Digital Watchdog DWC-V7553W Manuel utilisateur

Quick Start Guide Quick Start Guide

1. The mounting surface must withstand ﬁve times the weight of

your camera.

2. Do not let the cables get caught in improper places or the electric

line cover can be damaged. This may cause a short or ﬁre.

3. Detach the camera’s dome cover by loosening the 2 screws on the

dome using the included torque wrench.

4. Use the mounting template to mark and drill the necessary holes in

the mounting surface.

STEP 1 – PREPARING TO MOUNT THE CAMERA

Pass the wires through the mount bracket and make all

necessary connections. Connect the BNC cable and power

cables to the camera.

STEP 2 – CABLING THE CAMERA TO

EXTERNAL DEVICES

Power

Requirements Power Consumption

DC12V DC12V: 2W, 176mA

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

DWC-V7553W

WHAT’S IN THE BOX

Mount bolts

and nuts 1 Set

Template

sheet

for bolt

and nut

installation

1 Set

Torque

wrench 1 Set Quick Setup

Guide 1 Set

Screw and

plastic

anchor-2pcs

1 Set Test video

cable 1 Set

Protection sticker

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Attention: This document is intended to serve as a quick reference for

initial set-up. It is recommended that the user read the entire instruction

manual for complete and proper installation and usage.

NOTE: Download all your support materials and tools in one place

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in

the ‘Search by Product’ search bar. Results for

applicable part numbers will populate automatically

based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

Quick Start Guide

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To

switch between the signals:

a. Enter the camera’s OSD menu. You can access it locally from

using the camera’s joystick in the body of the camera, or from a

recorder supporting UTC communication. Go to SETUP >

OUTPUT > ANALOG MODE.

b. Set the camera’s analog signal output from the following

options:

• HD-A: supports 5MP/1944p @ 20fps and 12.5fps, 4MP/1440p

@ 30fps, 2.1MP/1080p @ 30fps and 720p @ 30fps.

• HD-T: supports 5MP/1944p @ 20fps, 4MP/1440p @ 30fps,

2.1MP/1080p @ 30fps and 720p @ 30fps.

• HD-C: supports 4MP/1440p @ 30fps, 2.1MP/1080p @ 30fps

and 720p @ 30fps.

• CVBS: supports up to 960H @ 30fps

c. Change CONFIRM to ON to save the changes.

d. Go to the EXIT menu and select SAVE&EXIT to save all changes.

The camera signal automatically.

1. Once all cables have been connected, use the screws included

with the camera to properly mount and secure the camera to the

mounting surface.

2. Adjust the camera’s pan, tilt and position to achieve the desired

view. The cameras’ max angles are:

Pan: 0° ~ 355°

Tilt: 0° ~ 70°

Rotation: 0° ~ 360°

3. Once the installation is complete, remove the protective ﬁlm from

the camera’s dome cover. To remove it, loosen the screw on the

decorative ring and rotate the ring counter-clockwise to remove.

STEP 4 – INSTALLING THE CAMERASTEP 3 – CHANGING THE SIGNAL IN

THE CAMERA

Rev Date: 06/19

Speciﬁcations and pricing are subject to change without notice.

Template

Sheet

1. Using the bolt and nut mounting template, mark and drill the

necessary holes in the mounting surface.

2. Pass wires through and make all connections (see STEP 2 for more

information).

3. Secure the two long mounting screws to the camera’s base.

4. Mount the camera to the mounting surface by using the 2

mounting nuts.

Rotate the locking discs over the screws until the camera is held

tightly from the mounting surface.

For a bolt and nut installation:

Rotation 360°

Titling 70°

Panning 355°

Autres manuels Digital Watchdog Caméra de sécurité

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi28A Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MT95WiATW Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight D1363D Manuel utilisateur

Digital Watchdog

Digital Watchdog BL352IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MF10M28T Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight D2363TIR Series Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-D362D Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-D4583WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-BL2553DIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MB95Wi28T Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-B1365T Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-D4365T Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-light Plus DWC-B6883WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Snapit DWC-V4382D Manuel utilisateur

Digital Watchdog

Digital Watchdog Snapit DWC-HV421D Mode d’emploi

Digital Watchdog

Digital Watchdog MEGApix DWC-MPF5Wi4TW Manuel utilisateur

Digital Watchdog

Digital Watchdog D1362D Series Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight D1363D922 Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-V4283WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Snapit DWC-HD421D Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MVA5Wi28T Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus HD over Coax... Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur