Digitus DA-70550-1 Manuel utilisateur

IDE to USB2.0

HDD External Enclosure 2.5

(DA-70550-1)

User Manual

I. Foreword

Congratulations on your purchase of our product! We will show you

a new storage concept with safety and convenience. It is our

pleasure to give you the best solution to expand your HDD`s

Capacity and enhance your data`s reliability in PC system or Mac

system. Before using the product, please read this manual

carefully for further recognizing of the product.

II. System Requirement

Basic environment for setup this device:

Hardware requirement: a PC, Notebook or Mac system with free

USB interface;

Operation system: Windows98SE/ME/2000/XP/Vista/7, Mac OS 8.6 or above.

III. Feature

* Compliant with USB2.0/USB1.1 standard

* Support Plug-Play and Hot-Plug.

* Transfer rate available for 480Mb/s,12Mb/s.

* Power Supply: Bus power or self-power.

IV. Package

Check fittings

Before using the product, please check the fittings in the

package compliant with the below. If not, please contact the local

dealers timely.

* one USB Enclosure

* one USB Combination cable

* one User 's Manual

* one CD Driver

V. Hardware Installation

Install a 2.5" IDE HDD into the enclosure

1. Put out the PCB board with back case.

2. Paste the HDD label to the HDD bottom.

3. Attach the 2.5" hard disk drive (HDD) to the 44pin connector of

the PCB board

4. Slide the HDD with PCB board into box

5. Fix the screws tightly.

VI. Driver Installation

a. Driver setup mode under Windows98SE

1)Start the operating system mentioned above

2)Connect the USB external box(which have installed a HDD) and PC

with USB cable

3)System will automatically detect new device and search the suitable

driver

4)Insert the CD driver and select [search available driver], and click

[Browse]

5)Point and select the relative disk drive such as [G]

6)System will find the suitable file and finish the installation

Automatically.

b. Setup under Windows2000/XP/Vista/7

Under system Windows Me/2000/XP/Vista/7, system will automatically

detect the new hardware and finish setup!

c. Setup mode under Mac OS system

If your system is Mac OX 8.6 or above, the system can find the

driver direvtly. If your system is 8.6 , you have to download and

setup"USB MASS STORAGE SUPPORT1.3.5"from SOFTWARE

SUPPORT

Website:http://www.apple.com/support

VII. Power Supply:

If your HDD needs more than 500mA for function or work

stably while using only the USB Bus-power, you should apply an external power supply

for this unit

Connect the USB extended power jack:

1. Connect the HDD installed enclosure to your computer's USB/FW

port with the USB2.0 multiple/FW cable

2. Connect the red color of USB extended power jack which been

mounted on the enclosed USB2.0 multiple cable to your computer's

the other USB port

DATA USB Connector

To External Box

Mini USB Port Color:RED

Power USB Connector

Warning:

Before removing this unit from your computer, please finish the

following procedures for a safe removal:

1). Click the icon in the [Desktop] window of your computer

2). A [Safely Remove Hardware] message window will appear, click

the [Stop] button

3). [It is now safe to remove the USB device] message will appear,

close the [Safely Remove Hardware] window

4). Remove (Power off) the USB extended power jack if it is applied.

Now you can safely remove the enclosure!

Disclaimer

All the information in this document is subject to change without prior notice The

manufacturer makes no representations or any warranties regarding the Contents of this

manual. The information contained in this manual is provided for the general use by the

customers. No part of this document may be reproduced or transmitted in any form by

any means without the express written permission of The manufacturer. All brand names

and product names used in this document are trademarks or registered trademarks of

their respective holders.

Table des matières

Autres manuels Digitus Enceinte

Digitus

Digitus 2-PORT NAS SATA HDD ENCLOSURE Instructions d'utilisation et d'entretien

Digitus

Digitus DA-71115 Manuel utilisateur

Digitus

Digitus USB 2.0 External Enclosure 2.5" (6,35cm) Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

Digitus

Digitus DA-70557 Manuel utilisateur

Digitus

Digitus DA-71110 Manuel utilisateur

Digitus

Digitus DA-71113 Manuel utilisateur

Digitus

Digitus SoHo DN-19 U-S-1 Series Guide de l'utilisateur

Digitus

Digitus USB 2.0 External Enclosure 2.5" (6,35cm) Manuel utilisateur

Digitus

Digitus DA-71050 Manuel utilisateur

Digitus

Digitus DA-71116 Manuel utilisateur

Digitus

Digitus DA-71106 Manuel utilisateur

Digitus

Digitus Enclosure 3.5" Manuel utilisateur

Digitus

Digitus DA-71051 Manuel utilisateur

Digitus

Digitus DA-71104 Manuel utilisateur

Digitus

Digitus DA-71105 Manuel utilisateur

Digitus

Digitus DA-71112 Manuel utilisateur

Digitus

Digitus DA-71120 Manuel utilisateur

Digitus

Digitus DA-70577 Manuel utilisateur

Digitus

Digitus DA-71105-1 Manuel utilisateur

Digitus

Digitus DA-70570-BA Manuel utilisateur

Digitus

Digitus DA-71111 Manuel utilisateur

Digitus

Digitus DA-71115 Manuel utilisateur

Digitus

Digitus DA-71030 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur

NewerTech

NewerTech Voyager S3 Manuel utilisateur