/Full-speed(12Mbps) operation.

•Support windows 2000/XP/ VISTA /7/8/10, Mac10.x, Linux 2.4.2

and above

•Supports M.2 modules in format 2280, 2260, 2242 and 2230 with

key M or key B+M based on PCIe (NVMe), up to 1TB or more

•Fits size: 30*22 mm/42*22 mm/60*22 mm/80*22 mm

•LED power/status indicators

•Easy installation

Specifications

•Interfaces: 3.1/3.0/2.0/1.1

•Support USB3.1 Super-speed operation

•Case material: All Aluminum

•LED indicator: Power and drive activity

•Environmental:

oPower Requirements: DC 5V supplied by the Computer

oOperating Temperature: 5 oC to 50 oC

oStorage Temperature: -40 oC to 70 oC

oOperating Humidity: 5 to 90 %, non-condensing

System Requirement

PC Requirements

•Minimum Intel Processor Pentium II/50MHz, 64MB RAM

•Windows 2000 / XP / VISTA/7/8/10

•Active USB port

MAC Requirements

•Minimum Apple G processor, 64MB RAM

•Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3

•Active USB port

Package Contents

•M.2 NVMe PCIe SSD External Enclosure

•User manual

•USB3.1 Type-C Super-speed cable

•A screw driver and some screws

Installation Hard Disk Driver

Step 1: Use a paper pin to push the hole as shown. Then open back

cover.

Step 2: Insert the SSD corresponding to the seat and PCBA

connection, then lock it. Pass into the aluminum and lock the back

cover.

Connect to Computer

1. Connect one end (type C) of the USB cable into the USB Port of

your HDD external enclosure.

2. Connect the other end of the USB cable into any active USB port of

the computer.

3. Let Windows search and install the driver automatically.

4. Open “My Computer” to see your external hard drive ready to use.

NOTE:

If the external hard disk is a new disk drive which has not been

partitioned, please refer to the Partition the External Hard Disk

chapter to prepare your USB external disk.

NOTE:

To enjoy USB 3.1 super speed up to 10Gbps, your computer must be

equipped with built-in USB 3.1 ports, or a USB 3.0 host PCI-e card

If the external hard disk is a new disk drive which has not been

partitioned, please refer to the Partition the External Hard Disk

chapter to prepare your USB external disk.

Drivers Installation

Windows 2000/ XP/VISTA/ 7/8/10

The product is supported by Mass Storage Device within

WINDOWS2000/XP/VISTA/7/8/10 system directly you do not need to

install any drivers. When the USB External Drive is used for the first

time your PC system will detect a USB Storage Device and

automatically install the drivers for [USB Mass Storage Device] from

the installed system.

macOS

•macOS 8.6

If you are using macOS 8.6, the software of Mass Storage

Support 1.3.5 is required for installation. You can download

The USB Mass Storage Support 1.3.5 from the Apple Software

Updates web site http://www.apple.com/support.

•macOS 9.0 or later

You don’t need to install this software if you have installed

macOS 9.0 or above. When you connect the product with the

Mac computer, the mass storage volume should appear on

the desktop in a few seconds automatically.

Disconnect to Computer

Windows 2000/ XP/VISTA/ 7/8/10

1. Double-click on the [Unplug arrow icon or Eject Hardware] icon in

the system tray. Dialog box appears as on the right.

2. Highlight the [USB Mass Storage Device] in the dialog box, click on

[Stop], choose the USB External Drive that you want to disconnect,

then click on [Stop] again on next screen.

3. Wait for few seconds, the system prompts “You may safely

remove this device”.

4. You can now safely switch off the enclosure or unplug the USB

cable from the USB port of the computer.

macOS

When disconnecting your product from the computer, close all

windows and quit all running applications that are stored on the USB

External Drive and drag USB External Drive’s icon into “Trash” this

dismounts it from the Desktop prior to unplugging the USB External

Drive from the USB port.

How to Partition The External Hard Disk

WARNING!

Before you partition your hard disk, please be aware that this will

destroy all your existing data on the drive, so make sure you have a

backup! This step is usually only required the first time you install a

factory new hard drive or if you want to change the existing format.

Windows 2000/ XP/VISTA/ 7/8/10

Step 1: Right-click on [My Computer], choose [Manage]. A

[Computer Management] window will appear.

Step 2: Click on [Disk Management] on the left part of this window

and all connected disk drives will be listed in the right part. Find the

Hard Disk that you added with its partition status on the right. You

can create a new or delete an existing partition by right clicking on

this area.

Step 3: Right-click on the hard disk partition status area and choose

[New Partition...].The “New partition wizard” will appear.

Step 4: Following the "wizard” instructions to partition and format

your HDD.

Step 5: Wait until "wizard" finish formatting your SATA drive. It

should now appear in [My Computer] ready to use.

Attention:

About Windows2000/XP/VISTA/7/8, Please choose NTFS Format,

When the capacity is blow 32GB, You can choose FAT32 format.

macOS

NOTE:

macOS does not recognize NTFS formatted drives.

macOS9.2 and earlier, does not support creating partitions on an

external drive. To do that, you would need to purchase additional

third-party software. Initializing is no problem on all Operating

Systems.

macOS X, use the Disk Utility to format and create partitions on your

external disk.

•Select “Disk Utilities” in the utilities folder.

•Choose your external drive and format it according to your

requirement.

FAQs:

Q: I can't find the drive under my computer, why?

A: Please make sure your new hard disk has been partitioned.

Q: After plugging the USB port, the drive is not spinning at all, why?

A: The USB cable doesn't connect successfully

Q: After installing the drive. Why it is still recognized as “Unknown

device”

A: This means the USB3.1 HOST driver installation is not successful;

Try disconnecting the cable, waiting 10s, then reconnecting it. If the

drive is still not recognized, restart your computer and try again.

Q: My computer doesn't have USB 3.1 port, Can I use USB 3.1 host

Adapter?

A: USB 3.1 host adapter works in the same way as the built-in USB

ports.

Disclaimer

macOS is a trademark of Apple Inc., registered in the U.S. and other

countries.

The product name and brand name may be registered trademark of

related manufacturers. ™ and ® may be omitted on the user manual.

The pictures on the user manual are just for reference, and there may

be some slight difference with the real products. We reserve the

rights to make changes without further notice to a product or system

described herein to improve reliability, function or design.

Hereby Assmann Electronic GmbH, declares that the Declaration of

Conformity is part of the shipping content. If the Declaration of

Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Table des matières

Autres manuels Digitus Enceinte

Digitus

Digitus DA-71050 Manuel utilisateur

Digitus

Digitus SoHo DN-19 U-S-1 Series Guide de l'utilisateur

Digitus

Digitus DA-71115 Manuel utilisateur

Digitus

Digitus DA-71115 Manuel utilisateur

Digitus

Digitus DA-71051 Manuel utilisateur

Digitus

Digitus 2-PORT NAS SATA HDD ENCLOSURE Instructions d'utilisation et d'entretien

Digitus

Digitus DA-70570-BA Manuel utilisateur

Digitus

Digitus USB 2.0 External Enclosure 2.5" (6,35cm) Manuel utilisateur

Digitus

Digitus USB 2.0 External Enclosure 2.5" (6,35cm) Manuel utilisateur

Digitus

Digitus Enclosure 3.5" Manuel utilisateur

Digitus

Digitus DA-71111 Manuel utilisateur

Digitus

Digitus DA-70557 Manuel utilisateur

Digitus

Digitus DA-71110 Manuel utilisateur

Digitus

Digitus DA-71113 Manuel utilisateur

Digitus

Digitus DA-70550-1 Manuel utilisateur

Digitus

Digitus DA-71112 Manuel utilisateur

Digitus

Digitus DA-71106 Manuel utilisateur

Digitus

Digitus DA-70577 Manuel utilisateur

Digitus

Digitus DA-71104 Manuel utilisateur

Digitus

Digitus DA-71116 Manuel utilisateur

Digitus

Digitus DA-71105-1 Manuel utilisateur

Digitus

Digitus DA-70585 Manuel utilisateur

Digitus

Digitus DA-71105 Manuel utilisateur

Digitus

Digitus DA-71030 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur

NewerTech

NewerTech Voyager S3 Manuel utilisateur